What can you cook from squid: quick and tasty

How to make a drain in the shower of a wooden house

It all starts with drawing, planning and design. Rooms (kitchen, bathroom, toilet, shower) that need sewerage and water supply should be located as close as possible. The piping scheme is not tied to harsh conditions, therefore, it is formed based on the style of the interior, common sense and the laws of mechanics.

• Pipes with a diameter of 100-120 mm are used to drain toilet waste. The minimum overall length is 10 m
• For outlets from the kitchen and bathroom (gray drains), pipes with a diameter of 50 or 40 mm are used
• It is better to make turns and bends of the sewer at an angle of 45 degrees. This is the optimal angle to reduce the risk of blockages.
• For the technical rooms of a new house, it is better to use PVC (polyvinyl chloride) or PP (polypropylene) sewer pipes.

Laying the floor in the shower room of a wooden house

The floor in the shower should not only fulfill its direct functions in terms of load and interior, but also serve as an additional guarantor of safety in the event of a water emergency.

There are two options for erecting a floor in such a shower room. This is the creation of a concrete screed and the creation of a floor on the logs. Both of these methods imply a non-leaking floor, therefore, they are made at a slope of 1-2 degrees with a further drain from the shower room into the general sewer.

The concrete floor has the best waterproofing and durability, but the worst in terms of vapor permeability and load-bearing capacity.

Algorithm for pouring a concrete floor in a shower room of a wooden house:

• Clean the floor of the room from dirt, dust, varnish or paint residues
• Carry out waterproofing groundwork using bitumen or special paints
• Create or purchase ready-made concrete mix, not lower than M300 strength and W10 water absorption. For the first floor, it is possible to use expanded clay concrete in order to improve the performance of thermal insulation
• Concrete a surface with a thickness of at least 5 cm.Lighter thickness increases the risk of cracks or deformation of the concrete base
• After 7-10 days, start decorating the decorative layer. But it is better to wait all 28 days: this period is necessary for concrete to acquire 100% brand strength

Features of installing the floor on the logs in the shower. First, the logs must be impregnated with moisture-repellent varnishes. Secondly, do not fill the voids between the lags with mineral wool, when moisture gets there, it loses all its thermal insulation properties. It is better to cover it with clean and dry expanded clay. Thirdly, it is worth making a waterproofing membrane before attaching moisture-resistant plywood or chipboard. And, fourthly, for fixing the decorative layer (linoleum, ceramic tiles, mosaic), glue brands with special hydrophobic additives are used.

Insulation of the skirting board at the joints of the floor and walls will not allow moisture to penetrate under the flooring.

Interior decoration in the shower of a wooden house

With good waterproofing and hyphadrophobic varnishes, the walls of a wooden house do not need additional interior decoration. This also applies to the soul. If there is no shower stall, then a hydro-barrier can be installed in places of direct water ingress. Its functions can be performed by both plastic panels and painted sheets of moisture-repellent plywood. The wall, decorated with glass mosaic trim with 1x1 cm tiles, looks very elegant and aesthetically pleasing. Such small dimensions allow you to create an artistic panel of any format on the wall - from geometric patterns to complex panoramic landscapes.

Finishing and decorating the ceiling in the shower of a private country house

Wooden beams look great in the interior of a wooden house, so you shouldn't hide this beauty behind a sewn ceiling. The only requirement is very good ventilation. In 90% of such situations, special forced ventilation is done. An electric fan is installed hidden behind the ceiling, humid air or steam is discharged through a special channel outside the house. If in the design project other finishes are indicated for the ceiling, using other materials, then they must have increased properties for:

• Water resistance
• Fire resistance
• Sound absorption
• Reflective

The suspended ceiling is easy to operate and install ventilation and lighting devices. And the stretch ceiling perfectly resists deformation when attaching it to the walls, if the wooden house still continues to shrink.

Options for finishing and equipment of the shower stall

After finishing the work with decorating walls and ceilings in the shower, you can close the issue with the choice of shower equipment.

