What can be cooked from squid: quick and tasty

The various designs of toolboxes considered in the article are united by the simplicity of their execution. Choose the right project and, guided by our drawings and photographs, make yourself a convenient portable storage for the tools and equipment used in work.

Simple open drawer

The good thing about this box is that the tools are in their places and are in the field of view. You can't put a lot of accessories into it, but there is a place for the main ones. An open box is useful in household use when you need to repair something outside the workshop: they reported to the box what was missing and went to work.

A wooden tool carrier is heavier than factory counterparts, so you shouldn't plan for it to be too bulky. The box will not hit your knees if you make it narrow. The high handle also adds convenience - you don't have to bend low to grab it.

Find the right pieces of plywood and pine trims. Mark and cut out the details of the box. Select the grooves in the workpieces with a hand router or make two cuts with a circular saw and clean the groove with a narrow chisel.

Box body details: 1 - wall (2 pcs.); 2 - sidewall (2 pcs.); 3 - bottom; 4 - groove along the thickness of the partition and a depth of 1 / 2-1 / 3 of the thickness of the material

Sand the surfaces and assemble a rectangular box from the blanks. Coat the ends with wood glue and fasten the parts with small nails.

Saw a central partition from 5 mm plywood, the width of which should be 1 mm less than the distance between the grooves in the walls of the box. Mark the location of the arm cutout, drill the saw entry hole, and cut the plywood with a jigsaw.

Partition drawing

Apply glue to the grooves and replace the partition.

Make two overlays for the handle from a 20x45 mm block, rounding the corners of the workpieces with a plane. Prepare holders from the rails for hand tool: in one, cut out the recesses for the pliers and pliers with a jigsaw, and in the other drill holes for screwdrivers with a drill. Using glue and screws, fix the parts to the partition, placing them at different heights.

To prevent the surfaces from getting dirty for a long time, cover the box with varnish.

Toolbox in a stool

In this upside-down stool, you can carry the tool anywhere in the house or yard, and put it on its feet, reach the shelf or hammer in a nail where your height is almost not enough.

Using plywood or OSB 10-15 mm thick, cut out the cover (pos. 1), longitudinal drawers (pos. 2) and sides (pos. 3) according to the dimensions indicated in the drawings.

Make a handle and four legs with bevels at the ends at an angle of 15 ° from bars with a section of 40x50 mm.

Assemble the stool by screwing the parts together.

Box assembly diagram: 1 - cover; 2 - king; 3 - handle; 4 - leg; 5 - sidewall

Round off the edges of the cover and the elongated cutout in it, apply a finishing coat.

Young Master's Box

If your child enjoys tinkering or repairing, make a small box with him for his favorite tools.

Take planed 16mm boards and cut out the parts according to the drawings. Prepare a round birch stick for the handle.

Drawer detail drawings: 1 - sidewall; 2 - bottom; 3 - handle; 4 - handle stand; 5 - holder

Draw lines on the sidewalls parallel to the edges of the lines corresponding to the positions of the handle posts, drill through holes between them for screws.

Remove the burrs with sandpaper and start assembling the box. First connect the bottom and sides with glue and screws, then install the handle post along the marking lines.

Now replace the second post while simultaneously inserting the handle into the blind holes. Screw on the screwdriver holders.

Paint the box the color your child chooses.

Wooden box with lid

The required set of tools differs depending on the hobby or profession, respectively, and internal organization the box can be different. The next version of the tool carrier is suitable for any equipment, it is distinguished by its solidity and reliability.

Use light wood for the box: pine, linden or poplar. The optimal thickness of planed boards is 12 mm, thinner ones are more difficult to fasten, and thicker ones will increase the weight of the structure.

Required fittings:

A pen.
Corners - 8 pcs.
Latch - 2 pcs.
Loop - 2 pcs.

Mark the lumber according to the drawings and cut the blanks.

