What can be cooked from squid: quick and tasty
Reliable and safe work household, industrial generators are guaranteed if the installation of power plants was carried out by highly professional specialists with extensive experience. First of all, it is necessary to comply with all applicable standards that govern the requirements for premises, as well as direct installation.
Premises for the installation of diesel generators, installation work
The use of specialized containers allows assembly work in the shortest possible time. Such containers are equipped with a heating, cooling, exhaust gas removal system, fire extinguishing equipment, emergency shutdown and fire alarm buttons.
Installation of generators in non-specialized premises provides for a number of works on their equipment. It is rational to place an autonomous power plant in a room of sufficient area. What does it mean? The generator requires not only commissioning, but also further maintenance, respectively, there must be at least one meter of free space in the room in all directions from the installed unit.
The installation of the diesel generator will be carried out by our specialists upon the preliminary order of the client. If specialized containers are used, the cost of commissioning and start-up work is significantly reduced. If you have to build or reconstruct a room for an autonomous power plant, it is rational to draw up a project and a plan for all work.
After the electrical installation of the diesel generator is completed, the specialists start it up, test it and all the work is handed over to the customer. For further Maintenance it is worth immediately concluding a formal agreement.
Benefits of cooperation with our company
When working with our company, you are guaranteed to receive a number of advantages. Firstly, you can purchase any models of power plants of different capacities from us. When choosing, it is convenient to use an extensive catalog. Secondly, the cost of our services for the installation of household, industrial power plants is always affordable. This is due to the extensive experience and high productivity of professional installers. Our master can diagnose a diesel generator by ear. To do this, he does not need devices of the level of computerized vibration analyzers with fast Fourier transform, or even the simplest Flucke vibrometers. And this means you save your own time, money, get professional services from High Quality and a guarantee that the generator will properly perform the functions assigned to it for temporary or permanent autonomous power supply.
Name of service |
Price in rubles |
||
1 standard hour - 2200 rubles. (up to 100 kVA), 2800 rubles. (> 100 kVA) |
|||
I. Departure to the customer |
|||
1 | in Moscow within the Moscow Ring Road | km | 3500 |
2 | outside the Moscow Ring Road | km | 3500 RUB + 50 rub. for every kilometer |
3 | By public transport (on a business trip) | under a separate agreement | |
II. The cost of consultation on the choice of the diesel generator set model and the connection method |
|||
4 | Consultation on choosing a diesel generator set model, additional equipment and the best option placement and connection of DGS | 5000 | |
III. Development of technical documentation |
|||
5 | DGS layout, single-line electrical circuit switching on DGS at the facility, drawing up a contract, costing | to-t | 4500 |
IV. The cost of starting diesel generators in operation according to the standard connection option |
|||
6 | a) Connecting the diesel generator set complete with load transfer panel and putting it into operation by specialists Service center(the DGS is being installed on a vibration-insulating base, the power cable and auxiliary cables of the DGS up to 10m long are mounted and connected, the load switching panel is mounted and connected, and the commissioning works). | to-t | 10-15% of the retail cost of a set of equipment |
b) Connection of a diesel generator set (the same is done, but without load transfer panel ) and putting it into operation by the Service Center specialists | to-t | 8-12% of the retail cost of a set of equipment | |
V. Cost of work on launching a diesel generator into operation according to the option of commissioning |
|||
7 | a) The set of equipment includes the diesel generator itself and the load switching panel. | to-t | 4-6% (four percent) of the retail cost of equipment |
b) The set of equipment includes only DGS. | to-t | 3-4% (three percent) of the retail cost of equipment | |
Vi. Additional electrical work on connecting switching devices (devices) |
|||
8 |
Circuit breaker: - single-pole - bipolar - three-pole - RCD |
PCS. |
250 350 450 500 |
9 | Three-position rocker switch up to 100A | PCS. | 2500 |
Vii. Installation of electrical cable lines |
|||
10 | Laying of overhead cable lines up to 16 mm2 | r.m | 320 |
11 | Laying the cable line in a PVC box, PVC corrugated hose, metal hose: up to 35 sq. mm from 35 sq. mm to 50 sq. mm more than 50 sq. mm |
P.m |
120 |
12 | Laying an external cable line in the ground in a prepared trench | r.m | From 100 depending on the cable brand |
VIII. Works in electro switchboard 0.4 kV |
|||
13 | Selection and redistribution of the load (bulkhead) in the switchboard to ensure uniform loading of the phases for connection to the DGS | to-t | shield equipment cost + 10% |
IX. Installation of ventilation and exhaust systems |
|||
14 | Installation of the exhaust gas removal system of the generator set engine - exhaust pipe diameter up to 60 mm. - exhaust pipe diameter from 60mm to 100mm. - exhaust pipe diameter from 100mm to 150mm. |
P.m |
950 |
15 | Thermal insulation of pipes (metal hose) of the exhaust system | r.m | 600 |
16 | Installation of an additional muffler in the exhaust system of the engine of the generator set. | to-t | 4500 |
17 | Installation of the generator room forced ventilation system: - using inertial blinds - using electric shutters |
K-t |
6500 |
X. Connection and adjustment of voltage stabilizers |
|||
18 | installation, connection and adjustment of mains voltage stabilizers or sources uninterruptible power supply, excluding the laying of power electrical cables | to-t | 10% of the retail cost of a set of equipment |
XI. Installation of an external fuel system |
|||
19 | Connection of an additional fuel tank with a volume of 300 liters, without an auto-priming system | to-t | 8500 |
20 | Connecting an external fuel system with automatic priming of the main or intermediate fuel tanks | to-t | on request |
XII. Additional construction works: |
|||
21 | Making holes in a brick wall for a supply and exhaust ventilation system The same in concrete |
volume of production, m³ |
21000 Under a separate agreement |
22 | Making a hole in a brick wall for a gas outlet with a diameter of up to 60 mm | r.m. | 2400 |
23 | Making a hole in a brick wall for a gas outlet with a diameter of 60 mm: up to 120 mm | r.m. | 3200 |
24 | Making holes in a brick wall for cable routing up to 30 mm | r.m. | 950 |
25 | Gutting brick wall for laying electrical cables - the same in concrete |
r.m. |
300 Under a separate agreement |
XIII. The cost of work on connecting the diesel generator set: |
|||
27 | Installation of DGS up to 20kVA on a vibration-isolating base | 4800 | |
28 | Connecting cables and wires to DGS | ||
up to 16 sq. mm | to-t | 2200 | |
from 16 sq. mm to 50 sq. mm | to-t | 3300 | |
from 50 sq. mm to 120 sq. mm | to-t | 4500 | |
over 120 sq. mm | to-t | on request | |
29 | Load Transfer Panel Connection | ||
up to 63A | to-t | 8000 | |
from 63A to 125A | to-t | 11000 | |
from 125A to 250A | to-t | 14000 | |
from 250 to 400A | to-t | 22000 | |
over 400A | to-t | on request |
Calculation of the departure of a specialist
- Departure in Moscow and Moscow region:
from 4,000 rubles... (the amount is taken into account when ordering equipment). - Travel by train / plane:
Check by phone.
Professional installation of diesel generators- one of the services that can be ordered from the "KVT Generator"! We provide turnkey services, therefore, purchasing a diesel power plant from us, you have the opportunity to order comprehensive services for its installation and commissioning.
Why is it important?
Installation and commissioning of diesel generators should be dealt with by specialists working in this area. Only they are able to carry out work competently, in full compliance with the manufacturer's recommendations, compliance with current norms and standards. When carrying out work, the specialists of "Generator KBT" must take into account the following:
- the conditions in which the equipment will be operated;
- compliance with fire and technical regulations;
- the correctness of the preparation of the premises or site for the installation of the generator;
- accounting and monitoring of noise levels;
- ensuring convenience when conducting renovation works and maintenance.
