What can be cooked from squid: quick and tasty

In many cases, the garage serves universal workshop... Tools for all occasions are stored here: both for car repairs and for repairing home furniture.

This function is greatly expanded if the garage is built with country house or in the country. Here the owner simply has to be of all trades master- lay the electrical wiring to the gazebo, sharpen the knife and ax, repair the lawn mower, refuel and lubricate the snow blower, plow a new one wooden beam for a leaky support under grapes ...

All these troublesome jobs require various instruments and devices that you probably have for a long time.

But how can they be conveniently and efficiently placed?

Zoning garage space

First of all, we will go into the garage with a tape measure, a pencil, a notebook and a strong desire to finally get rid of the rubbish that it was a pity to throw away for years - what if it ever comes in handy?

The design fundamentals of such industrial and warehouse utility rooms presuppose their clear functional zoning.

But in the meantime, you have long, without knowing it, distributed the garage into functional areas.

In one, at the entrance, something is kept at hand. daily, and gathering dust in the far corner rarely demanded... Small tools are mixed together in a small box, heavy hammers and sledgehammers rusting under the wall on the floor. Somewhere in a bunch there are containers with antifreeze and transmission oil.

We will apply this intuitively correct distribution when designing ordered arrangement of tools.

First, let's estimate and draw

We define the wall, along which we will build racks and shelves for tools. The data on its height and width entered in the notebook will become Starting point for drawing future storage structures.

Having made a decision on the location of the instruments, we divide, in turn, "Instrumental" zone on clear structures where the tools, fixtures and fasteners will be located:

• for the car (locksmith);
• for electrical work;
• for welding works;
• for carpentry work.

DIY tool shelves in the garage: materials and design

Tool rack design and material, from which it will be made, will determine the size of the free space in which it will be "inscribed", as well as your technical imagination and acquired or completely absent skills of such works.

In any case, it is reasonable to precede your own project by visiting the Internet sites of garage self-builders, where successful projects of garage interiors that have already been implemented are on public display.

But the main factor of choice is your budget, i.e. the amount that you are willing to spend in the name of garage comfort.

DIY tool shelves in the garage - photo:

Convenient and simple shelving

The offered tool rack is just a concept, a sketch of one of possible designs, so there is no point in specifying the exact dimensions. With the numbers of sizes you will fill your individual project.

Based on considerations of strength and durability, we will make a solid rack with uneven-height shelves from a 50x50 mm steel corner along the garage wall. We will make shelves from edged boards 4-5 cm thick.

We need a grinder with discs for cutting metal, welding machine, a pair of packs of electrodes, an electric drill, a carpentry corner, a water level, a joiner's hacksaw, a tape measure, a marker.

The number of supporting racks depends on the length of the rack. The step between them (respectively - the length of the shelves) is determined in 1 m.

Important: We lay the width (depth) of the shelves in such a way that they do not interfere with opening the doors of a car that has entered the garage. If this condition is met, a convenient shelf width will be 40-50 cm.

We mark the corner, cut and weld the rectangular perimeter of the rack from it. According to the drawing, we mark, cut and weld the transverse corners into the perimeter, on which there will be lean wooden shelves... We design them of different heights, based on the dimensions of the tools planned for placement.

Do not forget about the special low section for boxes with fasteners.

Place the first shelf at a height 60-80 cm from floor level garage. In this lower space we will place fuel cans, bulky and heavy objects, spare units.

Racks weld on to the reinforcement rods driven into the wall. At the top and in the middle, we weld the racks of the rack with a horizontal crosspiece from a corner or a steel strip.

Now it's time to grab a hacksaw and cut the boards to size. Before installing board shelves soak with hot linseed oil, in a day we paint.

We hang everything that can be hung

Box spanner sets can be conveniently, clearly and beautifully hung in increasing size on brightly colored boards attached to the wall in the back of the shelves. Above each key can be glued paper sticker with size, large printed on a printer, or write the numbers by hand with an indelible marker directly on the board.

Making the most of vertical surfaces, in the same way we will hang hammers, pliers and other tools with a suitable configuration for such placement on the side walls of the rack.

Watch an interesting video on how to make a key shelf in the garage with your own hands:

Conclusion

Many motorists have had garages for a long time. well equipped, the instruments are placed rationally and conveniently - so that they can be taken from their usual place with closed eyes.

Please, tell us about your comfortable garage, share your experience with novice colleagues on this truly masculine hobby.

Many men use the garage for more than just a parking lot. Often tools or old things are stored in the garage, which are a pity to throw away, but there is no place in the apartment for them. Also, repair or other work is often carried out in the building, requiring the presence of tools and dimensional material. Thus, the building often becomes like a warehouse.

