What can be cooked from squid: quick and tasty

Since 1994, Cerberus Locks Ltd. has been developing and manufacturing locking devices. The basis of the company's activities is the principle of continuous quality control at all stages of production, as well as continuous improvement of products. The company currently holds three patents for inventions, including the unique K-System lever mechanism, thanks to which the lock can be opened and closed even in the event of broken springs. In addition, all products have passed certification and comparative tests conducted by the Ministry of Internal Affairs of the Russian Federation.

Types of Cerberus castles

Cerber Door Locks are well known in St. Petersburg, Moscow and far beyond their borders. There are no padlocks or garage locks in the range, which, due to their design, cannot provide adequate protection. Burglary resistance characteristics of Cerberus mortise locks correspond to 3 and even 4 class, while most padlocks have a resistance class not higher than the second. The consumer is offered the following types of locking devices:

Overhead locks;
Mortise locks with lever mechanism;
Mortise locks with a cylinder mechanism.
Mortise locks with the ability to change the mechanism;
Mortise locks with handle and latch;

Design features of Cerberus locks

Comparative tests have shown that high consumer characteristics of Cerberus locks are provided due to the following design differences:

Sawing protection realized as a rotating hardened steel cylinder integrated into one of the bolts;
Protection against drilling of the bolt leg. In Cerberus locks, this part is made of hardened high-carbon steel, which meets the requirements of Russian and international standards;
Protection against burglary by the rolling method provides for the priority breaking of any of the bolt shank teeth, with the exclusion of damage to its rack, which leads to blocking of the lock.

As an additional measure of protection of locks from opening in Cerber products, the introduction of a separate key into the design for locking from the inside is used. Some types of locking devices provide for the introduction of a permanent internal key, with which you can close and open the door without having to worry about its safety.

In our catalog on the site there are more than 45 products of the company "Cerberus Castles". You can choose and buy them regardless of your location. We will ensure the delivery of these high-class products to anywhere in Russia by means of transport companies as soon as possible.

Overhead locks brand Cerberus has found a worthy place among locks and hardware products. In the assortment of the company you can find burglar-proof models for metal and wooden doors leverage mechanism of secrecy. They are designed to securely lock buildings, garages and apartments. Our catalog contains current models: ZNU-M, ZNU-P.

Distinctive features

The safe lock has kinetic closure of the lever and key. The bolts are made of calibrated steel. Original design prevents drilling through the jig. The padlock mechanism has a brass key blade and 65,000 secrets.

The advantages of the closure:

the strength of the brass body;
moisture resistance;
65 thousand secrets of the key mechanism;
ergonomic design;
reliability;
bolts are made of high quality calibrated steel;
ease of installation.

Without conversion, the locks can be mounted on right or left solid wood or metal doors up to 50 mm thick. They are durable, reliable and unpretentious, resistant to moisture and frost. Padlocks suitable for doors like country house either a garage or for city apartments.

Shop "zamkitut" - high quality at the best price

In our store you can buy patch locks in Moscow. In the catalog of the online store you will find a large selection of inexpensive models from a domestic manufacturer. We will select the perfect locking mechanism depending on the configuration of the door and the style of the room.

We guarantee:

current models of "Cerberus" brand padlocks;
prompt delivery;
optimal cost;
warehouse - over 500 sq.m;
competent advice from experienced specialists.

Visit retail stores and wholesalers for a selection of locks and hardware. We carry out prompt delivery to all regions of Russia. To complete the application, fill out the convenient form.

Garage co-ops, gates and locks are a very popular topic that continues to gain traction. But at the same time, garage locks are a very specific area due to difficult operating conditions. We will now talk about this: what locks can be installed on the garage, and what you should pay attention to when installing.

Garage lock properties

Many people associate the phrase "garage lock" with rack and pinion locks of different models and designs. We will not consider them here. The first reason, we considered locks of this type earlier.

The second reason, these are completely useless locks and cannot be recommended for protecting the garage from the point of view of a responsible approach.

To begin with, let's determine what properties a garage lock should have and towards the end of the material we will recommend specific models that we offer our customers based on our experience for a high-quality solution to protect a garage.

A garage, if it is located on the street, is an aggressive environment in which not all locks will work. It is a fact that it is leveler locks that, other things being equal, work more or less correctly here. We talked about what a lever lock is and on what principles it works.

In addition, the garage lock should not open from the inside at all. That is, when the gate is closed, a swindler, getting inside through a roof or a tunnel, should not be able to open the gate by simply turning the handle from the inside.

Operating with all of the above, focusing on the experience of installing and operating locks on garage doors, we offer our customers the following options for locks for garage doors.

We will start to tell from the best to the worst. It is clear that our list is our personal opinion, formed on our experience, priorities and preferences.

Still the best SAPPHIRE

In our opinion, one of the most best options that can be offered for the garage is Elbor Sapphire. The most powerful castle in which there are many defenses. Huge number of coded elements and shutter shutters as protection against tampering with intelligent methods. Huge crossbars and their decent stock in the hull, armor plate - as protection against forceful opening methods.

Elbor Sapphire is produced in both invoice and cut-in versions. More details about this castle were discussed in a separate video.

Sapphire has two drawbacks.

Mediocre, far from ideal workmanship
It is produced only on one side of the opening, it seems to be on the right, and you cannot put it with levers down on the left-side gate, do not risk it

Second in the list

Inexpensive in price, unusually impressive in its dimensions and proportions, with good performance. Works for a decade in any mud and cold. Minus: the previous generation lock with all the ensuing consequences. That is, clumsy, uncomfortable, with holes in the structure and protection.

About the castle RIF-1, no matter how surprising it was for you, we again told in detail in the video.

Principles of installing a lock in a garage.

When installing any lock on a garage, you must adhere to the following principles. We will not dwell on each point of the rules, since the main part of the plot is still about the model of locks. But let us note that these rules were formed empirically, as they say, suffered through sweat and blood.

The installation of the case must be carried out in compliance with all planes.
It is impossible to overtighten and deform the case with fasteners. Including it is impossible and reaming mounting holes and key.
When opening and closing the lock, no pressure should be exerted on the bolts when the crossbars are rubbed against the box. That is, it should stand so that the bolts have a slight backlash.
The fasteners of the lock should not be visible from the outside of the gate, no matter what superheated caps and bolts of the fastening screws you have.
On locks garage doors and wickets are strongly discouraged to install additional crossbars or up and down rods. If you want a more serious locking, it is better to put two locks on the gate and spread them up and down from the center of the gate away from each other.
Well, the latter is more related not to installation, but to operation. Modern garage locks cannot be lubricated in principle. Lubrication + street dirt + frost drastically reduce the service life and cause a lot of trouble.

Anything to add? Do not hesitate - leave questions and comments in the comments!