Cut out blanks for the box

Table. Parts List

Make sure the cut is correct by folding a box from the blanks. Sand all parts one by one sandpaper No. 220 and label them. Assemble the bottom part and the cover of the box, using the clamps to fix the blanks, corner clamps or mounting angles. Coat both mating surfaces with wood glue.

Drill the pilot holes for the screws and make a countersink for the caps, and after fastening the parts, wipe off the excess glue with a rag.

Fasten the blanks of the body of the transfer part. Replace the dividing walls by screwing them in from the sides and bottom.

Screw the carrying handle down the middle.

Install the support rails inside the drawer 30 mm from the top.

Use a fine sandpaper to clean the pencil marks and burrs around the screws, and blow off any dust from the surface.

Cover the drawer with a layer of polyurethane varnish, after drying, remove the raised nap with "zero" and repeat the finishing.

Align the hinges with the gap between the body and the lid of the drawer. Mark and make pilot holes for screws 10 mm deep, fix the hinges.

Screw on the corner pieces using the small screws.

Place the handle and latches on the cover.

Fill the finished box with the tool.

If desired, place containers with dividers or cassettes for storing small items in the large compartment of the drawer.

If you decide to add partitions inside the box, make them removable so that you can change the free space for a new tool.

Every man agrees that a high-quality and multifunctional toolbox is an almost irreplaceable thing in the household. Many craftsmen prefer to buy a ready-made box in the nearest store, where a wide assortment is presented. But such an adaptation can be made independently, in accordance with personal wishes. Moreover, the manufacturing process itself is not considered difficult, thanks to which even a beginner can cope with this task.

Classification of tool boxes

There are several main criteria due to which multifunctional products can be divided into several main groups.

According to the material from which the body is made:

By type of stored instruments:

Construction of modern boxes

Speaking about the design of such boxes, we do not mean their shape, but the way of opening and the presence of auxiliary sections. The following designs are considered standard today:

Making a box from plywood

To make a do-it-yourself toolbox out of plywood, you will need the following tools and materials:

Before you start manufacturing, you need to carefully work out the project of the future product (the drawing can be done on a computer or on plain paper). The necessary calculations are made, the main dimensions are fixed. After that all marks must be transferred to a sheet of plywood... This can be done using a regular ruler, tape measure, marker, or even a pencil. All blanks for the future box are cut along the outlined lines. And also it is necessary to mark all the grooves and cut them out on the blanks. Irregularities formed in the process of work can be processed with a chisel. It is thanks to the grooves that the final design of the box will turn out to be stronger and more durable.

The next stage is the assembly of the entire structure. Use good quality wood glue to glue small parts together. The main sides of the box are also glued together. To improve the result, they need to be pressed tightly against each other. It is best to use a special rubber strip for this. You cannot remove it until the glue is completely dry. On the doors, you need to round off the corners.

Convenient handle for boxing with tools can be made of MDF. Initially, the layout is drawn directly on the wood and only then is it cut out. When the handle is ready, the surface must be finished. It is fastened with wood glue and screws.... If you do not want to make a handle yourself, then you can purchase it at a hardware store. The main criterion the right choice- high strength and reliability. Now you need to attach the outer drawer cover and doors. All the details are applied to their places, and then the areas for attaching the loops are marked with a pencil.

To organize the order in the box, you can make small compartments. All component parts are cut according to the same principle as the box. Grooves are made and glued. On one side of the box, you can make a special compartment for storing screwdrivers. The most convenient option is considered to be where this function is performed by special inserts with slots made of plywood. Velcro is attached to the other side of the drawer to store cables and extension cords.

Wooden box manufacturing technology

It is this option that is considered a classic in joinery. Drawings of this portable vault were printed in magazines 50 years ago. For the manufacture of you will need a high-quality board with a thickness of 10 to 20 mm, as well as a hacksaw for wood. Due to the simple manufacturing technology, many craftsmen still choose this option.