Wall or hanging shelves in the garage are a great way to store a lot of things without cluttering up the useful area of ​​the room.

Durable and reliable material designed for heavy loads. Metal shelves can withstand a lot of weight, it is convenient to store parts and tools on them. Also, the metal is durable and wear resistant. If the material is coated with a special composition against corrosion and rust, then the structures made of it can serve for many decades.

Unlike metal, wood is more affordable. Easy to process, does not require welding. Wooden shelves can also serve for a long time, the only drawback is low resistance to changes in temperature and humidity conditions.

To improve the wear resistance and durability of the wooden elements of the shelves, it is required to periodically cover the material with special covering paints. This will help the wood to avoid rotting, deformation and damage by pests.

The rest of the materials, such as plastic, plywood, stone, are rarely used for the manufacture of shelves.

Constructive variations of hanging shelves

They can be open or closed. With or without back wall. Most often, a metal corner and a wooden base are used for the manufacture of such structures. They are hung on the walls with anchors. The type of attachment can be permanent or removable.

These structures are made of a metal corner, a wooden base; a special cable or a metal round profile, fixed on special anchors, is used as the side walls.

These shelves are hung on special hooks, hammered in or welded into ceiling beams overlap. The advantages of ceiling shelves are quick dismantling if necessary. Disadvantages - a rather wobbly structure, which can swing from touching.

It is not recommended to store expensive tools or fragile items on such shelves.

Shelf in the form of a shield for tools

This design is equipped with small shelves for storing small items and special hanging fittings. The shield consists of a sturdy back wall, anchored in the wall. Shelves, special hooks or tool holders are mounted on the wall.

This shelf is very convenient for carpentry and locksmith work. Most often, such a shield is hung in front of the workbench so that all the necessary tools are at hand. Sometimes the shield is equipped with additional lighting in the form of a lamp on a movable leg.

If you want to save money useful area premises, then you can make a hanging shelf with a ceiling mount with your own hands.

Materials required for the manufacture of the structure

Tools for the job

1. Drill with a drill for wood. The drill diameter must match the diameter of the stud.
2. Rotary hammer for drilling holes in the ceiling for fastening anchors. The drill should be slightly smaller than the anchor diameter.
3. Wrenches, their marking must match the size of the nuts used.
4. Jigsaw.
5. Screwdriver.
6. Bubble level.

Work order

Step 1. To begin with, a shelf of the desired width and length is cut from a sheet of plywood or fiberboard.

It is worth knowing that it is recommended to place load-bearing pins with an average load on the material after 60-70 cm. If the shelf is longer, then over time, the plywood or fiberboard sheet will noticeably bend and sag.

Step 2. To increase the strength of the material, a metal profile equipped with internal stiffeners can be fixed at the ends of the plate.

Step 3. Holes for studs are marked along the edges of the shelf. It is worth knowing that it is advisable to drill 5-7 cm from the edges of the slab. If the holes are too close to the ends, the material may crumble under the weight of the items on the shelf.

Step 4. After the holes have been drilled, the shelf must be attached to the ceiling and, using a pencil, transfer the location of the holes to the ceiling. Thus, the structure will be located without distortions and there is no need to be afraid that the pins are deformed.

Anchor holes are drilled in the ceiling, dust is removed from them. The anchors are driven into the concrete until they stop and the nuts are tightened.

Long metal studs are connected to anchors placed on the ceiling. The connection is fixed with nut-sleeves. It is also advisable to secure the connection with an additional conventional nut, which is screwed onto the thread of the stud.

Step 5. After the studs are firmly fixed to the ceiling, the shelf installation period begins. A nut is screwed onto the stud, then a washer. After that, a shelf is strung at the ends of the studs.

The shelf is fixed using a Grover washer and a control nut. Washers protect the shelf openings from breaking under load. The grover protects against loosening of the fastening nut. You can use two nuts for safety and greater structural strength. The final adjustment of the fixing hardware is carried out at the level.

This hanging shelf will significantly save space in the garage. The only drawback is the mobility of the structure. You can eliminate it using a special metal corner. One edge of the corner is attached to the wall, the other to the base of the shelf. In this way, the entire suspension structure is fixed. Also, the metal corner will strengthen the shelf, which will affect its durability.

DIY tool shelf

In order for the whole small tool was at hand during locksmith or carpentry work, you can think over and make a special shield. Shelves-shields do not differ in high carrying capacity and strength, heavy tools cannot be stored on them, but for small and necessary things that are always lost, such a design will be ideal.

It's important to know!

