What can be cooked from squid: quick and tasty

Even with regular maintenance of the tiled surface, dust and dirt accumulate in the inter-tile space. As a result, the seams between the tiles darken or turn black, which threatens the development of mold, and simply spoils the appearance. What to do in such cases and what folk and professional methods can be used, we will consider in this article.

There are numerous options for how to clean the seams between tiles on the walls or on the floor, and you can use improvised means. They are the safest and most effective ones.

Baking soda

Soda is an assistant in the care of any appliances, dishes and surfaces in the house. She can do it: mold, rust marks and other problematic contaminants. Soda helps to clean the seams, but it is not used dry, but as a gruel. It is easy to make, mix a small amount of baking soda with water (about 5: 1) to form a mushy paste. Apply the resulting product with a brush, leave in this form for 20 minutes. You can rub if necessary.

Important! It is convenient to brush the seams with a toothbrush, its narrow bristles help focus energy on the desired area and clean hard-to-reach areas.

Depending on the type of contamination, the procedure will need to be repeated 3-4 times. It is especially difficult to remove traces of rust from the hardened grout. The use of baking soda also prevents the formation of fungus.

Ammonia

The ammonia removes limescale and musty odors, for cleaning you need:

1. Take 1 tbsp. l. ammonia and 2 liters of water, mix.
2. Apply with a spray.
3. Leave the problem areas thoroughly moistened for 10 minutes.
4. Rub with a damp sponge and dry with a cloth.

The ammonia is also antimicrobial and provides mold protection on tile and grout surfaces.

Vinegar, soda and citric acid

This is a convenient option for bleaching tile joints in the kitchen and bathroom. Home remedy preparation:

• 3 tbsp. l soda.
• Water - 100 ml.
• Lemon juice or citric acid - 0.5 tbsp l.
• Vinegar (9%) - 50 ml.

Mix the liquid components, then add them to the dry ones and mix. A violent reaction will occur, so the fluid should be infused gradually. The mixture is applied to dirt with a brush. After 10-15 minutes, apply another layer in the same way. Leave for another quarter of an hour, then rinse.

Wash off the dirt in the seams floor tiles it turns out to be pure vinegar. It is convenient to apply it with a spray bottle. For exposure, it will need to be left for 15 minutes, then rinse off with a sponge.

Using baking soda and vinegar, which are always found in the house, you can wash off not very old stains. The process consists of applying dry baking soda and spraying vinegar on it. After completion of the reaction, leave for 10 minutes, rinse. But this method cannot be abused, since any acid softens the grout, and the seam becomes weaker.

Peroxide

This method helps to disinfect the seam. Peroxide is non-corrosive, so grout and hands will not be damaged. Once applied to dirt, hydrogen peroxide does not need to be rinsed off, which speeds up the cleaning process.

The only drawback is that it works on fresh stains, although it perfectly removes fungus. Peroxide is not applied in its pure form; it should be diluted with water in a 1: 2 ratio. Treat contaminated areas with the resulting solution.

Whiteness and soda

It will be possible to clear the space between the tiles from mold and blackness using baking soda and, or any other chlorine-containing bleach. It is easy to prepare the product - mix the soda and whiteness until you get a mushy composition. Spread the seams with the resulting paste, it is convenient to do this with a spatula. Leave for 10 minutes, then wash off with the abrasive side of a kitchen sponge.

Whiteness with soda will get rid of blackness and mold, whiten the seams. But the product cannot be used on colored areas, as they will lose their original appearance. This chemical method can only be used with the use of personal protective equipment: gloves, masks and glasses.

Household chemicals

To clean the seams, you can use the available household cleaning products.

Washing powder

Gruel from ordinary washing powder gives a whitening effect. In this case, it is better to take an expensive powder with the appropriate action, for example, Tide, Ariel, Persil. Cleaning process:

• Pour powder into a container. It will take 3-4 tbsp. l depending on the area of ​​contamination.
• Pour some water so that you get a thick gruel.
• The resulting product must be applied to problem areas with a spatula or by hand.
• Leave on for 15 minutes, rub if necessary and rinse with water.

Oxygen bleach

It will help to restore the whiteness of the seams. Mix it with warm water in equal proportions. Apply with a sponge and leave for 1 hour. Then rinse with water. This method will get rid of stubborn dirt.

Important! You can use ordinary whiteness, but you need to be extremely careful with it, since it has a pungent, strong smell. Not suitable for colored tiles and seams.

Special means

You can use special products to clean tiles and joints. Most Popular:

• HG. It is used to remove dirt on the seams of any color, as it does not contain bleach. The product is mixed with water in the proportion specified in the instructions, applied to dirt. The effect can be seen within 10 minutes, the remnants of the product are washed off with water.
• BOZO. Removes any dirt: limescale, rust, dark spots, mold. Also removes odors and disinfects. Depending on the complexity and age of the contamination, the seams are treated with a product in the form of a concentrate or its aqueous solution.
• "Atlas Dolphin". The agent is presented in the form of an emulsion. In addition to the cleansing effect, after application it forms a thin protective film that prevents the penetration of bacteria.
• Cleaning pen. Contains dye and antiseptic components. It does not clean as much as it masks seam defects. As a temporary option, it is quite suitable.
• Mellerud. Used for cured grout in bathrooms and kitchens, floors and walls. The product is diluted or applied in a concentrated form.

Advice! You can return the seam to its original appearance without using chemicals and folk remedies. The cleaning agent with which it is impregnated will help to cope with stains, perfectly removes dirt. As it is used, it is abraded and replaced with a new one.

Steam cleaner application

The most difficult dirt in the tile joints can be cleaned with a steam cleaner. This device helps to remove any dirt and disinfect. Prolonged exposure to hot steam helps to remove deep-seated fungus. The steam generator requires a special nozzle with a thin nose. The number of treatments depends on the degree of contamination of the seam. Experts recommend at least 5 such cleanings. This will help to completely remove putrefactive fungus even from the deepest layers of grout.

Mechanical method

For dirt that cannot be removed by chemical means, you can try physical impact. This is done with a thin piece. sandpaper, effective for dirt and fungi that are not too deeply ingrained. Sandpaper carefully removes the top layer of grout along with the dirt. In this case, you need to be careful not to scratch the tile. Then it is enough to rinse the seams with water.

Radical pollution control

If the mold has penetrated deeply, it will not be possible to cope with folk or chemical methods. In this case, you will have to act radically. It is necessary to remove the old grout and re-grind the joints.

Using a scraper or a special drill nozzle, the old grout is removed, the distance between the tiles is re-cleaned, degreased and primed. After that, a new grout is applied. Sometimes it is enough to remove only the top layer of a couple of millimeters; this can be done with fine-grained sandpaper.

Important! When removing seams with a power tool, be careful not to damage the tiles.

Preventive measures

To keep dirt as little as possible in the tile joints, follow these guidelines:

• Grouting is carried out according to the instructions. Pay particular attention to preparation: degreasing and priming.
• Better to give preference to grout with an epoxy base. It prevents the formation of mildew and repels dirt.
• After cleaning, it is recommended to apply an impregnation to the tiles and joints, which closes the micropores. This will exclude further penetration of the fungus deep into the grout.
• The seams should be cleaned regularly - at least 2 times a month.
• Remove moisture from all surfaces - wipe with a dry towel.
• Ventilate the room constantly.
• Carry out wet cleaning and cleaning with vinegar and ammonia.
• Do not use granular cleaners or abrasive brushes, which will roughen the joint surface and collect dirt more quickly.

Walls and floors covered with ceramic tiles look stylish and practical to use. Any dirt can be easily washed off the tile, but it can be difficult to clean the intermediate seams.

This problem is especially common in the kitchen and bathroom. So that the painstaking work does not take the whole day, you need to choose the most suitable method and the right tool.

When laying tiles, the gaps between them are filled with a special building mixture - grout. This composition is quite strong and moisture resistant, but over time, its surface darkens. There are many reasons for this:

• The porous structure allows impurities to penetrate deeply into the structure of the material.
• The grout is destroyed by fungi and bacteria that appear in the joints.
• Tiled flooring is often used in damp and dirty rooms.

Also, tiled rooms are often highly trafficable, which leads to increased pollution.

The better to clean the seams of the tile

Both the ceramic surfaces and the quality grout are resistant to cleaning agents. Therefore, when processing them, you can safely use all the variety of modern and traditional methods.

Chemicals

In the case of stubborn dirt, especially if it is old fat or lime, it is wise to use strong commercial products.

Pemolux

Universal cleaning powder Pemolux successfully copes with darkened seams. The spaces between the tiles are moistened with water and the powder is rubbed into them with a brush.

Pemolux is a relatively mild product designed for light soiling. For it to work better, the powder must be left on the tile for 10 minutes and then washed off with water.

BOZO

BOZO thick concentrate is suitable not only for cleaning joints and tiles themselves. At the same time, they can wash plumbing, remove rust, remove limescale. It is a powerful product and is diluted 1: 4 for routine cleaning. If the dirt is heavily eaten or the seams are affected by fungus, take an undiluted concentrate.

Ultra stripper

Detergent for deep cleaning Ultra Stripper is designed to remove dirt from marble, glass, granite. With its help, you can get rid of traces of grease and soot. Wipe the surface with a soft cloth dipped in a diluted 1: 5 cleaner. Then the dirt is washed off with water and the tiles are dried. For particularly stubborn dirt, the concentration of the solution can be increased.

Home remedies

There is not always a ready-made solution at hand, and chemical preparations are not useful for health. If cleaning is carried out regularly, then it will be possible to do with folk methods.

Sandpaper

It is easy to remove the top layer of grout together with dirt from the tile joints. This is done with fine-grained sandpaper. You will have to work very carefully so as not to scratch the smooth surface of the tile. This is a fast and environmentally friendly method. Its disadvantage is that each time the seams get a little deeper, and new dirt appears faster in them.

Soda

Soda is usually mixed with other substances that enhance its effect. For example, you can prepare the following mixture:

• 1/2 cup baking soda
• 1/3 cup lemon juice
• 1/4 cup vinegar
• 7 glasses of water.

The liquid will foam a lot, so take a larger container and wear gloves. The resulting solution is applied to the seams and after 15 minutes rinsed clean.

For white grout, a bleach and baking soda mixture is very effective. But if the putty between the tiles is colored, the bleach can eat up the paint.

Vinegar

Acetic acid is effective against grease and lime stains. Table vinegar is mixed with the same amount of water. The solution is sprayed onto a wall or floor surface or applied with a rag. Using a stiff brush, the seams are cleaned and the dirt is washed off with clean water.

Lemon acid

A thick gruel is prepared from citric acid and a small amount of water, with which the seams are rubbed. Alternatively, you can simply dip a damp sponge into the powder and rub the spaces between the tiles with it. Before rinsing the composition, it is recommended to wait a few minutes for the citric acid to work stronger.

Can I use a steam cleaner

A modern and efficient way to clean joints is to use a steam cleaner. The hot steam easily destroys not only dirt deposits, but also mold and mildew. Besides, heat and pressure has a disinfecting effect.

A jet of hot steam should be directed to the spaces between the tiles. After such treatment, the dirt loses from the surface, and it can be easily wiped off with a damp cloth.

This is a very effective and environmentally friendly option, the only drawback of which is the cost of the steam cleaner.

Which mechanical cleaning method should I choose?

If the use of solvents for some reason is impossible, you can remove the top layer of grout mechanically.

Putty knife

Before starting to process the joints with a spatula, it is recommended to soften the grout:

• strong citric acid solution;
• vinegar;
• means for plumbing.

The seams are moistened with a solution and left for several hours. After that, the top layer of grout will lend itself better to the spatula. With this tool, you can easily remove the darkened material.

Screwdriver or knife

Use a flat screwdriver or knife to gently scrape off the dirt, taking care not to damage the grout too deeply. The sharp tip will allow you to clean exactly where you need it. Be careful not to scratch the tiles themselves.

If surface cleaning is not enough, you can remove all grout from the joint with a screwdriver and then replace it with a new one.

Chisel

The most convenient device is a chisel. Wood carvers use a tool with a narrow semicircular tip. You can make such a device yourself by sawing a thin metal tube and grinding off one edge diagonally. The curved edge is especially suitable for cleaning narrow grooves between tiles.

The video shows how you can clean the joints between tiles using a special knife.

How to clean floor seams

The floor is especially hard hit. This includes household dust, sand from shoes, and spilled juice. It is useful to know the type of contamination in order to quickly remove it.

In the bathroom

The bathroom belongs to rooms with a high moisture content in the air. In addition, pipes can leak there. As a result, the following problems arise:

• limescale - appears in places where water often gets into;
• rust - occurs due to leaking pipes;
• fungus - quickly spreads in damp rooms.

If fungus is present, care must be taken to ensure that the cleaning agent is designed to kill it. For example, it can be preparations containing chlorine.

In the toilet

The toilet also has plumbing fixtures that can cause excess moisture or rust on the floor. In addition, this room often has small size, and high-quality ventilation is especially important for him. If there is no movement and air change, mold easily appears in the tile joints.

On the kitchen

The peculiarity of problems with the seams of the kitchen floor is that dirt forms when cooking. This could include splashes of grease, dropped food, or dried-on residues of laundry and detergent. For cleaning will be useful chemical compositions, aimed at combating just such pollution. Lime deposits and rust on the kitchen floor are also possible.

How to clean up various contaminants?

Depending on how the grout got dirty in the joints, you need to apply different ways cleaning.

Fungus

Fungal damage appears as dark spots, which, after routine cleaning, soon reappear in the same place.

An effective remedy in this case are chlorine-containing products, for example, Domestos.

If the fungus has penetrated too deeply, then there is no choice but to replace the grout.

From mold

Mold is a type of fungus and the same remedies work for it. If there is not a lot of mold, you can paint over the darkened seams with a special felt-tip pen. It contains disinfectants and waterproof paint. Please note that you cannot use soap in this case, it contributes to the spread of mold.

From nicotine

In rooms where people smoke often and a lot, initially white seams become yellowish, or even brown tint... This problem can be easily solved using organic solvents: white spirit, gasoline, acetone. From home remedies, a mixture of soda, lemon juice and vinegar whitens seams well.

Removing rust

Where are laid water pipes, there is a great risk that the joints between the tiles will be stained with rust. To combat this, you can use common household chemicals, for example, Sanox. The packaging must indicate that the product is effective against rust. You can also try using a melamine sponge.

Old pollution

Some seams are not exposed to any particular contamination, but over time they turn yellow and crack with age. It is usually not possible to clean the surface of such a seam mechanically or with a solvent. There remains only the option of replacing the grout.

An alternative is to clean the seams and paint them over with paint. True, the results of such an update are unlikely to last more than a year.

How to whiten the seams

If the grout does not contain color pigments, you can return the white color to the joints using a mixture of baking soda and bleach. The powder is diluted with water and applied with a brush to the wall or floor. After 15 minutes, the seams can be cleaned and dirt removed from the surface with a damp cloth. Lemon juice also works as a natural bleach.

How to clean seams quickly

To quickly clean the seams between tiles at home, it is best to know a reliable all-purpose tool. Then, with a simple movement of a damp sponge, you can get rid of grease, dust, mold, rust and lime.

Given the large assortment of chemicals in stores, choosing is not an easy task.

The mechanical method takes longer. It is not so easy to walk the tool along all the narrow stripes between the tiles. But if it seems to you the most convenient, why not?

When to change grout

Radical methods, namely replacing the grout between the tiles, have to be used in the following cases:

• dirt is not washed off;
• unable to remove the fungus;
• grout crumbles.

This is a time-consuming process, so they resort to it only when necessary.

First, remove the old grout with a screwdriver, lightly tapping on its handle with a hammer. Then the resulting depressions are filled with a new mass. Any surplus on the tiles is immediately removed with a damp cloth. It is recommended to fill the seams of floor tiles with an epoxy-based compound. Dirt sticks to this grout less, and mold does not attack it. Replacing grout is a difficult and painstaking, but very effective way.

Prevention and protection of seams

Cleaning of the joints can be avoided by taking good care of the tiles and not waiting for dirt to build up. The most obvious way is to often wipe the tiles with a brush and warm water. This will keep the grout strips color and clean. From time to time, you can arrange a general cleaning, thoroughly washing problem areas.

When laying new tiles, fresh joints are treated with a special protective liquid. It not only protects against dirt, but also guarantees the absence of fungus. The composition must be applied very carefully, since it should not fall on the surface of the tile.

However, the work is well worth the effort. After all, the seams covered with a protective substance will remain clean for a long time.

Cleaning of tile joints is quite within the power of any attentive and neat person. It does not require any special skills or tools. And with the use of modern cleaning agents, this process takes much less effort and time. If you still don't want to do this, do regular cleaning, then you won't need to clean the seams for a long time.

Dirt in the inter-tile space makes every housewife think about how to clean the seams between the tiles in the bathroom. This is done using a variety of compositions. The editors of the site have prepared detailed instructions on how to clean hard-to-reach places correctly.

Read in the article

Why wash tile seams: every housewife should know this

Cleaning the seams between is dictated not only by aesthetic considerations. Timely removal of the resulting contamination will protect households from possible problems with health. In the inter-tile space, optimal conditions are created for the growth of bacteria and the appearance black mold... We suggest further learning how to clean the grout between the tiles in order to achieve a high-quality result.

Cleaning of tile joints with household chemicals

When starting to clean tile joints, you should decide on a suitable composition. Manufacturers offer a fairly large assortment, among which it can be difficult to find a suitable option.

Among the popular means for cleaning tile seams, it is worth highlighting:

• "BOZO"... The composition is effective against limescale and rust. Disinfects the substrate and removes odors. On the packaging you can read how to clean the seams between the tiles on the floor in order to achieve the best effect;
• "HG"... Does not contain bleach, therefore it is suitable for cleaning surfaces of all colors;

HG product review

Read more on Otzovik: https://otzovik.com/review_1903272.html

• IVIclean "proTECt"... The spray allows you to effectively deal with various contaminants;
• ECO MIST... Contains natural ingredients. Copes with the task effectively.

Feedback on ECO MIST

More details on Otzovik: https://otzovik.com/review_2722781.html

To clean the tile joints as late as possible, pay attention to the "Atlas Dolphin". The tool allows you to protect the surface due to the formation of a dense impermeable film. It is applied immediately after cleaning the inter-tile space.

Review of the tool "Atlas Dolphin"

More details on Otzovik: https://otzovik.com/review_5256730.html

How to wash the seams between the tiles in the bathroom: we resort to folk recipes

The use of household chemicals is fraught with certain difficulties: a suitable drug may not be available on sale, or its cost may be excessive for a particular family. In such a situation, when deciding how to wash the seams between the tiles in the bathroom, you should use the means at hand. Often, folk recipes are more effective than purchased drugs. We invite you to get to know them.

Cleaning the joints between tiles with baking soda

If we talk about how to clean the seams between, you should immediately pay attention to the soda. This substance has good disinfectant properties and will help to cope with various contaminants at home. It is enough to add a little water and the resulting paste to clean the dirt.

Cleaning of tile joints with ammonia

If you want to not only clean the tile joints, but also add shine to the tiles, you should pay attention to ammonia. This substance will quickly cope with the task. Now about how to bleach the seams between the tiles in the bathroom:

• prepare the solution by mixing with 2 liters of water st. l. ammonia;
• spray on the surface to be cleaned using a spray bottle;
• wait 20 minutes;
• we wipe the walls with a damp cloth.

How to clean the seams between tiles in the bathroom with bleach

If you don't have the necessary household chemicals at hand, consider how to wash the seams between the tiles in the bathroom with oxygen bleach. It should be diluted with water in equal proportions, and then spread over the entire surface with a sponge. Exposure time - 1.5 hours. Remains of dirt can be removed with a hard sponge.

What combination means to clean the seams between the tiles in the bathroom

If the listed options turned out to be ineffective, when deciding how to clean the seams between the tiles in the bathroom, you should pay attention to the combined compositions. A paste consisting of a powder containing bleach and soda is quite effective. Such a composition cleans the surface well and disinfects. Apply to the contaminated area, wait for it to dry completely, and then wash off.

Attention! A similar composition should not be used to disinfect colored surfaces.

A solution of vinegar, baking soda, and citric acid will also help remove mold.

Steam cleaning of tile joints

If the use of aggressive substances is impossible, and the question of how to clean the tile joints is relevant. It is worth paying attention to. Such a device is not only capable of creating a jet of steam and releasing it under a sufficiently high pressure.

As a result, the dirt is first softened and then knocked out of the inter-tile space. A sufficiently high temperature (150-170 ° C) allows you to cope with pathogenic bacteria and fungus. For allergy sufferers, the question of how to clean the seams between the tiles in the bathroom is not worth it. For them, a steam generator is the only effective tool that they can use in their apartment.

Attention! When using steam, all safety precautions must be followed.

Mechanical cleaning of tile seams

If the dirt did not have time to penetrate deep enough, you can resort to cleaning the seams of the tile by mechanical action. This will require paper containing abrasives. With its help, it will be necessary to process all the joints. After processing, the entire surface is simply rinsed with water. Instead of sandpaper, a hard sponge is sometimes used.

Attention! When deciding to resort to mechanical cleaning, you should work very carefully so as not to damage the lining.

How to clean the seams between tiles in the bathroom with special dyes

If you cannot completely remove the dirt, you can simply paint over it. For this, a composition with suitable characteristics is selected and the desired color... The most popular are:

• Edding 8200, has the shape of a marker with a tip 2-4 mm thick. Allows you to paint over a white base;

• Pufas Frische Fuge Komplettset... Coloring composition with low durability and cost. Available in white, but can be tinted;
• Fuga fresca... Wide range of colors available.

How to clean the joints between tiles? How to whiten the seams between tiles? Every second housewife asks herself these questions, because in almost every apartment there is a room where tiles are laid on the floor. Accordingly, everyone sooner or later thinks about cleaning the seams between tiles, since they tend to darken over time, this is especially visible on white grout. This can be limescale, ingrained dust and dirt, mold. How to whiten seams between tiles that have darkened over time, what means can help with this? Let's figure out how you can bleach the seams between the tiles.

Water and sponge

Most of the tiles are laid on the floor in the bathroom. In this room, there is naturally a frequent formation of steam, which binds the dust that has settled on the floor surface, and thereby "sticks" it even more to the tiles and seams. My floor, we, as a rule, pay attention directly to the tiles, from the smooth surface of which, dust can be easily removed with a wet rag, sponge, etc., while driving the dust into the tile joints. Therefore, if you notice a darkening of the grout, before applying aggressive products to its surface, try simply rubbing with a damp brush first. If the dirt has not yet eaten into the grout, the dust simply rolls off, and you can easily remove it with a damp sponge. In the case when you removed the dust, and the result did not suit you, the seams are still not white enough, as you would like, proceed to whitening them.

Folk remedies

How to wash the seams between tiles with improvised means? In order to independently prepare a solution that will produce a whitening effect, you will need water, soda, vinegar, lemon juice, protective gloves, and a brush. To clean the joints between the tiles, wear rubber gloves and gently mix 100 g baking soda, 1/3 cup lemon juice, 1/4 cup vinegar 9% and 1.5 liters of warm water. The mixture of baking soda and acetic acid will react violently and produce gas, so be careful. To mix the components of the solution, take a large container so that the foam does not start pouring over the edges of the container. With a convenient brush, while the reaction is taking place, apply the solution, you will see the result immediately, but for the best result, leave it for 10-15 minutes, then rub and rinse with water.

You can whiten the seams between the tiles with another simpler one. folk way: citric acid washing solution. Proportion: 1 sachet of acid in 1 glass of water. Apply for 15 minutes, then rinse seams with water.

Melamine sponge

A sponge made of 100% melamine will help clean the tile joints. This sponge has the property of no additional chemicals remove dirt from the surface. She white, has no foreign smell, made by special technology, thanks to which, while remaining soft, it acquires almost the hardness of glass. The ingress of melamine into the human body is not desirable, therefore, you should not wash dishes and other surfaces intended for food with a sponge (refrigerator shelves, countertops, etc.), and it is ideal for cleaning tile joints on the floor.

When using a sponge, it is erased like an eraser, so it is better to start cleaning with the corner of the sponge, and not with the entire surface, so its service life will be much longer. Before use, the sponge must be wetted and gently squeezed out. Practice has shown that a melamine sponge cannot cope with deeply moldy seams, but simply a dirty tile seam will wash well.

Chemical detergents

Of course, you can find a special joint cleaner in the store, but every home has a variety of different cleaning and detergents that will do the job just as well. Experiments have shown that they are almost equally good at cleaning inter-tile gaps, cleaning the joint between the bathroom and the tile, and limescale, and cleaning agents for toilets, and various universal means for cleaning the bathroom and kitchen, for the destruction of fungus - chlorine-containing agents. Therefore, before you go in search special solution, it is worth trying to clean the existing seams.

Always use gloves when handling chemicals. Provide good ventilation. In an inconspicuous place, try applying a cleaning solution to the tile to test its resistance to aggressive environments; if the tile is glossy, it may lose its shine due to a long exposure to the cleaning agent. You should also check the reaction of the colored grout, as some of the products can whiten the pigment.

Steam cleaner

Another option for cleaning the joints between tiles is steam. Many manufacturers and sellers of steam cleaners recommend them as a way to clean the joints between tiles. Hot steam helps fight mold and mildew. When buying a steam cleaner, it is better to focus on customer reviews, because not all models of this type of equipment can cope with this task.

Replacing grout

There are especially neglected cases when none of the means will save and there is no point in washing the seams. This is especially true of surfaces affected by fungus, mold, which chlorine-containing solutions cannot even cope with. In this case, a complete replacement of the grout is required.

If you decide to do this without the help of specialists, then be patient, because you will have to completely get rid of the old grout, that is, pick it out. To do this, you will need some kind of scraper, from the available tools - it can be a screwdriver. After you have removed all the grout, apply a primer, wait until it is completely dry and apply fresh grout. Remove the excess until it is dry, then it will be problematic to do.

Clean tile joints more often in a gentle way, then you will not have to resort to the use of aggressive solutions. It may not be worth using white grout on the floor, then you will minimize your efforts and costs for cleaning the tile joints.

izplitki.com

How to clean the seams between floor tiles

Method 3: Using oxygen bleach Using chlorine bleach and baking soda Using a steam cleaner

Few people enjoy cleaning the joints between floor tiles, especially when they are heavily soiled with stains that are difficult to remove. By following the tips below, the seams between the tiles in your apartment will look just as clean and beautiful as soon as they are renovated.

Steps

Method 1 of 3: Using oxygen bleach

Oxygen bleach is a powerful cleaning agent that consists of hydrogen peroxide and baking soda. The remedy takes effect when it is mixed with warm water. The oxygen ions in the bleach break down the dirt molecules, breaking them down into small particles that can be removed very easily.

Method 2 of 3: Using chlorine bleach and baking soda

If oxygen bleach is ineffective, use chlorine bleach. However, this solution should only be used for white joints, as the bleach will ruin the colored grout.

Method 3 of 3: Using a steam cleaner

The steam cleaner is an effective device when neither oxygen nor chlorine bleach can cope with cleaning seams.

• Try to remove stains while they are fresh for the best results.
• Apply sealant to clean floor. The sealant will help prevent future contamination.
• To keep your floor looking clean, add oxygen bleach to the water when you wash the floor. Leave the solution on for 30 minutes. Then rinse the floor with clean water.
• Choose nylon or brass brushes for your steam cleaner, depending on the strength of your tile.

Warnings

• Only work with chlorine bleach in a well-ventilated area.
• Cracked tiles should not be cleaned with a steam cleaner.
• Always use rubber gloves when handling oxygen or chlorine bleach. Also, wear old clothing as the bleach may splash onto the fabric.
• Always read the manufacturer's instructions when using a steam cleaner or any other appliance.

What do you need

• Bucket
• Oxygen bleach
• Pure water
• Nylon bristle brush
• Mop
• Baking soda
• Chlorine bleach
• Stick for stirring paint
• Toothbrush
• Steam cleaner

ves-mir.3dn.ru

How to clean the seams between floor tiles

Tile is an excellent material for protecting surfaces from dirt. In addition, she is not demanding in care. However, sooner or later the question arises of how to clean the seams between the tiles, since ordinary wet cleaning does not cope, and darkening at the joints makes the floor sloppy.

Why do the seams darken quickly?

To clean the joints between the tiles on the floor, you need to know why they get dirty so quickly. It all depends on the room in which the tiles were used on the floor. Usually in the kitchen, in pantries and utility rooms, it quickly loses its attractive appearance, due to constant contact with dust, dirt and other substances. And if the tile itself is washed quickly, then in order to clean the joints you need to spend a lot of time.

You need to choose a method depending on the type of pollution.

Often the seams between the tiles darken due to getting there:

• Leftover food.
• Dust.
• Contaminated liquid.
• Detergent.
• Construction dust.
• Street dirt

The grout, with which the seams are processed, quickly becomes not aesthetic, since various particles adhere well to its rough surface. Therefore, even during renovation works try to choose a practical dark shade, especially in the kitchen or if the room will be walk-through.

Materials for cleaning seams

It is impossible to clean the joints between the tiles on the floor without the use of additional tools and detergents. Therefore, you should take care of this in advance and prepare everything.

You should have at hand:

• Stiff brush (old used toothbrush will do).
• Cleaner with aggressive abrasive ingredients.
• Rubber gloves.
• Warm water or at least room temperature.
• Sponge or rag.
• Soda, vinegar, lemon, and peroxide.
• Putty knife.

When everything is ready, you can start cleaning the joints. There are several proven ways to eliminate dirt, it is enough to choose the most optimal and not time-consuming.

Proven techniques for tackling dirty joints on floor tiles

Many, wondering how to clean the seams between the tiles on the floor, rush to the store for expensive detergents. However, if there are children in the house, or people prone to manifestations of an allergic reaction, then you should not use chemical agents to deal with dirt at the joints. In this case, it is better to resort to folk recipes.

You will need to take 3 parts of baking soda for 1 part of water to end up with a thick paste. This composition can easily bleach almost any seam. During the process, hands should be protected using rubber gloves.

You will need to apply a thin layer of baking soda to the seams. Spray vinegar over it. As soon as the chemical reaction has begun, begin to remove the foam, along with the contamination, with a rag. This method, unlike the previous one, cannot be called universal, since it is not safe for marble tiles, and can spoil the lime grout.

Dissolve two cups of any whiteness in a container with water. Apply to seams, immediately after preparation and wait a little. However, you should be careful with colored joints, this method will lighten them and the shade will most likely be damaged. You can use a brush to work the mortar into the joint. Particular attention is paid to corners where dirt collects.

Another great technique allows you to get rid of even very stubborn dirt. It is enough to take a glass of baking soda and dilute it in one quarter of a 3% peroxide solution. Can be added to make the detergent more effective. The resulting mixture is rubbed into the seams, and using a brush, remove grease and dirt at the joints of the tiles. You should be careful, as the composition will bleach the seams, therefore it is not recommended to use it for colored tiles.

There is also a mechanical way to quickly cope with the contamination of the joints on the tiles, a steam cleaner will help, if there is one at home. It is enough to let him reach the desired temperature and carry out the usual cleaning. You should use a special nozzle in your work, which will allow you to completely direct the jet of steam to the dirty seam. If there is no such device, then you can remove dirt from the seams with a spatula or scraper, but this technique will take much longer.

What to do if a fungus appears

If between the tiles not only darkening from dirt and dust appeared, but mold and fungal spores began to grow, then, most likely, the usual detergent will not cope with the problem. You can, of course, try to remove it using the methods described above, but if the problem returns, you will need to resort to more radical methods.

• You will need to take a scraper or spatula and remove the affected areas.
• Walk along the joints with anti-fungal impregnation.
• After the solution has dried, you can start grouting.

Such an update of the joints will solve the problem and prevent the spread of the fungus. A complete renovation of the joints is recommended from time to time, since the material is still gradually deteriorating and loses its attractive appearance. Poor grouting is also the cause of the destruction of the cladding, the accumulation of moisture under the tiles, and the development of mold.

How to clean tiles after renovation work

Often times, the problem with cleaning tiles becomes immediately after they have been laid. Particles of grout remain on the tile, it is poorly washed and construction dust, paint, primer. It will not be possible to cope here with soapy water alone. In this case, you will need to use:

• Solvent.
• Kerosene.
• Ammonia.

They cannot be used undiluted, only as a component in a solution. They are able to soften and wash off almost any contamination. However, before applying such a solution, you need to be sure that the tile can easily withstand such an impact. Some inexpensive tiles, after such cleaning, irrevocably lose their original attractive appearance. You should use a blade or a scraper in your work carefully, trying not to hook the decorative component of the tile.

Video instruction

How and how to clean the seams between the tiles in the bathroom?

Tiled bathroom finishes will last a long time. But if after each water procedure the surfaces are not wiped, then over time the seams between the tiles will lose their original appearance and become dirty. Lime deposits, dust, moisture, and sometimes mold and mildew settle on them. How to clean the joints between floor and wall tiles? You will find the answer to this question in our article.

Reasons for contamination of seams

High humidity in the bathroom and the use of household chemicals for bathing are the main causes of seam contamination. This process cannot be completely prevented, but you can cope with its consequences.

The joints between the tiles on the floor and walls can become dirty due to improper use and installation techniques during repairs:

1. Surface care is performed out of time.
2. There is no heating in the bathroom.
3. There is no ventilation in a humid room.
4. The seams were not free of glue.
5. Grout without protective coating.
6. During the renovation, the base was not coated with a mildew and mildew resistant primer.

Dirty seams can ruin the appearance of even the most expensive tiles. If dirt is not dealt with in time, then mold or fungus can start in the gaps. It is much more difficult to cope with them.

How to clean the seams between the tiles in the bathroom - folk ways

Thrifty housewives can use improvised and safe means for health. Their choice depends on the degree of contamination of the tile gaps and the absence or presence of fungus.

You can restore the appearance of the tile and clean it of limescale with the help of ammonia. To do this, prepare a solution:

After such treatment, ceramic tiles will shine like new. In addition, ammonia has antimicrobial properties and is able to protect the material from mold for some time.

The easiest method is to use baking soda, which is almost always found in every home. You don't need to do anything complicated with it. It is enough just to dilute to the state of a paste with water, apply to dirty seams and clean them with a toothbrush.

Tile gaps on the bathroom floor are simply sprinkled with soda, which is moistened with a spray bottle. After that, an old toothbrush is also used. Soda from the cleaned joints is washed off 15 minutes after processing. it antiseptic can be used to prevent fungus in the bathroom.

Vinegar, soda and lemon juice

Not only dirt, but also fungus, you can clean the gaps between the tiles with a mixture of soda, vinegar and lemon juice. The tool is prepared from three tablespoons of soda, to which a solution is added, consisting of the following components:

• water - ½ glass;
• lemon juice - ½ tbsp. l;
• table vinegar 9% ¼ cup.

The solution must be poured into the soda gradually, since there will be a strong reaction. In terms of effectiveness, the resulting mixture can be compared with the best industrial cleaning agents.

The composition is applied to the seams with a brush. After 10 minutes, when the mixture is dry, you will need to apply a new layer of the composition. After 15 minutes, the walls and floors are thoroughly rinsed with water. You can wash dirty gaps with vinegar alone, which is applied to problem areas with a spray bottle. After 10 minutes, the product is washed off with a sponge.

Soda with whiteness

Adding whiteness or liquid chlorine bleach to baking soda can create a blend that will remove dirt, mildew, and tile gaps in bathrooms and kitchens. If the seams on the walls and floor are colored, then this tool will not work.

Whiteness or bleach should be added to the baking soda in such an amount that a pasty mixture is obtained. It is applied to ceramics with a spatula and kept until completely dry. The product is washed off from the surface with the hard side of a dish sponge or a brush.

How to clean the seams between floor and wall tiles - mechanical methods

It is possible to cope with the contamination of the gaps without solutions, using only mechanical methods for this:

1. If your home has a steam cleaner, you can use hot steam, which under high pressure will soften and remove any dirt. At the same time, the material is processed with high temperatures, which will help get rid of mold and mildew. After using the steam cleaner, you only need to rinse off the plaque with a rag. This is an environmentally friendly way of cleaning, during which you do not have to breathe harmful substances. You just have to be careful with hot steam.
2. You can use a chisel used by wood carvers to remove dirt between tiles. It should have a very small rounding diameter and a semicircular surface. If you can't find a chisel, then it can be made from metal pipe... You just need to cut it lengthwise and sharpen the edges.
3. Newly formed plaque can be wiped off with an abrasive sponge. It is not recommended to lather it, since the soapy environment does not possess disinfecting properties, but it can aggravate the situation. Fresh dirt under the influence of abrasive will be easily peeled off.
4. If the plaque on the seams between the plates is superficial, then you can walk over it with bent sandpaper. It should be used carefully, as it can scratch the ceramics. The grout sanded with sandpaper is washed with warm water. After removing the top dirty layer, the seams will be smooth and neat.

See also: What to do if a mercury thermometer breaks in an apartment

How to wash the seams between tiles - chemicals

When choosing a tool for cleaning tile gaps in the bathroom, you should pay attention to the composition. Bleach preparations are not suitable for colored seams. Using them can change the color, making it uneven and faded.

The most popular and effective remedies are:

See also: Cleaning your fish tank at home

Using the described methods, recipes and products, you can return the tiles and joints to a clean and attractive surface, which was immediately after the repair. But in order not to waste time cleaning old dirt and fighting mold and mildew, you should keep the walls and floor clean.

Attention, only TODAY!

Cleaning of tile joints: how and with what to clean?

Ceramic tile does not require specific maintenance during operation, but the seams between the tiles quickly become dirty and difficult to clean. This problem can occur in a bathroom or kitchen.

Important! Before cleaning, you need to wipe the surface of the tile with a damp cloth without the use of chemicals.

Cleaning of tile joints can be carried out using special chemicals. Popular methods of cleaning dirt at the junction of tiles are actively used. For efficiency, several methods are used simultaneously, sequentially.

The most popular and effective are:

Features of cleaning between tiles and bathroom

The bathroom is a specific room where high humidity, tiles constantly interact with water. The junction of the tile and the bathroom is very problematic, since there is a constant interaction with water.

Before work, you should assess the degree of contamination of the seams, namely the presence of fungus or mold. They are the reason for the need for a deep impact on the affected areas.

You can clean the joints between the tiles and the bathroom in the following way:

• With a light degree of contamination, the seams can be treated with the above products. Due to the acidic environment, dirt quickly falls off the tile surface.
• Old stains can only be removed with products that contain chlorine. A steam cleaner is effective, which removes old and deep dirt spots, but not ingrained fungus, mold.
• It is possible to clean the seam from mold or mildew only with the help of mechanical action. Remove the affected grout with a screwdriver. Places of removal of the grout are treated with vinegar. Then it is washed with warm water. When the moisture dries, a fresh grout is applied to the surface.

The last method is the most effective, but long-term. If necessary, it is also used in the kitchen. So that the fungus and mold do not bother for a long time, you can treat the grout with an anti-fungal primer applied with a thin brush.

Cleaning floor tiles

It is difficult to clean the seams between the tiles on the floor. There are many reasons for pollution and each of them requires a special approach. Depending on the degree of contamination, different cleaning methods are used: superficial, mechanical, cosmetic.

Note! The consequences of the repair can be removed using aggressive methods of exposure: solvents, kerosene, gasoline. Using a blade, you can get rid of the glue.

Features of surface treatment:

1. Simple stains can be easily removed with baking soda and an old toothbrush. If the effect is not justified, then you can additionally use vinegar or ammonia. For high-quality cleaning, the products are kept on the surface for several minutes, and then they are cleaned with a toothbrush.

   It is impossible to act with metal brushes and brushes on the surface of tiles, tiles. Thus, the protective layer of the ceramic product can be damaged.

2. When removing mold and mildew, only mechanical action is used. The affected areas are removed, and a new grout is applied in their place.

   The grout itself is coated with an anti-fungal primer. Removal can be complete and partial. In the process of work, it is advisable to use an antifungal agent at each stage.

3. For the purpose of restoration, mechanical action is also carried out, when there was a partial or complete washout, knocking out of the grouting material between the tiles. If the case is not running, then you can use available funds... Periodically, you should whiten the tile surface and the seams between them. Hydrogen peroxide is applied to the grout with a cotton swab or brush, which should be kept for several minutes.

   You can achieve white seams with fat deposits using the following mixture: dishwashing detergent, hydrogen peroxide and baking soda. You should get a soft gruel, which is applied to the joints and aged for several hours. Then the product is removed with warm water.

The floor covering is undergoing the most active impact. If we carry out constant work in the direction of maintaining the cleanliness and integrity of the grout, then each cleaning will proceed much faster and easier. It is important to study the composition of auxiliary chemicals.

The grout gives the ceramic a complete finish. Contrasting, white or matching the tiles, it makes the surface neat and protects adhesive solution from moisture. But over time, this capricious material tends to darken, fade and become covered with ugly spots. TilePol magazine will tell you how to clean the joints between tiles in the bathroom, kitchen or hallway and prevent their re-contamination.

photo from the site http://postirke.ru

Targeted control: types of pollution

Tile joints are the weakest point in the cladding. The ceramics washes well, but the grout is less resistant to both dirt and wiping. Therefore, experienced tilers prefer to use large format tiles, which reduce the number of joints. Nevertheless, it will not be possible to do without seams at all, which means that the need to clean the seams between the tiles will surely arise sooner or later. The nature of pollution and methods of dealing with them differ depending on the premises:

• In the kitchen, problems are caused by greasy stains and splashes on the surface during cooking. Therefore, in order to clean the seams between the tiles in the kitchen, you will have to take funds with surfactants that destroy the structure of the fatty film.
• Bathrooms, baths, pool rooms and other places with high humidity are susceptible to the development of mold. Colonies of these microorganisms penetrate into the deep layers of the coating and are resistant to common cleaning agents. To effectively clean the seams on the tiles in the bathroom, you will have to use deep penetrating substances with antifungal effect.
• In the hallway, corridor and other rooms with high traffic, pollution is represented by dust, dirt and sand particles brought from the street. Conventional detergents combined with physical effort work well with them.

Regardless of the nature of the problem, it will be easier to fix it at the initial manifestations. Over time, surface contamination not only becomes more pronounced, but also penetrates deeper. Regular cleaning gives better results than general cleaning a couple of times a year.

How to clean tiles between seams with folk remedies

Improvised means do a good job with pollution, even of a fungal nature, since they change the pH of the environment, destroying the cell membrane of microorganisms. By using chemical reactions wisely, you can push dirt particles to the surface, after which they can be easily removed. It is easiest to clean the seams on the tiles on the floor, since it is easier to apply solutions on horizontal surfaces and let them work. On the walls you will have to try, but nothing is possible.

Baking soda

photo from the site http://gidpoplitke.ru

For an alkaline medium to work effectively, it is necessary to create conditions for its deep penetration. To do this, you need regular baking soda, an old toothbrush, and water.

• Wet the brush cold water, dip it in baking soda and treat the stains, being careful to keep as much of the powder on the surface as possible.
• If you need to clean the seams on the tiles on the floor, simply cover them with powder and moisten them with water.
• Leave the lye to work for 10 minutes, then brush again thoroughly.
• From a spray bottle, spray a strong citric acid solution (2 tablespoons per 100 ml of water) or vinegar onto the baking soda.
• The chemical reaction will be accompanied by the release of bubbles of carbon dioxide, which pushes the dirt to the surface. When the hissing stops, spray the surface with acid again.

After that, it remains to rinse the tiles with a sponge and plenty of water. Such events help to clean the joints on the tiles from fungus and ordinary dirt, so they should be carried out in the bathroom or for flooring.

Hydrogen peroxide

photo from the site http://motors.az

Handles dirt well thanks to chemical reaction with the release of oxygen, which mechanically removes all dirt, even deeply ingrained.

• Buy a 30% hydrogen peroxide solution from your pharmacy. Keep in mind that the product is quite corrosive and will cause burns if it comes into contact with the skin, so protect your hands with gloves when handling.
• To clean the joints between the tiles on the floor, simply pour the liquid on them, and for the walls, use a spray bottle by spraying it on vertical surfaces.
• Leave for 10 minutes for the reaction to take place, then wipe the seams with a damp cloth or sponge. Repeat the manipulations if necessary.

If the cause of the stains is a fungus, the peroxide will only mechanically remove the visible part, but the spores of the microorganism in the grout structure will remain. In this case, clean seams must be treated with special compounds, which we will focus on below.

Soda + bleach

photo from the site http://www.remontbp.com

Thanks to its antifungal properties, this recipe copes well with mold, and solves the problem of how to clean the joints between the tiles in the bath.

• Pour 5 tablespoons into a small container. baking soda.
• Add a little bleach, stirring until a paste is obtained.
• Cover the seams with a thick layer of the resulting paste and let it dry completely.
• Brush the compound with a stiff bristled brush.
• Wipe the surface with water using a sponge.

Think about color

This product is only suitable for white grout, as it destroys pigments and, when used on colored materials, will lead to a change in shade.

How to clean the joints between tiles with chemical compounds

photo from the site http://vannalife.ru

You can look for products that can remove dirt from the grout both in hardware stores and in the household chemicals section of supermarkets. It is quite possible that some of them are available on your farm, you don't even have to go shopping.

• Chlorine solutions. A great way to clean the joints between the tiles in the bathroom, as they effectively kill mold. It is impractical to use them in the kitchen or in other rooms. Chlorine bleaches like Whiteness or toilet bowl cleaners like Domestos can help. Apply them to the seams, leave for 10-15 minutes to act, then mechanically remove the dirt. For colored grout, test on an inconspicuous area to avoid discoloration.
• Surfactants. Ideal for cleaning kitchen tile joints where grease is present. Use dishwashing detergents or cleaning products kitchen stove such as Fairy, MrMuscle, Silit or similar formulations. Do not forget to allow time for exposure after application, and only then proceed with cleaning, armed with the hard part of a dishwashing sponge.
• Oxygenated bleaches. Many brands have corresponding products: Vanish, ACE, Persol, Bos-plus, Snow White. Such means are careful with colored grout, but they are absolutely powerless against fungus, so their use is justified in order to clean the joints between the tiles on the floor. In the bathroom, they will help remove stains, but to combat mold, you will have to carry out additional treatment with antifungal solutions.
• Special means. For these compositions, you will have to go to the hardware store, but you will make much less effort to wash out. Consultants will help you choose the best option in order to clean the joints between tiles, but tested and well-proven are BOZO and Ultra-Stripper.

Don't forget about protection

Aggressive chemicals can cause severe burns if they come into contact with the skin or if the vapors are inhaled. Take care of your safety by protecting exposed areas of the body with clothing and heavy gloves, and the respiratory tract with a respirator. It will not be superfluous to turn on ventilation or open windows. If contact cannot be avoided, rinse with copious amounts of cool water.

For stubborn stains, you can buy a special marker to match the grout that will paint over the stains. But you need to use it only after a full antiseptic treatment.

Last resort: mechanical removal

photo from the site http://ru.wikihow.com

It is not always possible to remove long-standing contamination even with special means. They effectively kill mold, and it stops growing, but ugly dark spots remain on the surface. In this case, mechanical methods of influence will help to clean the seams on the tiles in the bathroom:

• Steam generator. If you have such a device on your farm, feel free to use it. A jet of hot steam kills fungal spores and flushes stains out of the grout structure. Treat the seams with a steam generator, staying in each area for at least 3 minutes, then wipe off the dirt with a sponge or cloth.
• Sandpaper. This is a rougher method, removing the top layers of grout in which dirt is firmly embedded. Fold a strip of sandpaper, and with the resulting fold, go over the seams, removing the stains. In order not to spread the spores of the fungus into the deeper layers, pre-treat the surface with antifungal impregnations. After the desired result is obtained, soak the material again with antifungal agents for prophylactic purposes.
• Expander for seams. The most radical method, which is used only when others have shown their failure. But sometimes there is no other way out, as to clean the seams in the tiles in the bathroom, if they are affected by the fungus to the full depth, otherwise it will not work. A screwdriver can replace the expander, but it will be less convenient to work. Remove all grout from the joints, treat them with antifungal impregnations, and, after drying, rub again.

photo from the site http://mr-build.ru

Mechanical cleaning- a rather laborious and troublesome method, but at the same time the most effective. Remember that removing the grout will not solve the fungus problem, and in order for the result to be preserved for a long time, it is necessary to prevent the reappearance of contamination.

Preventive actions

Today in the arsenal of construction chemistry there are many means that are able to maintain the cleanliness and hygiene of ceramic coatings. The simplest, but rather expensive way is to use an epoxy-based grout, which is absolutely moisture-proof, so that the penetration of dirt and the development of fungus in its structure becomes impossible. If an epoxy base is used, it will not be more difficult to clean the joints between tiles on the floor or walls than the tile itself - it will be enough to wipe them with a damp sponge.

photo from the site http://potolkiremontnik.ru

If you are not ready to pay for such convenience, immediately after grouting and during operation in rooms with high humidity, it is worth treating the joints with antifungal impregnations. The following types of such formulations are presented on the market:

• Sanatex Universal;
• Ceresit CT 99;
• Nortex Doctor;
• Capatox.

Re-processing should be carried out at a frequency of 1 every 6 months, so that the question of how to clean the seams between the tiles in the bathroom has lost its relevance. In addition, manufacturers offer to apply hydrophobic compounds to the grout, which eliminate the porosity of the material, making its surface smooth. it great way prophylaxis for all premises, so buy one of the following solutions:

• Ceresit CT 10;
• Bolars Penguin;
• Atlas Dolphin.

And the main rule is not to postpone your battle for purity. Regular cleaning, wiping dry surfaces and cleaning up dirt at the first manifestation will ensure constant cleanliness. The savvy and modern industry are constantly proposing new techniques, so if you have any proven advice, share your ways to clean tile seams in the comments, your experience will be useful to many users.

data-block2 = data-block3 = data-block4 =>

chistvill.ru

How to quickly clean the joints between tiles

Tired of thinking about how to clean the joints between tiles?

Grout renewal

Caring for the tiles in the kitchen, bathroom and other areas of the house gives the owners a lot of trouble. After repair, the tile joints look fresh and neat, but over time, dirt accumulates in them, and when high humidity fungus may be added to it. To restore cleanliness to the joints between tiles, you can use proven methods and freshen the joints without renewing the grout. After assessing the degree of pollution, you can choose optimal way how to clean the joints between tiles: - mechanically; - using household chemicals; - home formulations; - with the help of chlorine-containing products; - using a steam generator.

Fat in the kitchen, soapy deposits in the bathroom, street dirt on the floor in the corridor - all these dirt gradually accumulate, and without proper care the seams lose their aesthetic appearance, which is especially noticeable on grouting in light shades. On the floor, it is advisable to use dark colors on which dirt is less noticeable.

Mechanical cleaning of seams

For shallow contamination, you can do without chemicals and limit yourself to mechanical cleaning of tile joints. You need to take a fine-grained sanding paper (sandpaper) and manually clean the grout lines, being careful not to leave scratches on the tile itself. It is enough to wash off the formed dust with water. This method gives good results in case of surface contamination, but it is often not recommended to use it, since with each procedure a thin layer of grout is removed along with the dirt.

Use of chemicals

Household chemicals

The easiest option is to use a special cleanser such as Pemolux or Domestos. The cleaning powder or gel should be applied to the seams moistened with water, rubbed lightly and left for 10-15 minutes, then remove the dirt with a stiff brush, you can use an unnecessary toothbrush. The remaining cleaning agent must be thoroughly washed off with water. The procedure can be repeated if, after the first attempt, the contamination is preserved.

Home remedies

A good whitening effect is provided by a home remedy, for the preparation of which you need to mix 1 glass of water, 3 tablespoons of soda, 2 tablespoons of citric acid and vinegar. The room in which this composition is prepared and used must be well ventilated; be sure to wear rubber gloves. When processing a bathroom, you must keep the door open and, if possible, forcibly turn on the hood. The resulting mixture is immediately applied to the tile joints and left for about 10 minutes, then the dirt is scrubbed off with a brush and the remaining dirt and cleaning mixture are thoroughly washed off with water. This product must not be used for colored grouting.

For white grout, bleach and baking soda, mixed in equal proportions, will also work. The resulting pasty mass is applied to the seam lines, left to dry, and then washed off with a brush with plenty of water.

You can use hydrogen peroxide diluted with water as a cleaning agent (half a glass of peroxide per glass of water). This composition is also not suitable for grout with colored pigments, as peroxide can discolor it.

Household cleaners are best avoided on the floor, as floor tiles traditionally use darker trowels for which bleaching is not possible. And for the bathroom, where light tones of grout are most often used, these tools, on the contrary, will be very useful.

Steam cleaning

Heavy surface contamination can be removed with a steam generator. Steam cleaning requires a slow stream of hot steam along the seam lines, after which the dirt can be easily washed off with water. The high temperature also helps to eliminate the fungus.

Removing fungus from joints between tiles

In areas with high humidity, most often in the bathroom, mold often appears in the joints between the tiles, which manifests itself as dark spots on and around the grout lines. The fungus not only spoils the appearance of the bathroom or kitchen, but also harms the health of people, causing respiratory diseases and provoking allergies. In order to prevent the formation of fungal plaque, the seams can be protected by treating them with special fungicidal agents, or initially using a grout with antifungal components, and it is also necessary to ensure sufficient ventilation in the bathroom and in the kitchen. You can eliminate the fungus that has appeared with the help of antiseptics, for example, chlorine-containing agents, by treating the surface affected by the fungus according to the instructions and repeating the procedure several times. If the grout has formed a persistent fungus deposit, attempts to clean the tile joints may be ineffective. In this case, only the complete removal of the grouting material and the application of a new grout will help.

Grout renewal

It is very difficult to remove old, heavily ingrained dirt from the grouting joints, especially on the floor, and in advanced cases you cannot do without a complete renovation of the grout. To remove grout between tiles, you can use a special knife, scraper, grinder or other available ways... The gaps between the tiles must be primed and treated with fungicidal agents to prevent the formation of fungus, then you need to carefully fill the joints with a grout and remove excess from the tile surface.

When replacing the grout, the question of how to clean the seams between the tiles will temporarily disappear by itself. If, after repair, you systematically clean the grout lines with a brush and warm water, you can avoid the use of aggressive chemicals and keep fresh look tiles. Tile joints are easier to keep clean if they are cared for regularly.

If you neglect to clean the walls and floors after each bath, sooner or later, repulsive dirt and mold will appear on the walls and floors. Water, lime and dust accumulate at the joints between the tiles, which is an excellent breeding ground for the growth of fungus.

Peculiarities

Tile - excellent finishing material, which belongs to the category of durable and easy to care for. However, rarely does anyone manage to avoid darkening, against which the usual wet cleaning is powerless. The messy look of tile joints that were recently white will upset any hostess.

Before we move on to studying how to clean the seams, let's figure out why the tile joints darken. The level of contamination depends on the purpose of the room in which the tiles were laid. Often, in the corridor and in the kitchen, the coating quickly loses its appearance, because these rooms are more polluted than others. The tiles themselves are washed regularly, but it is much more difficult to clean the seams, so this space is not often cleaned. The way to combat darkening must be selected depending on the type of pollution. Leftovers of food and detergents, dust, street dirt lead to them.

Unfortunately, grout loses its original appearance very quickly, since it has a rough surface in which dirt can easily get stuck. Therefore, when thinking over the repair and design of the room, it is important to take care of practicality and choose a darker grout, otherwise the snow-white seams will delight you with whiteness for a very short time.

We cleanse from dirt

Even after a general cleaning, tile joints can have a sloppy appearance. But there are still ways to return the seams to their original state, and there are a lot of them.

The choice of method depends on the color of the grout and the type of tile itself. The key differences between these methods are the use of household chemicals or home remedies. Both are quite effective.

Soda and vinegar

It is necessary to make a mixture of water and baking soda in a ratio of 3 to 1. You should get a thick paste, which is suitable for cleaning colored joints, but can do harm natural materials from limestone and marble. The work algorithm is as follows:

1. The paste is applied to the joint with fingers in rubber gloves, so as not to cause micro-trauma to the skin of the hands;
2. A solution of water and vinegar is made in a ratio of 1 to 1. The solution is poured into a container with a spray bottle;
3. The product is sprayed onto the applied paste. The mass begins to bubble, therefore, the process of a chemical reaction has begun;
4. Wait for bubbling to stop;
5. Scrub the joints with a stiff brush;
6. Perform wet mopping several times to wash off any remaining solution.

Oxidized bleach

1. Oxidized bleach in the amount of 2 tablespoons is dissolved in 2 glasses of water;
2. It is necessary to test the liquid in an inconspicuous place before applying it to the entire tile surface. In some cases, the color of the joints will change, so make sure that you do not ruin the grout;
3. Water the seams with a solution.
4. We clean in small areas so that puddles of liquid do not collect on the floor;
5. We rub the solution into the joint with a brush. Especially carefully you need to walk around the corners and edges;
6. Finally, rinse the floor well.

Hydrogen peroxide, soda and dishwashing liquid

Make a paste with 3/4 cup baking soda, 1/4 peroxide, and 1 tablespoon of dish soap. This method is very effective due to its components:

1. Soda works as an abrasive;
2. Peroxide reacts with baking soda, thereby providing a whitening effect;
3. Dish detergent removes grease easily.

Apply the paste evenly with a brush to the joints and leave for a quarter of an hour. Wash the seams with warm water several times.

Steam cleaner

Steam cleaners perfectly clean and disinfect gaps between tiles without using chemical substances... This household appliance does not have to be purchased; you will surely find offers for renting it. A steam cleaner is suitable for you, which includes a hose and a brush attachment.

Clean with a steam cleaner according to the instructions. After switching on, wait until the device reaches the required temperature. The instructions will indicate how long you need to wait. The steam method is effective not only for removing dust and dirt, but also mold.

Summing up, it becomes clear that it is easier to maintain constant cleanliness between the tiles than to fight an unequal battle with old dirt and try to scrub off the fungus colonies. To prevent running stains again, apply a protective agent to the joints to keep dirt and mildew from entering the grout.

Removing mold

Another enemy that is extremely difficult to overcome is black mold. Her disgusting growths on the walls and floor between the tiles able to cross out even the most expensive and sophisticated bathroom renovations.

There are several methods that can get rid of this blackness. Let's start with homemade recipes, because many housewives do not welcome the use of chemicals in everyday life, for fear of harm to health. Plus, homemade methods are much more economical than buying expensive detergents.

The most effective recipes for killing mold:

• A paste of soda and chlorine powder. Whiteness or any other cleaning powder containing chlorine will do. The resulting mixture of soda and whiteness effectively brightens and disinfects the surface. But as mentioned above, bleach-containing blends are not suitable for colored seams. Wear gloves and a face shield when handling aggressive chemicals such as chlorine. The mass is applied with a spatula to problem areas before drying. Then all this is washed off with water.
• Citric acid, soda, and vinegar. Another working household method for dealing with mold is a solution of water, vinegar, citric acid, and baking soda. If the moldiness is insignificant, then you can treat the lesions with vinegar without dilution, then rinse.
• Ammonia. Dissolve two tablespoons of ammonia in two liters of water. Then spray the solution onto the affected area. After a quarter of an hour, walk with a damp cloth and wipe dry. The antimicrobial effect of ammonia will help get rid of black plaque.
• Steam. The steam generator will help to cope not only with dirt, but also with mold. The device delivers hot steam under pressure, which softens and pushes dirt out of the tile joints, and the high temperature destroys mold and mildew.

This method is by far the most enjoyable and convenient. When cleaning, you do not have to breathe corrosive chemicals and dilute the dampness in the room. However, there is a risk of getting burned, so work carefully.

Household chemicals

It is not always possible to get rid of blackness with home methods, and then it is worth turning to specialized means aimed at combating mold. Household chemicals do not always give the desired results, and there is little pleasant in the smell of vinegar and bleach. Today there are many effective means that will get rid of mold and protect against its appearance in the future. The most popular remedies include:

1. "Atlas Dolphin"- it is a protective emulsion, it does not clean, but creates a film that prevents the deposition of dirt and bacteria. It is applied immediately after grouting or after cleaning the seams. This protection will help keep your bathtub clean.
2. "Bozo"- a concentrate that removes lime and rust, disinfects and removes odors. It is diluted in a ratio of 1 to 4, but the fungus is directly processed with a pure concentrate.
3. Mellerud - an excellent product for the maintenance of bathroom tiles. Quickly removes soap and lime stains while refreshing grout and tile color. For routine cleaning, it is recommended to dilute 125 g of the product in a bucket of water. For stubborn soiling, use without dilution.
4. "Snowball"- a special pencil that whitens the seams and kills the fungus. The remedy is effective for shallow lesions.
5. Melamine sponge Is not an absorbent cleaning item, as you might think, but a detergent. It is a kind of eraser that erases dirt and erases itself. It is enough to wet the sponge and try to clean off the dirt with it.

All of these substances are much stronger and more concentrated than home components, and this is certainly a plus, and a minus is their high toxicity, so it is better to work in a respirator, ensuring ventilation of the room.

In advanced cases, more serious measures are needed, since the fungus managed to settle deep in the grout. The best thing, of course, would be to remove the old tile, clean and disinfect the surface, and put in a new one. If overhaul is not included in the plans, then you will have to deeply clean the seams.

In no case should mold be left unattended. Fungal spores are extremely hazardous to health, which is known to be the most expensive.

Grouting is tedious and hard work, but worth it... The work can be carried out with a spatula, but it is better to use a drill with a half-disk nozzle, this will somewhat simplify the task. Before work, the tile joints must be moistened with water and vinegar so that the grout becomes more pliable. After that, the joints must be rinsed, dried and treated with antifungal agents, and then wiped again.