In the classic design, there are no separate compartments or special multifunctional fixtures. The final product will look like a neat deep box with a comfortable handle along its entire length. This shape of the handle has practical purpose... After all, if the weight of the tools used is unevenly distributed, then you can always find the center of gravity point.

A practical addition is the insert section with its own handle, the height of which takes up 50% of the entire drawer. This box can be used for small tools (awl, screwdrivers, small keys), as well as consumables (bits for screwdrivers, electrical tape, drills). Any type of wood can be used to make it.

Universal case made of plastic canister

If you want to make a toolbox with your own hands, but there is no plywood sheet, then you can use a regular plastic canister. For work you will need:

Hacksaw.
Plastic containers.
Fasteners.

The used canister must be rectangular with a comfortable handle, which must be centered. In addition, it must be equipped with a screw cap to be used as a lock.

The process of making the box itself is quite simple. Using a hacksaw, you need to make cuts in the canister. The first cut must fall on the center of the neck and the container handle, it is best to remove the plug, and cut through the top wall. The second cut is carried out exclusively in the horizontal direction. It is best if it is located at the top of the canister, on the end sides. The plastic container itself must be cut from the top wall at a distance of 4 cm, and on the sides by 3 cm.

When all the cuts have been made, the canister can be opened. To do this, bend all the side parts of the upper cover with the halves of the handle. In such a box you can store various materials for fasteners: nails, bolts, screws, nuts. The top must be closed by folding the handles together. Such a device is fixed with a screw cap.

To make the box as strong as possible, additional gaps must be made on the end walls... Small holes are drilled in the lid itself or in the walls, into which hooks are inserted, as well as bolts with nuts.

Metal box for instruments

This option is best suited for experienced locksmiths who have necessary equipment and material. Factory metal tool boxes are made from light metals such as aluminum. As a result, the product is as light and durable as possible. But at home, working with aluminum is much more difficult.

Even a beginner can make this version of a metal box. After all, the most ordinary box and special partitions will be made of metal. Initially, you need to prepare the base material - galvanized steel (0.4 mm thick). From the tools you need to prepare:

Marking vernier caliper.
The square is metal.
Ruler.
Hammer.
Pliers.
File.
Sharpened core or marker.
Anvil.

Next, a drawing and markup are made. You need to mark only those places that will need to be deleted later. Now you can start trimming with metal scissors. After trimming all that is superfluous, you should get a kind of geometric figure (winged rectangle).

Next, you need to use an anvil. By tapping with a hammer, gradually bend the edges of the workpiece. It is better not to work in a chaotic manner, all actions should be consistent. First, one sidewall is folded, and then another. Pliers are used to wrap protruding parts.

After these manipulations, you need to walk with a hammer over the entire structure to align it. In this case, you will get a small metal box for storing tools. In the future, you can experiment not only with the size, but also with the shapes of such boxes.

Almost every home has some kind of tools. When there are too many of them, you can make your own multifunctional storage box. Experienced craftsmen believe that it is such a box that is considered an integral attribute for storing various devices. Such boxes can be stored in the workshop and even taken with you on a long journey.

There are many professions in which different kinds tools. Most often, tool boxes are purchased for their storage, but sometimes high-quality storage is easier to do with your own hands.

If you are interested in this or that kind of craft, and you do not sit at home with folded hands, naturally, you have a fairly large number of tools. To ensure that your tools are always at hand and safely stored, they need to provide a security system in the form of a separate closed space called a drawer. for storing tools. In addition to safety, the use of such a box will greatly help in the work, since the filling will be neatly sorted into compartments and in the future you can find the necessary device “blindly”. This device is also needed by car owners, or rather owners of trucks and gazelles. The box must be well secured in the car. And this means that when making it with your own hands, you need to think carefully about where it will be in the car and how to fix it there.

Decide on two criteria:

Will you only store tools in it, or do you need it for ease of transportation?
what sizes of tools do you intend to store in it?

Classification of boxes

By body material:

plastic - light in weight, convenient in everyday life and for transportation;
metal - much heavier than plastic, but at the same time much stronger, more stable, have a more rigid structure, cannot be large due to the weight of the metal;
galvanized metal-plastic - lightweight, durable and spacious, suitable for both storage and transportation of professional tools. But all these advantages determine the corresponding price - it can range from $ 150 to $ 500 and more.
wooden - the most affordable material for making a toolbox. Moreover, it is easier to do it with your own hands from this material, or rather from plywood 10 16 or 18 mm.

By type of stored instruments:

hand tools - as a rule, they are represented by one large compartment for large tools (screwdrivers, hammers, keys) and 2-3 small ones for smaller tools;

an electric tool is a case functionally designed to store and move a specific power tool. Most often it has one main compartment for the device itself and several recesses for equipment.
organizers - boxes designed to accommodate a large number of tools of various sizes. They have many compartments, models with modular partitions deserve attention, which for the convenience of the owner can be rearranged from one place to another.
professional tool - special kind cases with specific seats for specific instruments, more resistant to drops and harsh environmental conditions.
non-professional tool - represents boxes of both small and fairly large sizes with many compartments, and niches for various kinds of tools, often these are cases in the form of bags.

There are many companies for the production of tool boxes, such as stanley, fit– American firms, keter- no less popular Israeli company, Spanish company tayg, german Kroft and many others, differing in quality and price of products.

As an alternative to all these firms - the ability to make a tool box with your own hands. Thus, you can save on cost and get a completely competitive option that meets your exact requirements.

Types of boxes

Homemade toolboxes are mostly made of wood and come in a variety of shapes. Popular and easy to manufacture boxes of the classic form - "basket". on the second and third place - a box in the form of a chest - a container, and in the form of a case.

Materials for making a tool box

wooden boards 15-25 mm thick
round wooden rod the desired length
self-tapping screws, wood glue, sandpaper for cleaning surfaces
set of tools - grinder, electric drill, jigsaw, screwdriver
measuring tools - ruler
screwdriver, hammer

Manufacturing steps

Using this technology, it is possible to make boxes of more complex designs, creating the required number of compartments and niches due to partitions.

Using the same technology, it is possible to manufacture a closed box, which is more reliable and convenient for transporting tools.

Additional steps in the manufacture of a box with a lid

For self-made popular now boxes-transformers you will have to smash your head more, but it is quite possible to implement this idea.

To do this, using computer programs, you need to develop the design you want, but a set of necessary elements that can be purchased in special stores will help you to translate it into reality. The number and complexity of the selected elements depends on your requirements for the box. The assembly can be done on a wooden base using aluminum strips and corners. Fasteners are made with rivets.

If you are a purposeful and creative person, then the process making tool box will not be difficult, but seeing the fruits of this work, you will increase your self-esteem and save budget funds.

Types of convenient boxes
Material selection
A box that looks like a stool
Small portable version

The master always has his own instrument at hand. It allows him to quickly cope with the assigned tasks. There are never too many tools. Sooner or later, there are so many of them that no pockets are enough to lay out all the screwdrivers and rulers. We need a box. They cannot be kept in disorder. Impacts, friction - drills become dull and fail quickly. In the process of work, there is not always time to look for the right screwdriver, so the space of the spacious wooden storage should be used, and the entire volume is divided into separate compartments.

The easiest way is to buy a container made of plastic or iron. Inside the finished models, the storage space for tools has already been thought out in advance, divided into several compartments. But homemade box assembled for each specific master, taking into account storage locations for tools, consumables and fasteners. Some will fit the simplest models, others will need a multifunctional carrying case. It makes sense to find out what types of portable storage there are to choose suitable model, and then construct one with your own hands.