1. It is advisable to hang the shelf with the tool on a plastered wall, otherwise condensation will accumulate between the brick or block surface and the wall of the shelf. Constant high humidity will negatively affect the shield material, may cause it to deform or rot.
2. Average load for one square meter the surface of the backboard should not exceed 14 kg. Weighting the structure will lead to rapid destruction.
3. The height of the backboard is determined by the height of the garage owner. The top edge of the shelf should not be taller than a human being. Otherwise, it will be inconvenient to take tools from the shield.
4. If the shelves are thought out on the shield, it is not advisable to make them closed. It will also make the job more difficult. All small tools and parts should be in the public domain.

How to make a shield with your own hands

Materials and tools

Step 1. First you need to choose the size of the shield. Most often, such a shelf is fixed in front of the workbench, at which a person is engaged renovation works... It is desirable that the width of the shield is not much larger than the dimensions of the workbench.

Step 2. Then a shield is cut out of plywood or other material. Immediately, a place for small shelves is marked on it.

Step 3. Then, with the help of a jigsaw, shelves with side walls are cut out. The side walls of the shelves can be made the same size as the length of the backboard. Further using long screws the shelf structure is assembled and attached to the shield surface. A place for storing jars and boxes with nails and other small things is ready.

Step 4. Attaching hooks. To do this, holes are drilled in the shield and dowels are driven into them and special threaded hooks are screwed in. It is advisable to think in advance where and what instrument will be located. Proceeding from this, the hooks are drilled.

Then lugs or brackets are attached to the back wall to fix the shelf to the wall. The last step is to mount the shelf on the wall. Holes are drilled with a perforator, anchors are driven into them. If the shelf is fastened "tightly", then you can strengthen the fixation of the structure using a special washer, which will prevent the lugs from sliding off the anchor.

A simple and convenient tool and part shield is ready. If all the tools and material are available, then it can be done in a few hours.

Video - Small shelves on the wall for storing keys and other tools

Almost every man has a toolbox in his home or garage. Therefore, it is worth keeping them in perfect order. How best to do this, a new review will tell. Surely everyone will be able to find in it examples of the organization of storage that interested him.

1. Plastic canisters

2. Wooden shelf

3. Stand

4. Railing

5. Individual cells

6. Wooden shelving

7. Open locker

8. Mobile stand

9. Wooden stand

10. Homemade rack

11. Hanger

12. Clothes hangers

13. Storage system

14. Folding table

15. Glass jars

16. Vertical storage

The average garage looks pretty cluttered. The competent organization of storage systems will help to solve this problem. Instead of another closet, equip the walls with various shelves and hooks, which will neatly accommodate a variety of things, from tools to a huge boat and bicycles.

17. Magnets

Continuing the topic, we will tell you about anywhere.

Practical storage systems for your garage or workshop.
For many, a garage is not only a place to store a car, but also a real car, locksmith and carpentry workshop. Therefore, it is important that everything is always at hand and in the right place. But sometimes it is so difficult to understand the variety of screwdrivers, pliers, scissors, drills and other utensils that are stored in the "man's Eden". This roundup provides simple yet effective ideas to help you create near-perfect storage systems in your garage.

1. Magnetic tape

Magnetic tape for storing small metal parts.

Magnetic tape attached to your garage wall can be used to store drills, scissors, bolts, nuts, and other small metal parts. Such a magnetic holder is very convenient to use and will help prevent the loss of small but important parts.

2. Plastic containers

Shelving from plastic containers.

Large plastic containers and blocks of wood can be used to build a large storage rack for tools, wires, spare parts, and any other items. The organization of such a rack will allow you to put things in order and significantly save space in the workshop or garage.

3. Roof rails

Rails for trash bags and paper towels.

On one of the free walls of the garage, you can place several small rails, on which it will be convenient to place rolls of garbage bags, paper towels, sandpaper, scotch tape, skeins of rope and much more.

4. Brackets for furniture

Furniture storage brackets.

Many summer residents use a folding garage for storage outdoor furniture... So that it does not stand in the corners and does not take up much space, make a vertical rack for it with wooden or metal brackets and screw it to one of the free walls.

5. Jars

Storage of nails, bolts, screws and other little things.

Bolts, nuts, nails, screws, screws and other little things do not take up much space, but it is extremely inconvenient to store them in a mixed form. Jars with lids screwed to the bottom of a wall cabinet or under the table top will help to clean up these things.

6. Grille under the ceiling

Storage grate for pipes and skirting boards.

A plastic grate screwed into the corner of the garage under the ceiling is ideal for storing leftovers water pipes, skirting boards, profiles and other long items. Such a storage system will significantly save space in the garage and prevent possible breakdowns of fragile building materials.

7. Organizer for screwdrivers

Wooden organizer for screwdrivers.

A small practical organizer for screwdrivers that any man can make by simply drilling the required number of small holes in a block of wood. Such a product can be hung on one of the walls of a garage or workshop to keep all the screwdrivers in one place.