Highlights to watch out for:

• The overall design of the booth must match the style of the entire interior
• The nominal pressure in the pipes of the shower equipment must correspond to the pressure of the general water supply
• It is advisable to use round or semicircular shower stalls. There are no strict restrictions, so you can install square or rectangular booths. It is advisable to secure protruding corners
• The dimensions of the booth must correspond to the physical dimensions of any of the residents of the house. While bathing, no one should experience any discomfort. If there are people with disabilities in the house, then the booths must contain all the necessary fixtures, and the interior must correspond to functional use.
• The glass in the booth must be impact-resistant. The minimum thickness is 6mm
• You should not take a booth with the dimensions "under the ceiling". A wooden house can shrink up to 3 cm in 6 years.It is better that the booth is 20-30 cm below the ceiling
• Leave at least 40 cm of free access around the booth. This will allow you to make high-quality installation, decorate the interior and use the device in the future.
• Today, the booth can be equipped with various additional functions. There are many options: you can conduct a radio or music player, use phyto-, color therapy. Sometimes a steam room is equipped, a "tropical rain" installation, sets of various massage attachments are mounted

You can handle many of the finishing works, arranging the shower and its interior in a chopped wooden house on your own. But sometimes narrow specialists should be involved in construction or repairs. The YouDo platform allows you to create an application for a specific task and select a professional contractor in a very short time. The cost of services is low.

Bathroom renovation 150 over 13 5 and turnkey toilet
will cost 90000 rub.
Turnkey execution time (3-4 weeks)

Bath (1.5 x 1.35m.) And toilet (1.1 x 0.8m), height 2.5m.

Bathroom renovation 170 to 170 and turnkey toilet
will cost 100000 rub.
Turnkey execution time (4 weeks)

Bath (1.7 x 1.7m.) And toilet (1.2 x 0.9m), height 2.7m.

Repair of the combined bathroom 150 to 185 turnkey
will cost 85000 rub.
Turnkey execution time (3 weeks)

Combined bathroom (1.5 to 1.85m.), Height 2.5m.

Repair of a combined bathroom 170 to 220 turnkey
will cost 90000 rub.

Repair of the bathroom with the demolition of the sanitary cabin and improvement of the layout (extension to the corridor or kitchen)
will cost from 110000 rub.

Repair of a bathroom and a toilet in a Stalinist house
will cost from 110000 rub.

Additional work that may affect the total cost

It is important for us that you know the exact cost of our services before bathroom and toilet repair.
There will be no extra charges during the renovation and at the end of the work.

And also you can order a partial renovation of the bathroom:

Complete replacement of water supply and sewerage 25000 rub. - 35000 rub.

Partial replacement of water supply and sewerage (1t.) - 4500 rub.

The modern homeowner, no matter what material the building is made of, does not want to give up the standard set of communal amenities. Traditionally, wood construction has been critical of the equipment inside the house in areas of high humidity. Baths, showers were taken out in a separate building, eliminating the risk of damage to natural fiber, premature damage to the structure of the main housing. A new generation of building materials has made it possible to safely operate rooms with high humidity. Today, the demand for the installation of rooms such as a toilet, a bathroom, a shower room in a wooden house has grown significantly. The range of products on the market allows you to realize original, exclusive technical and design ideas.

Shower in a wooden house is easy if you know the basic rules Source bygu.kokosome.ru.net

Mandatory shower elements in a wooden house

The foundations for a long, safe, comfortable use are laid during the design process. The homeowner has the right to form the space at his own discretion, choose materials and construction technologies. However, one should not neglect the norms and rules provided for by legislative acts, detailed in the SNIP and other documents, since the experience of many generations, including negative ones, is taken into account there. The desired shower in a wooden house will delight the owners for many years if the requirements for the following systems and elements of the room are met exactly:

1. Waterproofing, vapor barrier.
2. Lighting and electrical.
3. Water supply and sewerage.
4. The right choice of plumbing fixtures.
5. Use of materials that are optimal for wooden buildings.

Design project of a shower room in a wooden house Source modernplace.ru

The specificity of the work lies in the fact that the power structure of the house is made of wood, and some devices, materials, which are common in a city apartment or a stone, brick house, are not suitable in terms of technical parameters for installation in such structures. Recommendations and rules must be taken seriously. Not only comfort and coziness will depend on this, but also the safety of the inhabitants.

Unlike traditional brick houses, building blocks, the wooden structure is more flexible. Dynamic changes in geometry are several times higher than those of ordinary objects. Despite the fact that the period of greatest shrinkage occurs in the first year, the design continues to change in subsequent years. Noticeable distortions of the design dimensions are noted due to the influence of seasonal, operational changes in temperature and humidity. High-quality protection of wood fiber from moisture penetration significantly reduces the risk of critical defects and fluctuations in geometric dimensions. When installing a shower in a wooden house, waterproofing walls, floors, ceilings and other structural elements becomes a priority.