Types of convenient boxes

According to the form of manufacture and purpose, tool boxes are classified:

Portable.
Stationary.
Special.

Portable containers for carpentry tools are compact models, inside which a small amount of things you need to work are placed. The complete set of the case depends on the specialization of the master. Its design assumes a strong lock that will not open during long-term transportation. The portable box is constantly in motion, so it is important that several types of fasteners, convenient niches, in which you can, for example, lay screwdrivers and fasten them, so that they do not dangle or knock, are thought out inside it.

It is rather difficult to make a stationary tool box with your own hands. And all because its design is much more complicated than that of a portable one. Inside, you do not need to think over the arrangement of fasteners. The main thing is to form certain compartments and divide them into groups.

A special case is made for strictly individual needs... It can, for example, store only drill bits or spanners different sizes. Such a box for small tools is more convenient than universal storage. To complete the work, sometimes the master needs to take several special cases with him at once. Before you start making storage, you need to decide which of the options is most suitable for the job.

For this you need:

make an inventory of the tools available;
sort them into groups;
distribute by size.

Then it will immediately become clear which drawer is best for tools. There are several instructions in the article to help you fix this problem. First, it is important to choose the material that will be easiest to work with.

Material selection

The hardest thing to make is a metal toolbox. For a portable design, such material will not work - the case will turn out to be too heavy. For stationary models that will store iron keys or heavy components, it will do. During work, you will need welding. If you have the skills and ability to use it, you can try. If they are not there, plywood with a thickness of 8–10 mm can replace the metal.

It only looks fragile, but it is a very durable material. The parts are fastened together with screws and additionally coated with PVA glue, as they will quickly loosen. For the construction of the frame, it is better to use hardwood bars. The walls of the case must be thicker - at least 10 mm. Boxes with cells for carpentry tools are best made of plywood with a thickness of 8 mm.

The mobility of stationary plywood boxes will noticeably increase if you attach rollers to the bottom, which can be bought at a furniture store.

Boxes for various tools made of wood are a carpentry classic. This material allows you to create any models with your own hands.

Small tool storage case

If you need to have a set of small tools on hand, you can get by with a simple drawer with a handle. The manufacturing process must be divided into several stages:

The first stage is planning, making general calculations, drawing. It should display the order of subsequent actions. The drawing is drawn up independently, or you can use computer programs.
The second stage is the preparation of the necessary building materials... These are wooden sheets 10-15 mm thick, nails, fasteners. For work you may need measuring instruments, hacksaw and hammer.
The third stage is manufacturing. Using the instructions, you can assemble a simple open toolbox with your own hands (photo).

Before starting work, you need to make a drawing.

Number 1 - the walls of the box (two pieces).
Number 2 - sidewalls (two pieces).
Number 3 - the bottom of the box.
Number 4 - groove made along the thickness of the partition. Its depth should be equal to one third of the thickness of the plywood.

All parts with a hacksaw are cut out of plywood blanks... Then the edges of the workpieces are ground with sandpaper. A box is assembled from the largest parts, its sides are coated with PVA glue, then they are additionally fastened with small nails (it makes no sense to use a bolt fastening here). The handle-holder (it is also the partition) is made according to the following scheme:

Plywood is selected with a thickness of 5 mm. The hole for the handle is cut out with a jigsaw. The workpiece is inserted into the grooves made, which are pre-coated with PVA glue. To prevent the handle from cutting the hand, it is necessary to take a block with a section of 20x45 mm. The edges of the bar are rounded with a plane. A slot is made across the entire width, into which the plywood blank is simply inserted. In the end, it should look like this.

Along the edges of the plywood handle (you can clearly see this in the photo), wooden slats are attached, in which holders were previously made for pliers, pliers, wrenches or screwdrivers. The toolbox is ready. To prevent it from getting dirty, you need to paint it in several layers with wood varnish.

Using the same plywood, you can make a large box with your own hands, which, with a slight movement, turns into a stable stool. It was invented by craftsmen working with carpentry tools. You can take such a drawing as a basis.

For these parts, you need to make four legs with dimensions of 375x50, with bevels at the ends, made at an angle of 15 degrees. And also a handle 660 mm long and 40 mm wide. Along the edges - the same bevel. And here is a visual plan for its assembly.

The stool is assembled according to the proposed scheme, the parts are fastened with screws 4.5x60 mm, and not with self-tapping screws. At the final stage, we get such a box. Do it yourself - simple, as a result - a multifunctional storage for tools. If you turn it over, you get a stable stool.

Small portable version

There is the easiest way to make a box that will work for the average homeowner. Outwardly, it will look like in the photo.

A detailed drawing is attached to the model:

Number 1 stands for the side, number 2 for the bottom of the wooden box, number 4 for the handle post. The handle itself is a block measuring 382 x 30 mm. Another detail is the holder - a rectangle 118 mm wide and 55 mm long. You need to make three identical holes in the holder. For this, a drill is used. The assembly of a large drawer begins by connecting the bottom and side, then the handle stand is mounted. The photo shows all the stages of the upcoming work.

Then the second post is installed, and at the same time the park-holder is inserted into the blind holes. Then fasteners for screwdrivers are mounted. Here's what you should end up with.

A large and convenient box for tools is the dream of any craftsman. It is understandable, because in such a repository you can compactly pack all your tools. They are not so expensive today, so one of the options is to purchase in a store or create a similar masterpiece yourself. Which option would be acceptable for you? Of course, the purchased one has a certain size, but there may be much more tools than can fit into it. But one way or another, you have to put up with it or again run to the store and buy a new one. It is quite another matter to do it yourself: I selected the necessary material and calculated it for all the available tools and even with a perspective. Comfortable? You will most likely agree with this argument. Therefore, in this article, let's talk about how to make such a box yourself at home.

What should HE be?

If this is a home box, then it can be a regular box with a handle. Well, if you are, for example, a plumber, then it is clear that you need a box that is more functional, roomy and durable. This role will be successfully performed by the organizer. However, in this article, as an example, consider a simple home option- a box with a handle. So, we will assume that we have decided on the type of box where we will keep all the tools we need, or almost everything.

Where do we start? First, let's pick up the material. It can be plywood, wood or even metal, then we will make calculations. Only then can you start drawing up a detailed drawing. This can be done in the classical way, that is, on a Whatman paper using a well-sharpened pencil, ruler, compass, square, etc.

The non-classical way is with the help of a special computer program. "AutoCAD" and "Compass" are just "sharpened" to make a professional accurate drawing. The advantage of such programs is that they will help to avoid errors in the calculation and, moreover, it is possible to see in advance what you will get out of all this.

These programs will only serve you well if you have the skills to work with them.

The material was selected, and now for manufacturing it remains to collect all the tools that we will need. Of course, the types of tools are individual. It all depends on what kind of box you want. They are also different. But, one way or another, there are universal tools. They are always needed. This is a measuring tool:

fasteners;
hammer;
screwdriver.

We start manufacturing

We take traditional material - edged board conifers. As for processing, this is the simplest and most affordable material, which, moreover, has good strength properties.

As planned, it will be wooden box, and our task now is to materialize the drawing itself into a material. For this business we need a ruler and a pencil. After that, we carry out the marking on the material and cut out the component parts of the product with a hacksaw or jigsaw. If we planned the usual non-closing option, then we need to make five planes: four walls and a bottom.

When assembling, it is generally best to use wood glue. The joints must be cleaned, and only then apply glue, after which we firmly squeeze the parts together. Be sure to let the glue dry completely.

After this operation, we can additionally strengthen the box with fasteners - self-tapping screws. They fixed it. Now you need to make a handle. This can be a regular wooden strip that we need to nail or screw to the top edges of the side elements.