8. Vertical storage systems

Vertical panels for storing things.

Several perforated metal or plywood panels under a table or in a cabinet provide an ergonomic and convenient vertical storage space for small hand tools.

9. Plastic pipes

Storage systems made of PVC pipes.

The remains of PVC pipes of different diameters can be used to create a wide variety of storage systems. For example, pieces of wide pipes screwed to the bottom of the cabinet are suitable for storing a screwdriver, drill, and other tools of this type. Pieces of PVC pipes of medium diameter can be used to make cells for storing various sprays, polyurethane foam, tubes of paint and other containers.

10. Brushes

Hanging storage of brushes.

It is very convenient to store paint brushes and spatulas hanging on a thin wire or on a thin steel rod.

11. Rack for garden tools

Wooden stand for garden tools.

To garden tools did not take up a good third of the garage space, store it on a special rack bolted to one of the walls. Such a rack can be made with your own hands from blocks of wood, a wooden pallet or pieces of plastic pipes.

12. Multifunctional rack

Rack from a pallet with shelves.

A wooden pallet, complemented by shelves made of pieces of wooden slats, will become a functional component of the garage and will help to place a huge amount of hand tools and small ones in one place.

13. Rod holder

Storage of fishing rods.

A regular wire mesh can be used to create a handy rod holder. This storage system can be fixed to the ceiling so that it does not take up space below and does not get underfoot in the autumn-winter season.

14. Pegboard

A garage space is often combined with a workshop. The system for storing tools in the garage should be thoughtful. Ready-made constructions GOSNITI are considered optimal.

The DIYer who wants to save money will need materials at hand... Complex mechanisms equipped with movable elements, it is forbidden easy to store.

To make the correct placement of the tool in the garage and put things in order, there are the following options organizing storage:

• on shelves;
• on shelves;
• in closets;
• at the stands;
• on the shields.

There are shelves of various modifications:

• hinged;
• closed;
• stationary;
• mobile.

For their manufacture, use various materials such as metal or wood... Small parts require hinged shelves... They are usually placed at the level of the garage owner's chin. If the inventory has often use, for him are better suited open structures, and in closed ones they store unnecessary things.

See how you can make an interesting option for storing a garage tool with your own hands:

Direct competitors of mobile shelves are movable boxes... The device has specialized containers for the tool.

Factory garage tool racks are made in accordance with GOST... These ergonomic designs are easy to DIY. To store large units or tires, you will need large shelving.

If you want to make a tool cabinet in the garage with your own hands, then there should be special drawers or handbags... This storage allows to avoid dust ingress. You can also rationally use side walls... With the help of special tool holders in the garage, a place is equipped for fixing the planer... On the doors you can place holders made of pieces of rubber hose.

A skilled craftsman will make a stand for a tool in the garage with his own hands. The material for its manufacture is chipboard sheet... Additionally, as tool holders are used metal cans from canned food.

How to store tools in the garage?

A convenient storage place is considered shield, or storage panel, or simply garage tool board... Screwdrivers are fixed on them, spanners, pliers. To make a shield for a tool in the garage with your own hands, use an array of boards and strong hooks. The complete set depends on the master's own preferences.

How to place the tool in the garage on the wall - photo:

As you can see in the photo, storing a tool in the garage with your own hands is not at all difficult to organize. All you need is desire and a little patience.

Keeping keys with tools on the garage wall

How do I mount a tool on a garage wall? The optimal storage system for tools in the garage involves the use of the entire area of ​​the wall.

1. After installing the horizontal guides, they are suspended shelf sections... Little things like nails and self-tapping screws can be put in plastic jars that contain mayonnaise or horseradish. Their lids are screwed to the shelves.
2. Can be made for nuts, washers, scissors and for keys stand in the garage with your own hands. Special hinges make wire... Washers with nuts are strung on the split ends, and the dimensions of the fittings are indicated on cardboard tags. Scissors with keys are hung on metal hooks.
3. For drills, cutters and storage of keys in the garage, attach to the wall foam pad... They are firmly fixed in elastic material and can be easily removed from it if necessary.
4. Another mounting method for garage tools is disposable plastic plates. If you cut them into two equal parts, you get blanks... Then they are attached to the wall with self-tapping screws. The resulting pockets are used to store circular saws or grinding wheels.
5. For storage of clamps, it is recommended to use rectangular plywood box... It is attached to the wall and then the handles of the clamps are placed in it.
6. Sturdy wall mounts are designed to store bicycles... Their base must be metal.
7. In order not to lose the screwdriver the right size, for their storage use magnetic holder... Then they are always in sight.
8. From hooks with paper clips, the craftsman will quickly make device for canvases designed for tape slabs.

Convenient panel for storing tools in the garage, which does not take up much space: