What can be cooked from squid: quick and tasty

There are two types of water heaters: instantaneous water heaters and storage water heaters. Instantaneous water heaters allow you to get hot water almost instantly, however, they are characterized by high current consumption (power), which is not always permissible for existing electrical wiring. Storage water heaters consume much less power, while it takes some time to heat the water in the tank. Based on a set of characteristics and operating experience, it has been established that it is storage water heaters that heat water with the help of the greatest demand.

Cumulative electric water heaters consist of a sealed (most often steel) container, and a heating element heating element, which is located inside the tank of the water heater. The water in storage water heaters is heated to the required temperature using a heating element, while relatively low power is used. Inside the storage water heater, the water coming from the water supply system is constantly heated to the required temperature and maintained during its operation. Advantage storage water heaters due to the fact that hot water, if necessary, can be distributed to several water supply points at the same time. For example: using an electric storage water heater in the bathroom and kitchen.

ELECTRIC STORAGE WATER HEATERS "TERMEX"

The fact that electric storage water heaters belong to a complex household appliances, there is no doubt. The loads that the water heater is subjected to during its life are not experienced by any household appliance. Therefore, you need to look at the manufacturer especially carefully.
There are many pitfalls in the production of electric water heaters. Electrochemical corrosion, stray currents, thermal and water shocks, wear and tear of electrical safety components - all this is faced by a water heater during operation. Only a professional who has been purposefully engaged in only this technique for a long time can solve these problems.
There are only a few real world-class professionals. In Europe, the leading specialized manufacturer of water heaters is TERMEX. Since its founding in 1949, it has focused all its efforts in one direction - the production of electric water heaters. By investing all its scientific and technical potential in the improvement of water heaters, TERMEX is now one of the three world leaders.

Some types of storage water heaters "Termeks"

Electric storage water boilers "CHAMPION" and "CHAMPION Slim" series are designed to heat water for sanitary and hygienic needs. A feature of these heaters is the innovative coating of the inner tank - bioglass-porcelain, applied using the BIO-Glasslined technology. Heaters are round, vertical design. Relief valve and power cord included. Diameter of water heaters: CHAMPION - 45cm; CHAMPION Slim - 38cm.

STORAGE WATER HEATER TERMEX ER 50 V

Model: ER 50 V
Series: CHAMPION
Heating time: 1 hour 45 minutes
Dimensions height (mm): 530
Dimensions width (mm): 450
Dimensions depth (mm): 470
Type: Cumulative
Shape: Round
Production: Russia
Anode: Magnesium
Inner tank: Steel

Execution: Vertical
Volume hot water: 50 liters.


Power: 1.5 kW

STORAGE WATER HEATER TERMEX ER 150 V

Model: ER 150V
Series: CHAMPION
Heating time: 5 hours 20 minutes
Dimensions height (mm): 1400
Dimensions width (mm): 450
Dimensions depth (mm): 470
Type: Cumulative
Shape: Round
Production: Russia
Anode: Magnesium
Inner tank: Steel
Inner tank coating: Bio-glass porcelain
Execution: Vertical
Hot water volume: 150 liters.
Internal tank warranty: 3 YEARS
Electrical parts warranty: 1 YEAR
Power: 1.5 kW

STORAGE WATER TERMEX ES 30 V

Model: ES 30 V
Series: CHAMPION
Heating time: 1 hour 05 minutes
Dimensions height (mm): 460
Dimensions width (mm): 380
Dimensions depth (mm): 400
Type: Cumulative
Shape: Round
Production: Russia
Anode: Magnesium
Inner tank: Steel
Inner tank coating: Bio-glass porcelain
Execution: Vertical
Hot water volume: 30 liters.
Internal tank warranty: 3 YEARS
Electrical parts warranty: 1 YEAR
Power: 1.5 kW

STORAGE WATER HEATER TERMEX ES 70 V

Model: ES 70 V
Series: CHAMPION
Heating time: 2 hours 30 minutes
Dimensions height (mm): 940
Dimensions width (mm): 380
Dimensions depth (mm): 400
Type: Cumulative
Shape: Round
Production: Russia
Anode: Magnesium
Inner tank: Steel
Inner tank coating: Bio-glass porcelain
Execution: Vertical
Hot water volume: 70 liters.
Internal tank warranty: 3 YEARS
Electrical parts warranty: 1 YEAR
Power: 1.5 kW

FLOW WATER HEATERS VEP type

Electric instantaneous water heaters are designed for rapid heating of water in the presence of cold water supply.
Instantaneous water heaters work automatically: they turn on at the moment of supply cold water(opening of the valve of the inlet line) and are switched off when the valve is closed.

Electric flow-through water heaters of the VEP type are stationary electric heating devices intended for heating running water for technological and sanitary-hygienic needs at industrial enterprises, agriculture, in everyday life, etc.