Organizer

Following the principle "from simple to complex", now let's talk about the organizer. It is clear that in the open-top box, which was described above, you can put a large tool: hand hacksaw, hammer, mallet and much, much more.

And what to do with small things? All sorts of screws, bolts, nuts, etc. This small fastener tends to get lost or not be at the very moment when it is especially needed. This is where we need an organizer.

As already noted, this type of boxes by their design is the most functional in operation. What is he like? It's kind of like a box on a box, or rather, a lot of drawers in one section for storing not only medium-sized tools, but also every little thing. Of course, at first glance, it may seem that it will not be easy to manufacture such a structure. But it only seems to be. Basically, difficulties arise in the manufacture of a sliding mechanism. Everything else is much easier to do. Now in more detail about the manufacturing technology.

We start by making the main body. It must be open and deep so that we can place various medium-sized tools (hammers, wrenches, etc.) in it. We can say that the design of this main body is quite simple, but in essence it is an ordinary box, which can be divided into several sections using vertical planes.
The next stage is the production of 4 smaller boxes. You've probably noticed that the number of these sections is even, and we mentally divide them into pairs, trying to adhere to the size of their lower big brother when manufacturing. They will be stacked on top of each other. One pair of boxes (top) will be with lids. They will be either folding on piano hinges, or retractable like a Soviet school pencil case.
Now it remains to connect these boxes to each other. We will do this using metal connecting strips. We need 6 pieces. On the one hand, as well as on the other, we hook on one plate (short) to connect the two lower boxes - small and large. Two more plates (long) will connect all the boxes to each other. And, finally, the longest bar will act as a handle, and at the same time connect the two upper floors of the organizer. As you can see, there is nothing complicated here, and the sliding mechanism is extremely simplified, as shown by the example of a metal organizer - the principle is the same.

Making a metal case for tools

Let's talk now about the metal case homemade... Don't immediately jump to the conclusion that this is impossible. Of course, only an experienced locksmith can make an organizer out of metal on his own and with the presence of special tools and the appropriate material. Factory-made metal boxes are usually made of light metals such as aluminum so that the box itself is not heavy. It is difficult to work with aluminum at home.

In principle, a metal box for - it says loudly. More likely, an ordinary box will be made of metal. The material that will be needed for the manufacture of such a box is the usual soft zinc plating (about 0.3 mm thick). From the tools we need:

square;
caliper (marking);
sharpened small core or marker;
ruler;
hammer;
anvil (wide metal bar);
file;
pliers.

Then everything follows the same scenario: drawing, markup. The most interesting thing is that all this can be done directly on the galvanized sheet using a sharpened core (or marker), whatever you like. We then mark with a marker on the metal those places that we will have to delete.

After that, we start trimming using metal scissors.

After trimming all that is superfluous, we get such a complex geometric figure ("winged rectangle").

Now let's do a little blacksmithing. For this case, we have an anvil, and, tapping with a hammer, we will gently bend the edges of our workpiece. It is better to do this not chaotically, but in a certain order.

First, bend one side, and then bend the other.

Now the sides are in turn.

After that, we will bend the protruding petals. They will make the structure itself more rigid, and it will not "play".

Pliers can be used to wrap protruding parts on top of the box.

After such manipulations, you should thoroughly walk around the entire product with a hammer, aligning it.

In this case, it turned out to be a small box. But after all, according to this principle, you can make a similar one - more, and in the end you get such a metal box for the tool.

So, if you wish, anything is possible.

We hope that this article will be useful for you, dear readers. If your tools are in order, then supplement it with the manufacture of a regular tool box. If your tools do not have a permanent "place of residence", then think about building a two- or even three-story "transforming house" for it. Try to do this, and your tool will always be in place, and you yourself will be pleased to use a product made by yourself in your household.

Video

This video shows how you can make a toolbox from scrap materials:

See how you can make organizer cases for the tool yourself: