What can be cooked from squid: quick and tasty

Its wear occurs, as a result of which, over time, the boiler may need to be replaced. There may be many reasons for this, but the most common is equipment obsolescence or a decrease in its efficiency, as a result of which the heating efficiency of housing decreases, and the size of utility bills increases. Therefore, every person who has autonomous heating installed at home should know how to replace the boiler with their own hands. We will talk about this further.

Types of gas boilers

Before talking about how a gas boiler is replaced in a private house, let's figure out what types of this equipment are.

All models of gas-fired boilers existing today are divided into two types:

closed-type boilers: the burner is located in the combustion chamber, and the supply of fresh air and the removal of combustion products occurs through a coaxial pipe;
open-type boilers: the burner has an open position, due to which the air supply is carried out naturally directly from the premises.

In addition, heating equipment is subdivided into single and double-circuit. The former are designed exclusively for heating homes, while the latter are also capable of heating water to meet daily needs.

Permits documentation

Replacement of a boiler in a private house, as well as its maintenance and repair, can be carried out exclusively by employees of the relevant state bodies. This is due to the fact that gas heating equipment can pose a threat to human life.

In addition, for replacement, you will need to prepare the following documents:

a document confirming the compliance of the boiler room with all safety standards;
DCK inspection report;
documentation for heating equipment;
warranty service agreement;
the project of the premises with the changes made to it.

When all the documents are in your hands, you can go to the Gorgaz to obtain permission to replace heating equipment.

Dismantling the old boiler

Replacing a gas boiler in a private house begins with dismantling the old equipment. You can do this yourself, since the law allows you to perform such work without obtaining permits.

Flush the heating system before disconnecting the equipment from the heating system. This is necessary in order to clean the pipes from impurities that accumulate in them over the long years of boiler operation.

Dismantling is carried out in the following sequence:

water is drained from the system;
the equipment is disconnected from the gas and water supply system;
if your equipment is of a closed type, then it will also be necessary to disconnect it from the ventilation system.

After that, it will be possible to start connecting the new heating equipment. Dismantling can be carried out by Gorgaz employees, but in this case replacing the boiler will require a lot of labor and time.

Boiler room requirements

According to safety regulations, gas heating equipment must be installed in separate room an area of at least four square meters... In addition, the boiler room must be equipped with good system ventilation. The place for it is worth choosing a smooth and heat-resistant.

The equipment should be installed in a location that is easily accessible. If it is of a suspended type, then special brackets are used for wall mounting.

If you live in an apartment and you do not have the opportunity to allocate a separate room for the boiler, then it is not recommended to install it in the bathroom due to high humidity.

What will be required for replacement?

Replacing gas boilers requires the following equipment, accessories and tools:

new gas boiler;
bracket for hanging on the wall;
ball valve - 3 pcs.;
filters for water purification from impurities and debris - 3 pcs .;
gas valve;
gas meter;
gas alarm;
three-core valve;
Voltage regulator;
anchor;
metal sheets;
requirements for connecting the boiler to gas and water supply;
building level.

You can buy everything you need in any specialized store that sells heating systems.

Hardware replacement process

Replacing a gas boiler in a house begins with an application to the appropriate authority. If you install a similar model of equipment, then no changes to the project are required. If the boiler is more modern or it will be installed in a new place, then drawing up a new project is mandatory.

When Gorgaz issues a permit, you will need to contact the company that will install the new equipment for a building passport. This document must be submitted to the gas company along with the package of documents discussed earlier in this article.

At the same time, it is important to understand that the company that will install the new boiler must have a certificate authorizing the performance of this type of work. In order for the replacement of the boiler to be carried out in accordance with all safety rules and regulations, you must be familiar with the installation technology.

Boiler installation instructions

If you have pendant equipment, the first step is to mount the bracket. For its fastening, anchors are used that have a firm fit. In order for the boiler to hang evenly, it is recommended to use a building level when performing work. If in your home the walls are made of flammable materials, then they are sheathed metal sheets... If the heating equipment is of floor type, then no additional measures are required during installation. It is simply installed in a prepared place. It is worth noting that if there is any other gas equipment in the boiler room, then there must be at least 20 centimeters between it and the boiler.