High-quality waterproofing is essential for a wooden house Source pinterest.com

Varieties of moisture protection

The means of protecting the structure of the house are conventionally divided into two types. Waterproofing materials that directly protect the structure of the tree, and compounds for impregnating fibers and giving them the necessary qualities. The first category includes the following products:

• Roll, sheet materials on a substrate, impregnated with bituminous compounds. Cellulose fiber (roofing paper), polymer non-woven and mesh fabrics are used as a basis.
• Bituminous coatings. The protective layer is created directly upon application. For a wooden house, you should exclude marks, thermal application with a burner.
• Polymer films, membranes. The industry offers products with and without a ready-made adhesive layer.
• Polymer painting and coating compositions. A wide range of products, many of which are versatile, but some are designed specifically for the treatment of wood surfaces.

Polymer films protect from moisture and are easy to install Source mybuilding.tips

On our website you can find contacts of construction companies that offer the service of installation and design of sewerage and water supply. You can communicate directly with representatives by visiting the Low-Rise Country exhibition of houses.

The above waterproofing materials are used to create a protective layer when decorating a shower room with decorative materials. A significant disadvantage of this category is the coating of the natural texture of natural fibers. Wooden houses are loved for the created interior, where the most important part of the decor is the beauty, color and structure of the building material. Impregnating compounds will help to preserve the charm and charm. The range of products will allow you to choose the product you need in terms of quality, revealing the best qualities of natural wood. The following product categories are offered:

• Oil impregnation. A proven method of protection for centuries. Today, products are manufactured both on natural oils, for example, linseed, and on synthetic counterparts.
• Varnishes, stains. A large category of goods under the general name includes products based on polymer resins, organic solvents, fillers. The choice of colors will help in creating an original decorative and protective film. We offer both colorless and specially tinted varnishes to imitate valuable wood species.
• Hydrophobic formulations. By the principle of action, they differ from the above products. Interaction with the surface occurs at the molecular level. The best option for a tree. The resulting film repels water, and the treated surface completely preserves the structure of the tree.

Oil impregnation has been used for centuries for waterproofing in wooden houses. Source travelerscoffee.ru

A variety of products from manufacturers in many countries differ in a wide range of performance characteristics and application technologies. When working, you should strictly follow the instructions and recommendations, maintaining the time modes, the sequence of operations and using the proposed tool.

Video description

For more information on waterproofing in the bathroom, as well as possible errors, see the video:

Lighting and electrical

According to the norms of SNIP, it is necessary to provide natural light in the bathroom. This is dictated by several reasons, the main of which is to ensure safety in order to reduce threats to health and life of people during a power outage. When choosing a place for a bathroom, shower room, you should remember this. As a rule, the number of openings in a wooden house is limited, and when designing, a special window is not provided in the standard layout. It is better to lay it during construction, and if the house is already ready, then it is advisable to make it.

The project contains the routes for laying power cables. Specific conditions for the installation of the system become special conditions, in particular, the fire hazard of the base material. Wiring is done in armored hoses, special boxes that guarantee the protection of the building from sources of fire in emergency situations and short circuits. Final output devices - sockets, switches, sensors, it is also preferable to purchase from the list of products with increased fire protection. Bathroom, toilet, shower room in a frame house must be grounded. It is better to entrust the calculation of the power supply system to a specialist, even if you plan to do the installation yourself.

Plumbing, water supply and sewerage

In principle, this type of work does not differ from an identical operation in buildings made of other materials. Attention must be paid to the passage of pipelines through walls. It is necessary to protect the tree from the inevitable condensation of moisture in the places of contact with the elements of water supply and sewerage. The problem is solved by full or partial installation of a heat-insulating and waterproofing layer. Finished products of this class are commercially available in the form of foamed polymer pipe linings. You can make a protective layer yourself. It is allowed to use all types of insulation and general-purpose waterproofing, for example, mineral wool, expanded polystyrene, liquid formulations.

All modern types of plumbing are available to the owners of a wooden house Source bg.decorexpro.com

Installation of bathtubs, sinks, toilets, shower cabins is not difficult. On the contrary, it is sometimes easier to do this operation in a wooden house, since the tree is easier to process, cut, drill. However, some recommendations will help you avoid typical mistakes. Corner elements, including shower cabins, should be carefully installed. Due to the mobility of the structure of the house, fragile elements are at risk of destruction, therefore they are mounted taking into account the dynamic changes in the geometry of the room. Special mounts, with elastic, movable connection, will save you trouble. It is safe to install the shower cubicle on one wall.

