What can be cooked from squid: quick and tasty

Who said that the fountain is purely a street gadget? Modern decorations of this type are used with equal success both outside the home and indoors - everything is decided by the size and design. For apartments and houses, as a rule, they are used small size fountains, which are called "home fountain". It is about them, or rather about their options self-made, the conversation will go in this article.

A person can contemplate three things for a long time - for a long time he is not able to take his eyes off the flame, flowing water and from how someone else works. It is for this reason that the most common decorations in houses and apartments are all kinds of fireplaces and fountains. This article will focus on fountains - together with the Dream House website, we will deal with the question of how to make a home fountain with our own hands? We'll consider different options self-production of this decor and, most importantly, we will deal with the principle of creating such things, the knowledge of which will allow you to independently design these products at home.

DIY home mini fountain photo

Home fountain: how it works

Most of you will probably be surprised at how simple a fountain is - you could even say that by the standards modern technologies this is an elementary thing that does not cause any difficulties in manufacturing. If you deal with its design, then you can divide it into just a few separate parts. Plus or minus, of course, since there is no limit to perfection, and it can be improved, as they say, ad infinitum.

And as for the principle of operation of such devices, then there is nothing special to understand - the movement of the liquid is simply looped back. There is a container from which the pump pumps out water and supplies it to the fountain nozzles - flying out in the form of a beautiful decorative jet or flowing down as a waterfall, it returns back to the same container, from which, again, it is sucked in by the pump and sent to the next ring cycle. This is the whole fountain.

How to make a fountain at home: options

Among the most common options for making home fountains with your own hands, you can single out just a couple of more or less successful designs. To be frank, there is only one completely successful - the first variation, although acceptable for a house or apartment, still has several significant drawbacks.

Depending on the required size, intermediate tanks can also be installed - to create a so-called cascade of waterfalls, which will look much more attractive. The principle of making such fountains is no different from a single waterfall - the only thing added here is one or more intermediate containers. In such a situation, water is pumped into the upper tank, from where it flows by gravity into the tank located just below. In turn, water from this reservoir will drain into the container located below - with this approach to business, the number of containers can be unlimited.

Home fountain photo

How to make a home fountain with your own hands: installation without a pump

I will make a reservation right away that this is not a perpetual motion machine, and such a fountain cannot work indefinitely - this is an excellent toy that clearly demonstrates the work of the laws of physics and nothing more. Depending on the containers used in the design of such a fountain, you can count on 10, 15 minutes, perhaps even half an hour of operation time - then you need to recharge, which you will get tired of doing in the very near future.

It is o, which requires three containers connected in series with tubes to each other - this is a completely sealed system that works thanks to an air lock. From the receiving bowl, water enters the lowest, and most importantly, empty container - it presses on the air in it, which, in turn, creates pressure in the upper container (it is with water). It is this pressure that makes the water rise upward in a fountain. Most interestingly, the lift of the jet can be quite large and reach 1m in height. Moreover, this fountain can even be somewhat "automated" - to organize its recharge with less time and effort spent. Undoubtedly, this is a noteworthy invention of mankind, which should be devoted to a separate article, which we will do in the future.

How to make a home fountain with your own hands: Heron's fountain photo

To conclude the topic of how to make a home fountain, a few words about very attractive additions that will allow you to contemplate not only the sight of flowing water, but also to observe various effects. The very first thing that comes to mind here is. You can organize it different ways but the most interesting one is the use of a small electric generator. A small device bought in a store is quite capable of making the LEDs glow - you can arrange them as you like and anywhere, the main thing is not to forget that water and electricity are incompatible things in principle.

Even the smallest fountain can transform the landscape of a summer cottage or a private house beyond recognition. The decorative structure will definitely become a favorite corner of your site, because it will give you the opportunity to unite with nature at any moment. Do you want it to become a reality faster? There is nothing super complicated here - everyone can make a fountain with their own hands. Don't believe me? Then to your attention a step-by-step instruction with a photo, following which you can quickly and without the involvement of professionals get a spectacular and functional fountain.