Marking of instantaneous water heaters VEP
VEP-X UHL4:
VEP - electric flowing water heater;
X is the power of the water heater, kW;
UHL4 - climatic modification and placement category according to GOST 15150-69. No. By the way a person is protected from injury electric shock the water heater belongs to class I in accordance with GOST 27570.0-87, has a splash-proof design.
Water heaters comply with TU 34 4245-400 NPO "S" -959 / 95-5-92.

A flow-through water heater is a structure consisting of a steel tank enclosed in a casing. A temperature sensor is installed in the upper part of the tank. A heating block is fixed in the lower part of the tank of the instantaneous water heater. A safety valve is installed on the cold water inlet. It combines three valves in itself: the safety valve opens the water discharge hole to the outside when the pressure in the tank rises to (0.67 + 0.03) MPa; check valve through which water enters the tank, but cannot flow back from it if the pressure in the supply water supply has disappeared; the overflow valve opens the outlet of water from the tank into the supply line in the case when the pressure in the tank exceeds the pressure of the water supply by 0.07 MPa. The valve allows you to lower the pressure in the tank while heating the water. An arrow on the safety valve body indicates the direction of water supply to the heater.

The control cabinet of the electric instantaneous water heater contains: a magnetic starter that switches electric heaters, which allow to stepwise change the power consumption 1/3, 2/2, 1 of the nominal; a fuse that protects the control circuit from short-circuit; circuit breakers protecting the device from electromagnetic and thermal overloads.

The temperature sensor TAD101-1 is used as a water temperature sensor, set to a temperature of (75 + 5) degrees. C, it automatically disconnects the heating elements from the mains and turns them on again when the water cools down. If desired, the water temperature can be set from 30 to 90 degrees. WITH.

The delivery set of the instantaneous electric water heater includes: instantaneous water heater; control cabinet; a set of spare parts and accessories (seal - 6 pcs., VP1-1-0.5 A fuse, operation manual).

Some types of instantaneous water heaters such as VEP

VEP-6M: Electric flowing water heater

Brand VEP-6M
Voltage, V 220
Power, kW 6
Overall dimensions, mm 220x240x475

VEP-15: Electric flow-through water heater

VEP-15 grade
Voltage, V 380
Power, kW 15
Overall dimensions, mm 260x290x540

WATER HEATERS (ELECTRIC BOILERS)
HEATING TYPE VEO

Flow-through electric boilers for heating VEO are stationary electric heating devices designed for heating industrial and residential premises in open heating systems with an expansion tank.

Electric boilers VEO are intended for heating residential buildings, recreation centers, public, industrial and agricultural premises, as well as other premises equipped with a water heating system. Distinctive features: in heating mode, the boilers automatically track the set air temperature in the heated room.

Electric boilers VEO operate in an autonomous mode, are protected from overheating, increased water pressure, and consume a minimum of electricity.

Electric boilers may not be the most popular space heating medium and most likely will not be able to compete with gas boiler, but they can well compete with boilers on liquid fuel. Electric boilers are easy to install, operate, compact, and do not require additional equipment, are safe and an environmentally friendly source of heat, as they do not have emissions into the atmosphere.

Specifications heating water heaters VEO can be viewed in our Price list for water heaters.

Our Firm offers storage water heaters produced by "Termeks", instantaneous water heaters of the VEP type, as well as water heaters (boilers) for heating of the VEO type.
The heating element is being manufactured.
Large assortment of room heaters.
You can familiarize yourself with the assortment and technical characteristics on the website page:

General information

Water heaters are stationary electric heating devices intended for heating running water at industrial enterprises, agriculture, at home, etc. VEP-X UHL4:
VEP - electric flow-through water heater;
X is the power of the water heater, kW;
UHL4 - climatic version and placement category according to GOST
15150-69. No. According to the method of protecting a person from electric shock, the water heater belongs to class I in accordance with GOST 27570.0-87, has a splash-proof design.
Water heaters comply with TU 34 4245-400 NPO "S" -959 / 95-5-92.

Normative and technical document

TU 34 4245-400 NPO "S" -959 / 95-5-92

Specifications

Technical data of water heaters are given in the table.

The VEP type water heater (figure) consists of a water heater and a control cabinet.

The water heater is a structure consisting of a steel tank enclosed in a casing. A temperature sensor is installed in the upper part of the tank. A heating block is fixed in the lower part of the tank. A safety valve is installed on the cold water inlet. It combines three valves in itself: the safety valve opens the water discharge hole to the outside when the pressure in the tank rises to (0.67 + 0.03) MPa; a non-return valve through which water enters the tank, but cannot flow back from it if the pressure in the supply water supply has disappeared; the overflow valve opens the outlet of water from the tank into the supply line in the case when the pressure in the tank exceeds the pressure of the water supply by 0.07 MPa. The valve allows you to lower the pressure in the tank while heating the water. An arrow on the safety valve body indicates the direction of water supply to the heater.
The control cabinet contains: a magnetic starter that switches electric heaters, which allow you to stepwise change the power consumption 1/3, 2/2, 1 of the nominal;
a fuse that protects the control circuit from short-circuit; automatic switches that protect the device from electromagnetic and thermal overloads.
As a water temperature sensor, a TAD101-1 temperature sensor-relay is used, set to a temperature of (75 + 5) ° С, it automatically disconnects the heating elements from the mains and turns them on again when the water cools down. If desired, the water temperature can be set from 30 to 90 ° C.

The delivery set includes: water heater; control cabinet;
a set of spare parts and accessories (seal - 6 pcs., VP1-1-0.5 A fuse, operation manual).

Electric flowing water heaters VEP type are stationary electric heating devices intended for heating running water in industrial enterprises, agriculture, in everyday life, etc.

Electric water heater VEP type consists of a water heater, a control cabinet and a safety valve.
The water heater is a structure consisting of a steel tank enclosed in a casing. In the upper part of the tank, a temperature limiter (sensor) of 75 ± 5 ° C is installed, it automatically disconnects the heating elements from the mains and turns them on again when the water cools down. A sensor without self-resetting, set to a temperature of 93 ± 5 ° C, is used as an emergency thermal switch. A heating block is fixed in the lower part of the tank. A safety valve is installed on the cold water inlet. It combines a safety valve that opens the water discharge hole to the outside when the pressure in the tank rises to 0.6 MPa and a check valve through which water enters the tank, but cannot flow back from it if the pressure disappears in the supply water supply. An arrow on the safety valve body indicates the direction of water supply to the heater.
The control cabinet contains:
- magnetic starter switching electric heaters;
- fuse protecting the control circuit from short circuit;
- automatic switches, allow you to stepwise change the power consumption in relation to the nominal.

Hot water today is already a matter of course. In its absence, a huge inconvenience and a feeling of detachment from civilization immediately arise. At the dacha or in a private house, it is not always possible to bring in the central hot water supply, moreover, in apartments with conveniences, it sometimes fails. But progress, fortunately, inevitably affects not only large-scale industrial production, but also the everyday life of people - now you can buy a water heater in a plumbing store and independently take care of comfortable conditions for yourself and your family.

Types and characteristics of water heaters

The principle of action is distinguished:

• Electric storage water heaters (another name "boiler") - represent a container with a heat source, the so-called heating element, placed inside or outside.
• Flowing. They have much smaller tanks - water flows through a rather narrow pipe, heats up and immediately goes to supply. A flow-through electric water heater can be equipped with one of the types of heating elements - heating elements, or an uninsulated spiral.
• There is also a combined option on sale - flow-through storage boilers.

Advantages and disadvantages of a storage water heater

They are convenient because:

• have low power consumption,
• mounted and connected quite simply,
• there is a possibility of servicing several water points at the same time.

The disadvantages include:

• relatively large dimensions due to the increased volume of storage capacity.

Features of models of flow-through water heaters

• The water is heated immediately
• unlike the first ones, there is no need to wait until a new portion of liquid heats up,
• there is no constant consumption of electricity for heating the contents of the tank.

The main disadvantage is that:

• when water is heated, there is a large selection of electricity from the network.
• with a low power of the device, the temperature or pressure may be insufficient for a comfortable shower

Main characteristics

• Type - flowing
• Power - 6000 W
• Productivity 30 ° С - 165 l / h
• Productivity 60 ° С - 85 l / h
• Maximum heating temperature - 75 ° С
• Voltage - 220 V
• Dimensions - 22x24x47.5 cm
• Weight - 12 kg

Water heater VEP-6M

Industrial instantaneous water heater VEP-6M is required for heating running water used for sanitary and technological needs. This stationary electric heater can be used in establishments Catering(for example, for washing dishes), in kindergartens, schools, clinics - in any institution that needs constant hot water.

Advantages

• Flowing... This particular feature of the VEM-6M design is its main advantage. Water heats up while it is in a small equipment reservoir. Although the installation of such a device is more complicated than the storage model, but unlike them, it has an important advantage - it is able to heat an unlimited volume of water;
• High performance... This indicator depends on the degree of heating. At a temperature of 30 ° C, it will heat up to 165 l / h, at 60 ° C - 85 l / h. This feature will allow you to regulate not only the degree of water heating, but also the productivity of the device;
• Dimensions (edit)... With a sufficiently high performance, the water heater is very compact: its dimensions are only 220x240x475 mm.

Technical features

• Power industrial instantaneous water heater is 6 kW. The uniqueness of this model is that with such a high power, a standard 220 V network is required for connection (and not a three-phase 380 V, which is required by other devices with such a power);
• Maximum water temperature- 75 ° C. You can adjust the degree of heating yourself;
• Durability provides special splash-proof housing and metal parts with anti-corrosion coating.

Industrial instantaneous water heater in the online store

You can buy the VEP-6M model directly on our website. To place an order, click on the "Buy" button under the product image, then indicate your preferred form of payment (