The selection and decoration of plumbing in a rustic style will look natural and interesting Source arxip.com

The method of removing water by means of a ladder is popular today. In a wooden house, you can successfully mount such a system, but taking into account the nuances of the structure of this material. Providing reliable waterproofing, taking into account the mobility of the structure, you can enjoy the results of work for many years. Together with the gangway in wooden houses, you can install a floor heating system. The operating temperature is safe for wood and such a scheme looks even less dangerous than other types of heating.

A very important element in the construction of a bathroom, shower room in a wooden house. Removing humid air becomes key. The speed of movement of air masses is also important, therefore a forced system is preferable. Wood houses are loved by users and professionals for their unique ability to maintain indoor temperature and humidity balance. Inevitably, a sharp rise in water particles in the air upsets this balance and is considered an extremely undesirable phenomenon.

Correct installation of ventilation is necessary for the safety of residents Source market.sakh.com

The functioning of a ventilation system of a passive supply and exhaust class can also successfully cope with the task, if it is installed correctly. The efficiency of the work depends on the diameter of the pipeline and the available draft. It is recommended to install an air duct with a diameter of at least 100 mm. Good traction will be guaranteed if there are no horizontal sections or turns along the laying route. A prerequisite is also a sufficient supply of fresh air instead of the removed one. Power control in such systems is one valve or their sequential installation in several places. It is advisable to involve a specialist who understands the intricacies of the profession in the design and installation of effective ventilation.

Design and finishing materials

Technical excellence is not enough today. The aesthetics of the room, including the bathroom and shower room, are also of great importance. Small restrictions associated with the peculiarities of wooden houses are not a reason for refusing to implement original, sometimes exclusive ideas and design findings. How and how to decorate a shower room in a wooden house is decided by the owner, who will be assisted by thematic programs on television and publications on specialized sites on the Internet. You can rely both on personal taste and experience, and on the opinion of professionals who offer ready-made projects.

The design of a shower room in a country house can be classic. Source pinterest.co.uk

Today, all the technologies that are used in buildings made of other materials are used in the decoration of the shower room of a wooden house. The best option would be to maintain the maximum area of ​​the supporting structures. The color and naturalness inherent in natural raw materials looks noble and dignified. But if for some reason it is decided to make a traditional finish, then it should be remembered that some techniques are undesirable or require a special approach. For example, plastering and painting work is not recommended without reliable reinforcement.

Basic materials

Particular attention is paid to the design of corners, joints and surface mates. The movable structure of a wooden house significantly changes the geometry of the premises with changes in humidity and temperature. Sometimes this feature is leveled by an elastic compensating layer. Gypsum-based compositions are preferable to sand-cement mixtures. Sealants are widely used, the elasticity of which compensates for small changes in size. When choosing finishing materials for showers in a wooden house, the owners often stop at traditional patterns, which are divided into certain groups:

1. Tiles, porcelain stoneware, other tile materials.
2. Drywall (moisture-resistant, anti-corrosion fittings).
3. Paints (for rooms with high humidity).
4. Decorative panels made of plastic, modified wood fiber (MDF).
5. Wooden slats to maintain style and accentuate interior details.
6. Expanded polystyrene finishing elements (rods, plinths, sockets).

Source dom-lady.ru

Conclusion

This is an incomplete list that can be expanded by piece products, for example, ceramic and glass panels, waterproof films and wallpapers. A good solution in a wooden house is the installation of a stretch ceiling, which, due to its elasticity, is not subject to defects when the geometry of the room changes. Well-chosen accessories and pieces of furniture will complement the shower room decoration. Toilet sets, shelves, cabinets, curtains and screens, tastefully bought by the owners, or offered by designers, will become the final chord in the design of the room.

To order the installation of a bathroom in a wooden house, use the YouDo platform. On our platform you will find low prices for plumbing services, as well as an extensive list of experienced craftsmen who carry out high-quality installation of bathrooms in wooden houses at affordable prices.

What is included in the work of the master

If you are the happy owner of a suburban wooden house, then you have already thought of a repair plan in such a room. It is especially important for living in a house to install a modern bathroom, without which a comfortable stay in a wooden house is difficult. The installation of bathrooms in a wooden house has many nuances and important points that must be taken into account during the renovation. The installation of a modern bathroom in a wooden house differs significantly from the installation of bathrooms in panel houses.