First of all, you need to choose the right type of fountain for your site. We are talking about its dimensions, shape and materials. When solving this issue, be guided by the area and style of the courtyard of your summer cottage or private house.

So, for a large plot, it is better to choose a classical sculptural model, which will become the center of the landscape composition. And for a modest courtyard, fountains in the form of small architectural forms are suitable: sea shells, fairy-tale heroes, houses, pots and other similar figures.

But it is not necessary to buy a ready-made sculpture, because you can also build a fountain with your own hands. The simplest option is a stone construction. To make it, lay large flat stones on top of each other, make holes in each of them with an electric drill and string all the resulting products onto a copper pipe - it is through it that water will flow to the top of the structure. Then close the gaps with small pebbles and process the cracks. silicone sealant.

Choosing a location

The next step is to decide exactly where the fountain will be located on the site. In order for a structure to fully fulfill its aesthetic function, it cannot be installed “anywhere” - it is important to choose the best location. And for this you need to take into account several nuances.

1. First, the fountain has no place for too open area, since under the influence of active sun rays the water may begin to bloom.
2. Secondly, the fountain should not be placed among powerful trees - their roots can provoke deformation of the reservoir and waterproofing. In addition, the leaves, fluff, fruits and seeds of trees will constantly pollute the fountain.
3. Thirdly, the structure should not be too close to the house, otherwise moisture with the flow of wind will fall on its walls.
4. Fourthly, it is undesirable to stir the fountain in the open wind, so that its gusts do not "break" the jets.

Thus, the ideal location for a decorative fountain is a light partial shade surrounded by flowers and low bushes.

When you choose a place, proceed directly to the arrangement of the fountain. It involves the phased implementation of three main groups of work:

• tank preparation;
• pump installation;
• installation and decoration of the fountain.

Preparing the tank

In order for the fountain to be durable and solid, it is necessary to equip a special reservoir for hydraulic equipment and water. This is done as follows:

• Dig a pit with a pre-calculated depth and diameter you need.

Important! The depth level of the tank must be below ground level so that the soil around the fountain bowl does not wash away and the base does not deform.

• Pour a thin layer of sand on the bottom of the pit and carefully reinforce its side walls with bricks.
• Cover the inner surface of the pit with a thick plastic wrap - it will prevent the passage of water.
• Secure the tape along the top edge of the tank and seal the seams with frost-resistant silicone sealant. Pour stones on the bottom of the pit, spreading them over the surface of the film. The stones should not be sharp so as not to deform the film.
• Equip a small emergency drain near the pit in order to prevent an increase in the water level in the tank.

Install the pump

The fountain cannot work without the most important mechanism - the pump. It is he who is responsible for the continuous movement of the water flow. General principle The action of the pump is simple: the water is thrown out through the nozzle into the tank, then enters the pipeline, where it undergoes coarse and fine cleaning, and then, already purified, is sent back to the nozzle.

The quality of the fountain's functioning directly depends on the type of pump:

• Submersible - works on the principle of a centrifuge and is located in the center of the fountain tank under water. This is a cheap but reliable device, for the installation of which no fasteners are needed - the submerged pump is quite heavy, so it does not budge itself. It is suitable for small weak fountains.

• Surface - a more serious type of pump that is not installed inside the tank, but on its edge on the surface of the earth. Such a device is intended for large fountains with a complex design.

The piping for the pumping system can be constructed from plastic pipes... Their optimum diameter is 16 mm.

Advice. In order to enhance the work of the pump, additionally install a pressure tank - it will guarantee a constant pressure of the water flow.

Fountain decoration

After the main functional elements are installed, you need to take care of the installation of the fountain itself, or rather its upper part. If you are already using finished sculptures, then they must be provided with special fasteners for installation. But a homemade stone fountain is best installed on metal slats previously laid on top of the tank.