It is necessary to connect to the water supply system through mesh filters that will prevent debris from entering the heat exchanger. In this case, the pipes should be connected to the equipment through a ball valve. It is also recommended to use a special filter to purify water from impurities. This will extend the life of the equipment.

If the boiler is supposed to be connected to the electrical network, then a three-core cable with a plug is used for this. In this case, the socket must be grounded. It is recommended to use a voltage stabilizer equipped with an autonomous power supply for connection. This will protect the boiler from power failures.

If you have closed-type heating equipment, then it must be connected to the ventilation system. This is necessary to remove combustion products from the boiler. To connect, they use which will be responsible not only for the emission of carbon monoxide gases, but also for the supply of fresh air to the combustion chamber.

At the final stage, after connecting the equipment to all communications, the heating system is filled with water and the equipment is checked for operability. This is how any type of boiler can be replaced, regardless of the model.

Possible consequences of self-replacement of the boiler

If you decide to replace the equipment yourself, then in this case you can face very serious problems. In this case, you not only risk your own safety, but you will also have to pay a large fine. If, after connecting the boiler to the gas pipeline, a leak of blue fuel is detected, which will lead to a fire, then all responsibility for what happened lies entirely with you. Therefore, it is not worth the risk, but it is better to contact the appropriate authority.

Conclusion

This article fully examined the procedure for dismantling the old and installing new heating equipment. It is also mandatory in the case of maintenance and repair. For example, if you need to replace the boiler heat exchanger, then you will also be required to call qualified specialists who have permission to perform such work.

But if you still decide to replace the equipment yourself, then be sure to adhere to special instructions and follow safety precautions.

Gas heating is the most common of all possible options. If there are main gas pipelines in the region, such heating is quite justified in the conditions of private houses and city apartments. In this material, we will talk about how to replace a gas boiler in a private house. This process requires high accuracy and thoughtful approach due to the high risk of fire and gas poisoning. In addition, special accompanying documentation and precise instructions are required.

What documents will be needed for work

No matter how paradoxical it sounds, but the lion's share of the time required to replace a heating boiler is spent on issuing permits for new equipment.

During the installation of the boiler itself, the requirements of SNiP 42-01-2002 "Gas distribution systems" must be taken as a basis. It contains all the technical conditions for the installation of a new heating gas boiler. In the same SNiP in the article "Gas supply" the exact procedure for replacing equipment is indicated. Although this document is no longer in force, it contains useful information that is definitely worth referring to.

Some related SNiPs contain a number of rules and regulations regarding gas equipment, ventilation and air conditioning systems, as well as noise insulation and fire safety.

Gas boiler structure

According to state regulations, the placement of a gas installation in a basement is allowed only for single-family houses, in all other cases a separate boiler room is required.

Consider what are the main components of gas heating boilers:

Control device.
Expansion tank.
Traction breaker.
Heat exchanger.
Burner.
Automatic air valve.
Heat exchanger for domestic hot water.
Safety valve.
Gas fittings.
Coolant leakage fuse.
Heating circuit.
Circulation pump.
Gas valve.

Gas boiler replacement technique

Replacing a heating boiler in a private house is carried out in several stages:

First of all, you should familiarize yourself with the technical conditions that are issued by the city gas supply department in accordance with the consumer's statement. In this application, you must indicate the planned volumes of gas consumption per hour for your home. Within 1-2 weeks, subject to a positive decision, the gas service will provide a permit and technical conditions. In no case should a gas boiler be installed without permission without the consent of the regulatory authorities. This is illegal, dangerous, and can lead to substantial fines, especially if there is more than 1 apartment in the house.
After obtaining permission, you can proceed to the design. In the project documents for replacing a gas boiler in a private house, it is necessary to indicate the equipment installation scheme, the gas pipeline route, the communication scheme with the gas outlet sector, as well as the gas pipeline laying scheme to the residential building. This project can only be developed by licensed design engineers who, upon completion of the work, issue an appropriate document.
The next step is coordination with the city gas service. They are directed all project documentation to agree on the site and approve the project. This process can last from 7 days to 4 months.

Together with the project for placing the boiler in the gas station, you need to submit a technical passport and instructions for it, a certificate confirming the compliance of the device with all standards, as well as a sanitary and hygienic certificate. Please note that this list of documents must be provided by the manufacturer of the gas boiler.