Price list for installation work (not including materials) | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Service | up to 10 kW | 10-20 kW | 20-40 kW | 40-60 kW | 60-80 kW | |||||
standard | premium | standard | premium | standard | premium | standard | premium | standard | premium | |
Power cable laying by air or along a prepared route (price per 3 meters) | 2 420 | 3 390 | 3 630 | 5 090 | 5 450 | 7 630 | 8 180 | 11 450 | 12 270 | 17 180 |
Installation of ATS block | 1 940 | 2 910 | 2 910 | 4 360 | 4 360 | 6 540 | 6 540 | 9 820 | 9 820 | 14 720 |
Station grounding device | 4 360 | 5 820 | 6 540 | 9 820 | 9 820 | 14 730 | 14 730 | 22 090 | 22 090 | 33 140 |
Preparation of cable routes, site preparation, excavation | Only after the Customer has provided terms of reference | |||||||||
Laying the power cable indoors (in a box, etc. ). Price for 3 meters | 3 390 | 4 360 | 5 090 | 6 540 | 7 630 | 10 840 | 10 840 | 16 260 | 16 260 | 24 400 |
Indoor control cable routing | 1 450 | 1 940 | 2 180 | 2 910 | 2 910 | 4 360 | 4 360 | 6 540 | 6 540 | 9 820 |
Making a hole for a gas exhaust standard size(d to 80) | 4 360 | 4 850 | 5 330 | 6 300 | 6 790 | 7 270 | 7 760 | 8 240 | 8 730 | 9 210 |
Manufacturing of 2 standard openings for supply and exhaust ventilation. Wall material: brick | 7 760 | 9 210 | 9 700 | 12 120 | 12 120 | 15 150 | 15 150 | 18 940 | 18 940 | 23 680 |
Manufacturing of 2 standard openings for supply and exhaust ventilation. Wall material: concrete | 9 700 | 12 120 | 12 120 | 15 150 | 15 150 | 18 940 | 18 940 | 23 680 | 23 680 | 29 600 |
Installation of a gas exhaust system (price for 3 meters) | 2 420 | 3 630 | 3 630 | 5 450 | 5 450 | 8 180 | 8 180 | 12 270 | 12 270 | 18 410 |
Installation of supply and exhaust ventilation (inertial blinds) | 3 630 | 4 540 | 5 450 | 6 820 | 7 820 | 10 230 | 10 230 | 15 350 | 15 350 | 23 020 |
Installation of supply and exhaust ventilation (shutters with an electric drive) | 4 120 | 5 150 | 6 180 | 7 720 | 7 720 | 11 580 | 11 580 | 17 380 | 17 380 | 26 070 |
Price diesel power plant installations cannot be compared with the cost of eliminating breakdowns arising from improper installation and start-up!
The order of work
Installation of a diesel generator Is a whole range of works, which includes the following:
- carrying out general construction works (if necessary);
- conducting appropriate electrical work;
- checking the conformity of the equipment installation technical requirements;
- generator startup and testing in all operating modes;
- setting up in accordance with the results of the preliminary launch;
- starting the generator and demonstrating its capabilities to the customer;
- carrying out tests with the customer according to a previously drawn up plan;
- instruction of service personnel.
Price installation of diesel power plants calculated on an individual basis. You can find out by calling us or filling out an online application on our website. Contact us!
Installation, adjustment and launch of all types of power generating devices (DGS) is one of the key activities of LLC ENERGO +. Our specialists carry out fast and high-quality installation of diesel generators at affordable prices.
Modern generating sets are technically sophisticated equipment, from correct installation and the settings of which depend on the efficient and trouble-free operation of the backup power source. Quite often, poor-quality and unprofessional installation of power plants causes premature failure of the diesel generator and even the occurrence of emergencies.
Experienced employees of the company ENERGO + carry out the installation and commissioning of power generating equipment. The complex of installation works includes:
- checking the correct placement of the diesel generator set on the working site and its connection to the consumer's power grid;
- equipping with an exhaust system for the correct operation of the internal combustion engine;
- connection of control systems for equipment and remote devices for monitoring the operation of the unit;
- validation of all electrical connections and grounding of station equipment;
- testing equipment in all modes and taking characteristics of an operating diesel generator set.
It should be noted that the moment of putting a diesel generator into operation is quite important and it is very important that real specialists manage such a process. Since the work is carried out by qualified engineers of the company, the client will not have to doubt the correct installation of the power plant, filling of engine oil and coolant, electrolyte in batteries, fuel in the tank and starting the unit.
Highly qualified installers at the disposal of LLC "ENERGO +" will quickly and efficiently install power generating equipment of any manufacturer, as well as perform commissioning. They have undergone special training at manufacturers' factories, have the appropriate level of approval and certificates.
Price list for installation work (not including materials) | ||||||||||
Service | up to 10 kW | 10-20 kW | 20-40 kW | 40-60 kW | 60-80 kW | |||||
Station grounding device | ||||||||||
Power cable laying by air or along a prepared route (price per 3 meters) | ||||||||||
Preparation of cable routes, site preparation, earthworks |
After receiving the technical assignment from the customer |
|||||||||
Laying the power cable indoors (in a box, etc.). Price for 3 meters | ||||||||||
Indoor control cable routing | ||||||||||
Making a hole for a gas exhaust of a standard size (d up to 80) | ||||||||||
Manufacturing of 2 standard openings for supply and exhaust ventilation (brick) | ||||||||||
Manufacturing of 2 standard openings for supply and exhaust ventilation (concrete) | ||||||||||
Installation of ATS block | ||||||||||
Installation of a gas exhaust system (price for 3 meters) |