Then start decorating the structure. The fountain can be decorated with plants, multi-format stones, clay figurines, microsculptures and any other details that seem appropriate to your site.

Do not forget about such a spectacular decoration tool as lighting. It can be underwater lights, light strips, floating lanterns, ground lamps - here you are also unlimited. But remember that lighting structures must be completely sealed, and all their contacts must be protected from water as reliably as possible, otherwise it will be unsafe to use them.

When all work is completed, fill the tank with water and start the fountain.

As you can see, to make a beautiful fountain with your own hands, you do not need to work hard and spend a lot of money. Do not deviate from the instructions, use quality materials and do not be afraid to experiment with decor - observing these three simple rules, you will definitely get a functional fountain that will delight your eyes and tune in a positive way for more than one year.

What fountain to choose for a summer residence: video

Every year millions of people devote huge funds to visit exotic places on the planet. You can recreate natural beauty in miniature by making a decorative indoor fountain with your own hands. The lively murmur of water has a beneficial effect on the emotional state of a person. In addition, it is impossible to take your eyes off her.

The design gives the room not only a luxurious look, but also humidifies the air in the hot season. To create a decorative indoor fountain with your own hands, it is not necessary to purchase expensive installations. The main thing is to be patient, turn on the imagination, pick up the tools and work miracles. First, let's take a look inside the structure to understand how it works. Then we will get acquainted with the types of indoor fountains. Finally, consider step by step instructions creating a natural miniature for the home.

The fountain is not only a decorative element. Since it humidifies the air wonderfully, it should not be installed near wooden furniture.

Why does water flow

"All rivers flow into the sea, but it does not overflow." So it is said in the most ancient book of mankind. We see confirmation of these words every day, when snow or rain falls from the sky to the earth. The Great Designer launched the water cycle in nature. Imitating him, experienced craftsmen created with our own hands a decorative indoor fountain that pleases the heart all year round... How does this system work?

The design is based on a unique water cycle in a closed system. They start it with the help of an electric power supply. It lifts the liquid upwards, after which it flows gracefully into the storage bowl.

There are decorative fountains that use several of the same containers. They are built at different heights, connected by pipes. Pouring liquid into the vessel at the top starts the system. Conventional physics plus creativity and good hands. The result is an exotic corner with a quiet murmur of water that soothes the nerves.

How to create a decorative indoor fountain with your own hands: step by step instructions

Before getting down to business, you need to think about the size and place where the structure will be installed. For example, in small room it is inappropriate to place a huge fountain. Conversely, in a spacious room, a miniature structure can go unnoticed. The decorative fountain is placed on the floor, wall or table. Much depends on the overall design of the room and the number of household members.

Depending on the movement of water, fountains are:

1. Cascading - the liquid falls along decorative steps or ledges.
2. Closed - water moves in flasks or flat containers attached to the wall.
3. Gushing - the jet is directed upwards, after which it falls into a miniature pool.

There are wall art backlit options that create a unique ambiance in the room.

When choosing a place for a structure, small children and pets should be taken into account. The main thing is that the structure does not interfere with anyone.

But how to make a do-it-yourself fountain at home in order to fill it with exquisite exoticism.

Of course, first you need to understand how the structure works, and then collect the necessary items:

• suitable capacity;
• aquarium pump;
• flexible hose;
• waterproof glue;
• decorative elements (expanded clay, shells of various sizes, colored soil, wood, ceramic products);
• backlight (optional).

A vessel of any shape is suitable as the main bowl. The main thing is that water does not flow out of it. The upper part of the pump for a small fountain is equipped with a sprinkler. Since the dimensions of the structure are very small, the handpiece does not need to be worn. Otherwise, water will flood the nearby area of ​​the room.

It is quite possible to design a miniature pump yourself, since the unit has a relatively low power.

Getting started with the creative process

Those "who despise the day of humble beginnings" never succeed. Therefore, having collected necessary tools and materials for construction, wise guys get down to business.

Consider the traditional master class for creating a do-it-yourself indoor fountain at home:

1. A piece of about 10 cm is cut from a suitable hose (can be aquarium). Its diameter should match the pump tip.
2. A pump is attached to the bottom of the tank using suction cups and connected to the tube.
3. The resulting space is filled with expanded clay or stones, leading out a tube between them.
4. To give the fountain a presentable look, all elements of the device are carefully masked with all kinds of shells, pebbles or glass.
5. Depending on the preferences and the interior of the premises, the design of the structure is performed using various objects.

Stylish exotic in the interior of the bedroom

A small tabletop fountain can be built from flower pot with a diameter of about 25 cm.

For work you will need:

• durable capacity;
• pump;
• translucent balls or pebbles;
• aquarium plants;
• paints for painting on ceramics or glass.

Used to base a fountain. To give the structure a stylish look, the container is painted with special waterproof paints. To circulate the liquid, a pump is installed, a hole is made and the tube is brought up.

The bottom of the fountain is decorated with decorative balls, shells or pebbles. After filling the system with water, aquarium plants are placed inside. They give the design an exotic look and uniqueness. Simple circuit creating a design opens up great opportunities for novice craftsmen.

A brook murmurs in a fountain and without a pump

Perhaps only a few had to observe natural geysers in all their glory. As you know, there are no pumps and no electricity. But such a release of water causes unprecedented admiration. Of course, at home it is impossible to create such a phenomenon without electricity. However, there is a way out!

For the construction of a miniature fountain without a pump, use:

• several containers;
• thin tubes;
• connecting adapters;
• sealant (if containers are made of plastic);
• decor elements.

First of all, a small hole is drilled on the bottom of each bowl. Thin tubes are pulled through them, after which they are sealed with cold welding. The procedure will protect the system from fluid loss.

• Video: making a mini stream yourself
• Video: pond, stream for home
• Principle of operation
• Video: a small version of the stone yourself
• Design features
• Assembling the structure
• Video: an interesting option from a tire

The fashion for fountains for an apartment and a house appeared in our country a long time ago and is currently experiencing its rebirth. A similar decorative technique for decorating the interior of living rooms today is considered an original solution to revitalize it and give some freshness to the interior space of the premises.

How to make a fountain with your own hands? If there is sufficient space, it is possible to build a home fountain or a small lake with water lilies - all this is a matter of your imagination and taste.

A home fountain can turn out to be a good technique for arranging little inhabited corners of your apartment (loggias with plants, for example). If the area is small, then you can make a mini waterfall.

Back to content

Video: making a mini stream yourself

Before you start building a waterfall, you should study a number of examples in photos and videos on the Internet, where indoor fountains are presented in all their variety. Having decided on the size (mini or larger option), appearance, constructive performance (waterfall, stream, etc.), you can start creating a fountain with your own hands.

Back to content

Video: pond, stream, for home

Back to content

Principle of operation

The indoor fountain is very simple and consists in organizing the circulation of the water mass in a closed cycle, which is carried out by means of a compact electric pump. In this case, the water rises to the collection point, located at a certain elevation, from where it flows or falls like a small waterfall into a special storage tank.

Back to content

Video: a small version of the stone yourself

The choice of a suitable shape and design for creating a home fountain will, of course, depend on the features of the interior of your apartment. At the same time, you can always complement the waterfall with well-thought-out lighting and unobtrusive sound accompaniment, so that it turns into a decorative element of your dreams. Home fountains should relax the hosts and decorate the room, delighting the guests. Suitable options you can search in the photo.

Back to content

Design features

The simplest DIY indoor fountain can be made from the following minimum required set of components:

• the base on which the indoor fountains are mounted (receiving tank);
• standard silicone hose;
• a mini pump from an aquarium or another pump version;
• capacity used as a source (or several to make a waterfall, as in the photo at the beginning of the article).

In addition, for the design of the composition and decoration, you will need decorative soil, expanded clay and other auxiliary materials. Home fountains need to look interesting in order to beautify the interior. Examples can be seen in the photo.

As a source, you can use a large seashell or an elegant mini jug, in which you should drill an inconspicuous hole. It will be needed to install a piece of silicone hose into the "source" through which water will be supplied to this container using a pump or pump. As a base (receiving container), you can use a regular planter for flowers.

Back to content

Assembling the structure

We begin to assemble a home fountain with our own hands by attaching a piece of silicone hose to the pump tip and placing the latter at the bottom of the receiving container. We also put expanded clay here and cover it all with a dense plastic film (preferably black), in which we cut a hole and pass a piece of hose from the pump through it.

Back to content

The film will keep the expanded clay from floating when the container is filled with water. Lay a layer of colored decorative primer on top of the film. The do-it-yourself indoor fountain is almost ready.

The source holder can be made of stones glued together with waterproof glue, before passing a hose from the pump through it. After that, you just have to thread the hose through the hole drilled earlier in the source and cut off its excess. Your waterfall, stream, pond is ready!

Similar materials

A cool, bubbling fountain on a hot summer day is very invigorating and uplifting. If there is no time or opportunity to get to a real fountain, then a small home fountain is simply salvation! Moreover, make a fountain for the house with your own hands very simple. Will help you with this my Master Class.

For a home fountain, we need:

• flower pot (no holes in the bottom) with a pallet;
• small water pump(a pump for pumping water, powered by the network, is sold in hardware stores or markets, costs 300-600 rubles, mine is 6x4.5 cm in size and 5 cm high);
• acrylic paints,
• paints for glass and ceramics,
• contours,
• spray paint;
• pebbles for the aquarium;
• plastic plants for the aquarium;
• decorative castle, again, for the aquarium.

1. Flower pot will serve as a bowl for our fountain self made ... To make it look beautiful, it must be embellished, that is, painted.

2. I chose “ mosaic". To do this, with a golden outline, I applied arbitrary line-cells to the outer side of the flower pot.

3. Then she filled the cells with acrylic paints, as well as paints on glass and ceramics (I used everything that was at hand and that does not require firing to dry).

4. I painted over with blue paint from a spray can inner part container and pallet. You need to be careful here. It is better to wrap the pot with some kind of rag so that small splashes of paint do not end up on the outside of the pot and spoil the drawing.

Alternatively, you can paint the pot and plate first with spray paint, and then start painting the outer part.

5. So, the main job is done! This is how the pallet will be installed.

6. The fountain pump will be located under the pan. In order for the water to circulate, small holes for the drain. In addition, the hose from the water pump will also need to be threaded through the hole in the sump. Since we have a plastic base, it is easy to melt the holes with a hot nail (heated, for example, on a stove).

7. Now the details. I lightly painted our water castle with paints on glass and ceramics, and pasted over the circle of the fountain with colored pebbles for the aquarium. You can, of course, come up with a different decor for your fountain handmade!

8. When everything is ready, you can collect fountain... I put the water supply pipe through the window of the ceramic lock and covered the bottom with pebbles for the aquarium.

I slightly revived the "landscape" with sprigs of artificial algae.

And now he is murmuring quietly, small, but so cute indoor fountain handmade! :)

You can find the original of this master class on the website of its author

Master class table waterfall, decorative fountain with your own hand

Reducing the humidity in the room is a side effect of heating the apartment in winter. Moreover, excessively dry air not only causes discomfort when breathing, but also causes an increase in the number of colds. The dry mucous membrane of the nasopharynx becomes more susceptible to all kinds of infections and viruses. That is why during the heating season, you should consider humidifying the air.
There are many different humidification devices on the market: evaporator, steam generator, humidifier, etc. Some owners simply put open dishes with water in the room. As you can see, there are many options, but none of them is suitable for creative people, since our imagination simply will not put up with this simple solution... After all, there is an opportunity to make a very useful and most importantly beautiful thing with your own hands. So, after thinking a little, we found a way out by offering you, dear readers, to make an indoor fountain. You can install such beauty in any convenient place: on the floor, on a table, on a stand. The decorative fountain will be an excellent interior decoration and will perfectly fit into any style solution. What's more, the murmur of water indoor waterfall creates a peaceful environment conducive to rest and relaxation.
Master class table waterfall. Do-it-yourself desktop fountain.
To make a handicraft, a desktop waterfall - a fountain, we first of all need a mini pump for (circulation of water in the fountain) to raise water from the lower reservoir to the upper reservoir. It is best to use a pump water pump, which you can simply put in the bottom reservoir (reservoir) and pump the water up. Unfortunately, we do not have such pumps on sale, therefore, in this master class, a water pump from household appliances, or rather from an electric samovar (photo below).

The reservoir of the lower reservoir is made of plastic bottle from under the oil (5L). Cut off the lower part with a height of 5-8cm.

A round cake tray with a diameter of 29-30cm is used as a base. Any shallow plastic container can be used.
Connection of the pump to the lower reservoir. Using a hot soldering iron, punch a hole in the reservoir of the lower reservoir. The hole should be 0.5mm smaller than the pump tube diameter. This is to ensure that the connection to the pump is tight to avoid leakage. If it is not possible to tightly connect the pump to the reservoir, then you can proceed as follows: put a piece of a soft hose on the pump tube and thread it through the prepared hole, which will seal the connection (see photo below).

At this step, you can check the operation of our fountain. Also check for leaks somewhere.
The above steps are only necessary if you do not have a pump pump.
Relief making. For the production of the relief, we will use construction foam. Cover the entire base with foam to a height of 5-6cm. Wait for the first layer to harden. It will take about 3-4 hours and start building up the slide (base of the waterfall) (see photo below). We gradually build up the base of the waterfall by 15-17cm.

After the foam has completely hardened (after 10-12 hours), we proceed to create a waterfall. We glue the waterfall bed with pebbles and lay out a small lake at the top. After completing the formation of the waterfall, we coat the channel well and, especially carefully, the seams between the stones with waterproof glue liquid nails (see photo above).

After the glue has dried, we check the work of our desktop fountain - a waterfall. It will not be possible to get a beautiful drop of water right away, therefore, with the help of a pistol (hot glue), we form nests 3-4, in which streams of water will form and fall down, see the photo above.
Next, we proceed to the design of the waterfall, to painting our tabletop fountain. For which we will prepare a special paint.

Pour PVA building glue diluted with water 1: 1 into the container, add color and sand. Stir and add sand until creamy. Let's prepare several shades of green and paint our craft, applying each layer after the previous one has dried.

Painting result decorative fountain in the photo above.
We start making the base (pallet) for our craft a desktop waterfall - a fountain.

Cut out a circle with a diameter of 30 cm from thick sheet cardboard, and another circle with an inner diameter of 30 cm and an outer diameter of 32 cm, strips 5 and 1.5 centimeters wide. We glue all the details as shown in the photos above.

We install our waterfall on the base and proceed to the final stage.
Between works on table waterfall, I collected a tree from sequins on a stone, photo below

We glue the tree in a previously prepared place and complete work on the desktop fountain - a waterfall, close all the flaws and minor flaws.

Now I'm ready original craft... Looking at her, you will never think that you can create such beauty with your own hands and use available materials for this. This indoor fountain will delight everyone. Isn't it an idea for a great gift ?!

It would seem that when we offered you to make a fountain for your home, we thought about humidifying the air in the room, and in the end we not only solved this problem, but also brought notes of originality and sophistication into your home.

Material taken from ourworldgame.ru