Restrictions on the installation of gas equipment

It should be noted that it is forbidden to install a gas boiler in such places:

on combustible surfaces;
in the corridors;
in bathrooms;
in communal apartments and hostels;
in rooms with insufficient ventilation;
on balconies, loggias and basements;
on basement floors, provided that the source is LPG.

Gas boiler installation standards

There are strict rules for replacing a gas boiler in a private house, which must be followed when carrying out work:

more than 4 m 2 of area must be allocated for the installation;
width front door must exceed 80 cm;
the premises need to be chosen light, the window area is calculated based on the standard of 0.3 m 2 per 10 m 3 of volume;
ceiling height - from 2.5 m;
a pipeline with a cold liquid is required;
the cross section of the chimney must correspond to the power of the gas boiler;
it is desirable that the wall panels are even.

Based on these rules, the most appropriate solution is to install a wall-mounted boiler in the kitchen at home. In this room, all conditions have been created for him, moreover, due to its small dimensions, it can be disguised in a closet. But the installation of a floor-standing gas boiler is best done in a separate boiler room.

Is it possible to install a gas boiler yourself

If you are thinking about how to change a gas boiler in a private house, then keep in mind that you should never do this type of work with your own hands. To install gas equipment, it is imperative to invite licensed specialists with the provision of optimal conditions works. The room temperature should be within 5-35 ℃ with a humidity of not more than 80%.

We make replacement of a heat exchanger, burner, sections of a cast-iron gas, diesel, solid fuel heater at a reasonable price. We accept boiler houses for re-equipment, repair and replacement of heating equipment within a radius of up to 220 km from Moscow. We work in Moscow, the Moscow region for the replacement of heating equipment of import and Russian production.

Replacing the heating boiler in the boiler house.

Turnkey cost from 18,000 rubles + equipment

Services when replacing a boiler in a private house:

Selection, supply of Russian and foreign heating boilers to replace old ones.
Replacement of gas, diesel, electric, solid fuel heating boiler (s) with a new one.
Delivery of a heating boiler to the site to replace old heating equipment.
Replacement of AOGV, AKGV with a double-circuit hinged gas boiler in a private house with the issuance of a contract for an annual Maintenance boiler.
Dismantling and disposal of the old heating boiler (s) by agreement.
Completing the new boiler with parts and piping elements: gas supply, fittings for piping for the heating system, chimney in the boiler room, ventilation duct (repair or installation).
Installation of a new heating boiler (s). New or old piping of the heating device.
Replacement, reassembly of the heating boiler and storage water heater.
Replacement of heating equipment (equipment of boiler equipment), re-equipment of a production boiler house according to the project.
Conversion of a gas boiler room in a private house.
Replacing the automation of a gas, diesel heating boiler in a private house.
Before replacing a boiler with an electronic control unit, where the replacement takes place due to the failure of this unit, it is proposed to repair the boiler board.
Transfer with replacement (or without replacement) of a forced-draft diesel-gas burner.
Replacement of boiler equipment at state-owned facilities for KOSGU.
Reconstruction, re-equipment, modernization of boiler equipment and heating systems for commercial enterprises.
Translation, replacement of a fan burner from diesel fuel to gas (methane or liquefied).
Commissioning of a heating boiler for any type of fuel: methane, diesel, fuel oil, liquefied gas, pellets, including solid fuel boilers.
Commissioning of the heating system and boiler (s).
Maintenance work for the heating system of the cottage before replacing the boiler.
Flushing the heating system from rust and scale before installing a new boiler.
Replacement of a gas boiler includes a check of the internal gas pipeline and gas appliances.
Replacing nozzles with a gas boiler when operating on liquefied gas.
We carry out approvals for the replacement of a gas boiler in your area.
Documents for the gas trust when replacing the gas boiler (s) more ...
Conclusion of a service agreement for boilers using any fuel.
Additional services and the price of work are specified at the office of the company at the time of the current time.
Compliance with the rules and regulations, the procedure for replacing a household boiler without violations.

Is the heat exchanger of the Ishma floor-standing steel boiler burned out? Constant overheating of the Baksi Slim gas boiler? The wall-mounted gas double-circuit boiler Beretta is 7 years old, and in the well it is bad hard water and have you changed the secondary heat exchanger more than once? What to do in this case? Do not hesitate - with us you get full technical support for the repair or replacement of a heating boiler in a private house.

It is convenient and profitable to order a gas boiler repair at the beginning, while not resorting to replacing the device. Diagnostics and repairs of an old or faulty boiler does not always end with the replacement of the heating boiler, but when replacing the money spent on a call and technical inspection by our specialist, the customer always retains the service if replacement is inevitable. Please refer to the recommendations of our service engineers for the correct investment when deciding to replace the heating boiler in your home.

Boiler replacement running on gaseous fuel quickly, efficiently, in compliance with all the rules and regulations of the gas industry. Replacing the boiler in the boiler room of a private house without changing the gas project is possible.

We are converting to gas boilers, which before replacement worked on diesel fuel, to be precise, the pressurized burner of the heating boiler is being changed or reconfigured. We draw up and carry out the approval of a permit for the replacement of a gas boiler, subject to the regulatory procedure.

Heating boilers replacement produced in country houses, apartments, enterprise buildings. You do not need to think about where to start, entrust all technical operations to the professionals of our engineering service.

We put in the correct order the paperwork for unauthorized replacement of the gas boiler. The replacement of old Russian gas boilers AOGV, ISHMA, KChM, DON, NEVA, Siberia with new similar devices is carried out out of turn. Guaranteed delivery of Russian gas heating equipment for residential buildings, buildings during the replacement of the boiler.

Repair and service of gas boilers in the Moscow region urgently and around the clock.

Repair, cleaning and maintenance of diesel boilers and burners.

Cleaning or replacing a heated steel chimney of a diesel boiler in the Moscow region.

Repair of electric boilers up to 50 kW and higher power.

Repair and cleaning of the heat exchanger for solid fuel boilers in the cities near Moscow.

Replacing a gas boiler in a private house

Replacing the gas boiler for heating a private house sometimes occurs suddenly during good frosts. Rare case when the owners of private houses keep records of the life of gas appliances and plan to replace heating equipment in advance, being interested in the cost of work and the price of a similar boiler, the rules for replacing a gas boiler and the rules for issuing documents for competent confirmation of replacement. Questions often rest on the cost of replacing a gas boiler in country house, therefore, many owners of heating equipment are trying to make the replacement of a gas boiler with their own hands. Should you invent a bicycle? How much effort, time and money will it take to replace the boiler, will it be possible to start it up? This is especially true for the option when the floor-standing gas boiler is replaced with a wall-mounted double-circuit gas apparatus. In the end, all the questions will have to be answered independently and only correctly.

The answers to all these questions are known by professionals, who will briefly and clearly define the essence of the problem and the procedure for further actions in case of emergency replacement of a heating boiler in a private household. We have been working in Moscow and the Moscow region for a long time for physical and legal entities for the implementation of installation and commissioning works for boilers at various forms fuels, including diesel fuel and liquefied gas. There are 7 technical departments in the Moscow region to service maintenance contracts.

A special case is the identification of a serious breakdown in a gas boiler after purchasing and installing a defective device on its own. Here you need to follow all the rules for the guarantee of the gas appliance and specify the replacement options in the warranty service center, where you will be politely asked for a warranty card certified by the seal of a specialized organization and a signature of the service engineer who commissioned the boiler.

Today is 2019 and the most correct solution- contact a specialized organization and order the replacement of a gas boiler with a full range of works. Professionally trained engineers will do this technical operation in a private house quickly, accurately, according to optimal prices... The debugged algorithm of technical actions when replacing a gas boiler from year to year has led the prices in our service to minimize cash costs for the customer of the service. And if it happened to find a technical defect through the fault of the manufacturer (for example, a microcrack in the heat exchanger), then replacement after commissioning with the help of a guarantee will happen almost imperceptibly and free of charge.

We wish everyone who got into a difficult situation to replace a heating boiler in winter patience and endurance. From our side, we guarantee maximum technical support to eliminate the accident. We wish everyone peace and warmth in your homes!

Isn't it time to renovate the boiler room?

The cost of work on replacing the boiler from 15,000 rubles

Have you thought about high-quality heating at home? Stop overpaying for utilities... Get advice on how to do this without leaving your home. There are many types of renovations. Some are cosmetic, when you need to touch up the boiler or replace a couple of parts. What can be done often on your own and without the help of a specialist. But, unfortunately, after a long period of operation of the boiler, urgent repairs are required, and in the future it is possible to replace the heating boiler.

Everyone wants to live in warmth. Especially with the onset of cold weather. When it comes to heating your home, remember that this is an important part of your investment. There is simply no point in overpaying for extra electricity or gas. Most believe that if the boiler is quite old and has served for a long time, then it does not need repairs.

Better to raise money and buy a new one. To some extent, this is true, but we must not forget that the new boilers are not adapted to our power outages, power surges and different gas supplies. This is where most of the problems related to home heating appear.

Repair of the boiler house is the most rational way out of this situation. If heating system relatively new, then you can call a specialist he will be able to determine defects or malfunctions. Automation is a common cause of breakdowns.

She most often can fail. Poor quality or untimely power supply disables even the highest quality system. You can resort to buying a stabilizer. He will be able to slightly correct the power supply, but the unit is unlikely to be able to prevent further breakdowns. It is better to spend money on repairing the boiler room than buying expensive automation.

Reasons for the inevitability of failure

Everything comes to an end, and this also applies to boilers.
After working for more than five years, they wear out and become suitable for further operation.
Replacing a heating boiler is a very laborious process if you do it yourself.
First you need to decide what brand it should be.
A wide range of products is currently presented on the market, but if you are negligent and without consulting a specialist in advance, you can be left without money and without heat.
Then you need to decide on the type.
There are well-known gas boilers, electrical.
Relatively recently appeared on liquid fuels, solid fuel boilers, they have a lot of advantages.
There are also combined ones, they include the ability to control the heat supply.
You can use as fuel different variants, for example, firewood and gas.
Many models have electronic controls.
The main criterion for choosing a mechanism, of course, is the budget.
We advise you to calculate in advance the area of a house or cottage in order to determine the fuel consumption per cubic capacity of the room.
You can save a lot on this and not overpay for extra meters.

Therefore, by contacting us, you will receive many services. Boiler room repair, heating boiler replacement, individual consultation in the purchase of goods. You need to learn to save wisely and not overpay a lot of money for intermediaries. Take care of your family and friends, let the warmth come to your home today.

We worked and work here Moscow The Moscow region Tver region Kaluga region Vladimir region Tula region Abramovka Abramtzevo Avdeevo Avdotyino Avsyunino Abramtzevo Akatevo Alabino Alabushevo Aleksandrovo Aleksino Alpatieva Alferevo Andreevka Astapovo Ateptsevo Afanasovka Ashitkovo Ashukino Babenka Baksheyevo Barabanov Baranowski Barvikha Barvikha sanatorium Barybino Barynin Bezzubov Bekasovo Beloozersk Beloomut White Kolodezi White Columns White Rust Bielany mountain Birch holiday Birch Biorki Birevo Biserova Bobkov Bogatisheva Bolychevo Big Vyazemy large yard large Alekseevskoe large Gridino large Gryzlovo Borisov Borovkova Borodino Bortnikov Botovo Boyarkina Bratovschina Bronnitsy Budenovets Buzhaninovo Buzharovo Bunkovo Bunyatino Burtsev Vaskino Great Yard Velyaminovo Verbilki Veselevo Vishnyakovsky Villas Leader Proletariata Volkovo Volokolamsk Volchenko Vorobyevo Raven Voskresensk Vostryakovo Vysokovsk Vyshegorod Ganusovo Gar-Pokrovskoe Waterworks Settlement Glubokoe Golitsyno Go Lovkova Gorbovo Factory Goretovo Slides-Kolomna Horlovks Mound pot Grishino Gubin Davydkovo Davidovo Darischi Dashkovka Dvoriki Dedenevo Dedinovo Demikhova Denezhnikovo Denkovo Dmitrov Dmitrovo Domodedovo Donino Dorokhovo Drezna Dubky Dubnevo Dubrovicy Durykino Dukhanino Dyutkovo Evseeva Elgozino Elizarovo Eldigino Ernovo Ershovo Efremovskaya Zhavoronki Zhitnevo Zhuravno Zavety Ilicha Zavorovo Zagorski Dali Zakubezhe Zaovrazhe Zaprudnaya Zaraysk Dawn Communism Zakharovo fur farms Green Grove Zelenogradskiy Green Zendikovo Banner October ZYKOVA Ivakino Ivanovka Il'inskii Il'inskii Pohost Ilinskoe Ilinskoe-Teryaevskoe Ilinskoe-Usovo Ilinskoe-Yaropoletskoe Industry Istra Kabanovoy Kalininets Kalistovo Kamenskoe Karinskoe Kashino Kashira Klemenova Klementievo clamping of Sovhoz Klenovo Wedge Kliazma Knyajevo Kokino Kokoshkino Kolychevo Kolyubakino Konobeevo Korystovo Kostomarovo Koshelevo Krasnaya Gora Krasnaya Zarya Krasnaya Poima Krasnovidovo Krasnozavodsk Krasny Tkach Red Hill Kratovo K Rivandino Cool Kuzmino Kurovskoe Curtino Kuryanovo Ladygino Lenkovo Leontyevo Forest Lake Summer rest Letunova Likino-Dulyovo Lipino Lipitsy Litvinovo Loginovo Vine Lopatinsky Meadow Village Luzniki Lukerino Luchino Lukoshkina Lukyanovo Luneff Lytkino Lyschikovo Lvov Lyubuchany Makeevo Maksheyev Shallow Dubna Malivo Malyshevo Mamontovka Mamontovo Manihino Mansurovo Marushkina Marfin Brod Maslovo Sovhoz Mendeleevo Mendyukino Meshcherino Mesherskoye Mistsevo Mityakina Mikhailovskoe Misheronsky Mishutino Mozhaysk Youth Muscovite Mostovik Muranovo Mukhanovo Nazaryevo Naro-Fominsk Narsky Narynka Nakhabino Nekrasovsky Nelidovo Nepetsino Nepetsino Nizhnee Khoroshevo Nikitskoe Nicholas-Kropotki Nikolskoe-Gagarino Nikonovskoe Novaya Derevnya Novaya Olkhovka Novobratsevsky Novoyogoriy Novozagare Novopetrovskoe New building Odinoginovo Ostashevo Pavlovskaya Sloboda Pavlovsky Posad Pervomayskoe Perkhushkovo Petrovo Pecherniki Pirochi Povarovo Moscow Region Sanatorium Podolsk Podosinki Podhody Podyachev on Pokrovka Pokrovskoye-Sheremetyevo Polbina Poluryadenki Polushkino Pominovo Riverlands Fixes Pravdinsky Privokzalny spaciousness Priokskaya Proletarian Protekino Psarki Ptichnoye wasteland Pushkino Pyshelitsy Radovitsky Rainbow Ramenky Ramenskoye Rassudovo Rakhmanov Redkino Rechitsy Reshetnikovo Reshotkino Rzhavki Rogachevo Springs Ruza Fish Ryazanovo Savvinskaya Sloboda Svatkova Selkovo Selyatino Semenovo Semkhoz Senezh Sennitsy Sergiev Posad Silver ponds Serednikovo Serpukhov Simbuhovo Sinichino Sitnya-Schelkanovo Skoropuskovsky Sloboda Smenki Snegiri Sobolevo Sokolova Pustyn Sokolnikova Solnechnogorsk Sosnovka Sofrino Spassov Satellite Staraya Kupavna old Ruza old Sitnya Starikov Old town Stegachevo Stepanovski Stepantseva Stepanschino Stolbovaya Stremilovo scab Sudnikovo Sychev Taldom Taraskovo Tarbushevo Tatarinovo Tashirovo pace Teryaevo Timonino Tishkovo Tolstyakova Topkanovo Torgashino Troparevo Trudovaya Tugolessky Bor Tumenskoe Tuchkovo Tyutkovo Uvarovka Shock Specific Uzunovo Ulyanino Usovo Us Penske Fedortsova Fedosino Fedyukovo Fryazevo Harlampeevo Khatun Holscheviki Hotkovo Hripan Chemodurova Cherkizovo Chernevo Chernogolovka Cherusti Chismena Churilkovo Shalikovo Shatura Shaturtorf Sheino Shestakovo Shubin Shugarovo Shustikova Elektrogorsk Elektrougli Yurlovo Yurtsovo Yakimovka Yakovlevo Yakovskoe Yakot Yam Yamkino Yaropolets Yahroma Minsk highway Warsaw highway Kiev highway Kashirskoye Novoryazanskoye highway Yaroslavl highway Novorizhskoe Leningradskoe highway Kaluzhskoe highway Dmitrovskoe highway Egorievskoe highway Rublevo-Uspenskoe highway Ilinskoe highway Volokolamskoe highway Borovskoe highway Podushkinskoe highway Ostashkovskoe highway Rogochevskoe highway Schelkovskoe highway Altufevskoe highway Kurkinskoe highway Skhodnenskoe highway Novoskhodnenskoe highway Lotoshinskoe highway Rublevskoe highway Ilinskoe highway Uspenskoe highway

Gas equipment used in the private sector is classified as hazardous. Therefore, all actions for installation, repair, maintenance and replacement of the boiler are carried out exclusively by specialists. They have passed deep theoretical training and acquired skills for handling gas equipment. A special license is issued to carry out such activities.

Using the rated power and productivity, a calculation is made for the thermal energy generator used to heat private house... If the parameters decrease, it is necessary to update the boiler equipment. There can be many reasons for installing new boilers. Take insufficient performance as an example. The heated area is often increased due to the extension, new appliances are connected that heat the terraces and basements. It may be necessary to introduce additional functionality. To ensure comfort and coziness in a private house, a hot water supply circuit is required. And the use of double-circuit gas models generally combines a water heater with a heating boiler. Today, instead of atmospheric boilers and units, where there is a forced removal of flue gases, condensation heating devices have appeared. The efficiency of the new equipment has increased by 110%. Replacing a boiler is often associated with wear and tear of the old one. It is better to replace it in a timely manner, saving money, because it is very expensive to constantly repair an installation that has been in operation for a long time.

To replace the gas boiler, according to experts at EnergyService.com.ua, legal issues are resolved first, and, having received the support of the gas supervisory authorities, you can proceed to practical implementation. We adhere to the following sequence of actions. We submit an application to the gas service at the place of residence to obtain a permit. We receive technical specifications, where the project must correspond to the early version, if necessary, we agree on an increase in the volume of consumed gas, after examining the metering devices and pipes, we receive a conclusion. Next, it is necessary to conclude an agreement with the company engaged in installation and subsequent warranty service. This is followed by the dismantling of the old unit and the installation of a new boiler. It all ends with the acceptance and delivery of equipment to the gas control service.

It is necessary to provide a solid package of documents to avoid possible problems in case of violation of the norms and independent replacement of gas equipment. Firstly, if the boiler is imported, you will need to provide a certificate indicating the standards corresponding to domestic indicators. If the model is double-circuit, there is a need for a sanitary and hygienic conclusion on hot water for household use... Usually the mall issues all of this documentation. Next, an act is required, where it is confirmed that the smoke and ventilation ducts are suitable for use, as well as an act that the boiler is connected to engineering systems... For a period of one year or more, a contract for warranty service of equipment is concluded with the company. Problems often arise if changes are made to the project, because the most important thing is that all actions during the installation of the boiler are legalized.

There is an opinion that it is very simple to remove old equipment, but if there is no experience, then the task may become more complicated: the tightness of the connection of the heating system pipelines may occur. Let's present the most general list of actions required for dismantling. Using the tap, disconnect from the gas main; we de-energize devices that depend on electricity; we shut off the pipeline that connects the heating and water supply; then we disconnect the pipes that ensure the systemic circulation of the fluid; we disassemble the structure with which it is connected chimney.

To install a new boiler, it is also necessary to perform a large amount of action. You may need to transfer gas pipes, lead the power cables or even equip a special drain to dispose of acidic condensate. If a new boiler is used, but an old heating is used, then filtering devices are installed. The best way if a mesh flushing or a special filter cartridge is provided. If you are going to convert gravitational heating into a closed form, then it is necessary to install a valve and a tank. Upon completion of the equipment replacement procedure, specialists hand over the facility to the supervisory authorities. Pre-commissioning activities are also a mandatory step. The system is filled with a coolant, the unit is tested for functionality, and the draft in the pipe is being checked. To replace gas equipment, it is better to contact a specialist. With a well-performed installation, the equipment will function for a long time without the need for revision or repair.

P.S. My name is Alexander. This is my personal, independent project. I am very glad if you liked the article. Want to help the site? Just check out the ads below for what you recently searched for.

The most common reason for refusal to install autonomous heating is problems with its documentation.

The first document that needs to be studied is the SNiP 42-01-2002 Gas Distribution Systems manual. It is in it that all the important technical conditions for the installation of gas boilers are located. Also in SNiP there is an article "Gas supply", which establishes the procedure for replacing a gas appliance. And although it has already lost its force, in SNiP you can learn a lot useful information for the installation of gas boilers.

Additional rules and regulations on gas appliances, heating, ventilation and air conditioning, on noise insulation and fire safety are given in the adjacent SNiP.

Boiler device

By law, only residents of single-family houses can install a heating device in the basement. Let's take a closer look at what the boiler diagram looks like.

The photo shows the components of the boiler and the principle of its operation:

control device;
traction breaker;
expansion capacity;
heat exchanger;
burner.
air valve (automatic);
heat exchanger for the hot water supply system;
fuse;
gas fittings;
fuse to prevent leakage of heating fluid;
contour fittings;
the driving element of the coolant (circulation pump);
gas filling valve.

Boiler replacement procedure

Acquaintance with the technical characteristics.

Technical conditions are obtained in the city gas supply department. To do this, you need to submit an application indicating the volume of gas consumption per hour in your home. The official processing time is 1-2 weeks from the moment when you will be given an application with a positive decision.

Design.

The development of a project for the installation of a gas appliance begins from the day the permit is obtained. It is carried out by licensed design engineers, who are required to issue a supporting document to you. The project should contain schemes for installing a boiler, laying a gas pipeline, communications with the sector, gas outlet, placement of gas communications with residential buildings.

Gorgaz solution.

After development, the project is sent to the Gorgaz organization, which must approve it. This can take from a week to 4 months.

Together with the project, you should also submit:

technical passport and instructions for the boiler;
sanitary and hygienic certificates according to technical requirements;
a document confirming the compliance of the boiler with all standards.

These documents are prepared only by the boiler manufacturer.

If Gorgaz refused to install, then it is obliged to give reasons in writing, and also propose options for changing the project. If the project is completed at the "five", then it will be certified.

An approved project is a pass to the installation work of a gas boiler in a private house.

Prohibitions and restrictions

Wall-mounted or floor-standing gas boiler must not be installed:

on combustible planes;
in corridor passages;
In bathroom;
in "communal apartments" and hostels;
in unventilated rooms;
in basements, on a balcony or loggia;
on the basement floor if the fuel source is liquefied carbon gas (LPG).

Rules for installing a boiler in a private house

The standards for the installation of household gas boilers are extremely simple, but mandatory:

installation area - more than 4 square meters;
front door width - more than 0.8 m;
light source - windows of at least 0.3 m2 (10 cubic meters premises);
ceiling height - more than 2.5 m;
the obligatory presence of a pipeline and a cold liquid;
equal power of the device and the cross-section of the chimney;
smooth wall coverings in the room.

Judging by the list, the most correct solution is to install a gas boiler in a private house in the kitchen, where the stove is also located. The kitchen is similar in structure to the boiler room, therefore, the installation of a wall-mounted boiler will meet fire safety requirements, and will also simplify the connection of hot and cold water supply. At the same time, the gas water heater is easy to hide in the closet. But for a floor-standing gas boiler, it is necessary to allocate a hotel room for a boiler room.

How to install a device in a private house with your own hands?

It is strictly forbidden to install gas appliances on your own. The boiler can only be installed by experienced specialists in compliance with the requirements.

Installers are obliged to:

check the license for the installation of gas equipment;
to endure temperature regime- 5-35 degrees C, with humidity up to 80%.

Thus, it is impossible to install a gas boiler in a private house with your own hands. This is a complex and dangerous equipment that only specialists have the right to connect.