For the installation of a bathroom, you should call an experienced specialist who will help you in many matters. Our plumbers are ready to provide the following services for the installation of a modern bathroom in the house:

• arrangement of the sewer system, if you have not already done so
• ventilation system installation
• waterproofing the premises
• selection and installation of suitable plumbing equipment
• finishing the ceiling, walls and floor

First of all, sanitary facilities in any wooden houses need a sewage system. If you haven't done it yet, YouDo specialists will gladly take on such a project at an affordable price. If you already have a sewerage system in your house, you can immediately proceed to other important stages of installing a bathroom in a wooden house.

When creating bathrooms in wooden houses, one should take into account the factor of shrinkage of houses made of similar materials. If you ignore this factor and carry out the installation without taking it into account, it is likely that over time all the plumbing equipment will fail. Modern plumbers suggest installing sliding frames indoors to eliminate the effect of shrinkage. Such frames are independent of the main walls and do not lend themselves to building shrinkage, which will ensure the reliability and durability of your bathroom.

Also, such a room in the house should be well ventilated. After all, it is known that wood is a favorite material for fungi and mold, and it also lends itself well to rotting. But with the help of processing with special means and the installation of a high-quality ventilation system, you can forget about such a problem.

It is imperative to waterproof all surfaces in the room. You can use roofing materials, polymer floors for these purposes. But these methods are quite expensive and not environmentally friendly. It is much more profitable to apply proven waterproofing methods using water-repellent mixtures or roll materials. In the first case, the lubricant must be applied to the surface. In the second, just glue the walls, floors, ceilings.

You can also use regular ceramic tiles. Before applying a layer of waterproofing, be sure to treat the wooden surface with an antiseptic.

After such preparatory work, the master will connect all plumbing fixtures to the sewer and, by agreement, will finish your bathroom.

The prices of the masters for such services are varied and depend on many factors. You can find out the exact cost of a specialist's work when ordering.

How to place an order for Yuda

Our platform has such advantages as:

• convenient way to order
• rating systems
• affordable prices for plumbing services
• quick ordering of services through applications on a mobile phone

The survey of the provision of plumbing, sewerage and heating systems affects each owner of suburban real estate. Lack of plumbing facilities or faults in engineering systems are fixable!

The paramount importance of the serviceability and uninterrupted operation of water supply, sewerage and heating systems is clear to every owner of a cottage or a country house, therefore, when improving and repairing housing, it is the stage of plumbing and electrification of the building that is very important.

The long-term trouble-free operating period depends on the competent placement of sanitary-technical communications, installation and connection of plumbing fixtures.

The cost of plumbing and engineering work in the cottage

Plumbing in a country house or cottage has its own specifics: firstly, it is a complex complex of interconnected external and internal engineering networks, and secondly, the installation of individual heating. All this should be handled by a professional contingent of experienced plumbers with the appropriate equipment.

We present an approximate calculation of prices for the services we provide:

Discussing reasonable

Design of plumbing engineering systems of a country house

The efficiency of engineering networks is determined not only by the quality of the plumbing work carried out, but also by a professional approach to preliminary calculations and design of systems. When selecting plumbing equipment, the system water pressure and other nuances that are significant in terms of specifics are taken into account.

* Types of plumbing work in a cottage or a country house provide for a comprehensive organization and installation of all interconnected engineering systems.

Typical works include:

• Design of water supply, sewerage, heating systems
• Installation (replacement) of water supply, sewerage, heating systems
• Boiler room installation
• Underfloor heating water system
• Installation and connection of plumbing fixtures
• Installation of fine and coarse filters

Possible free

Heating, warm water floors and sewerage in the cottage

Completed: Replacement of heating and water supply from polypropylene to cross-linked polyethylene (Rehau) and laid the sewerage system in the house. It has become much more comfortable.

The specifics of plumbing work in a house from a bar

Installation and installation of plumbing in a house from a bar requires accuracy, since basically everything is fixed in an open (visible) way on the surface of the walls or floor. The plumber is required to be highly qualified for the masterful installation of pipes and equipment with a minimum of fixtures, so as not to spoil the aesthetic appearance of the wall or floor covering. If your house is still under construction, then a number of plumbing work must be done before installing the floor structure.

By contacting our company, you get the service of qualified plumbing works of any degree of complexity.

Balance ratio cost and quality- more than PERFECT! We bring to your attention a short list of plumbing works, for a more extensive acquaintance with the prices, follow the link: Detailed price list.

A short price list for plumbing work in cottages

Can you imagine your everyday life without cold and hot water, sewerage system, and in the cold season - without radiator heating? If not, then call!

Completed WORKS

Do you want to visit our facilities and meet a competent foreman on your way? Then take the first step!