What can be cooked from squid: quick and tasty

Length and Distance Converter Mass Converter Bulk and Food Volume Converter Area Converter Culinary Recipe Volume and Units Converter Temperature Converter Pressure, Stress, Young's Modulus Converter Energy and Work Converter Power Converter Force Converter Time Converter Linear Velocity Converter Flat Angle Converter thermal efficiency and fuel efficiency Converter of numbers in various numeral systems Converter of units of measurement of information Quantity Rates Sizes women's clothing and footwear Sizes of men's clothing and footwear Angular velocity and rotational speed converter Acceleration converter Angular acceleration converter Density converter Specific volume converter Moment of inertia converter Torque force torque converter Specific heat of combustion (mass) converter Energy density and heat of combustion (by mass) converter Thermal Expansion Converter Thermal Expansion Coefficient Converter Thermal Resistance Converter Thermal Conductivity Converter Specific Heat Capacity Converter Thermal Exposure and Radiation Power Converter Heat Flux Density Converter Heat Transfer Coefficient Converter Volumetric Flow Rate Converter Mass Flow Rate Converter Molar Flow Rate Converter Mass Flux Density Concentration Molar Converter concentration in solution Dynamic (absolute) viscosity converter Kinematic viscosity converter Surface tension converter Vapor Permeability Converter Water Vapor Flux Density Converter Sound Level Converter Microphone Sensitivity Converter Level Converter sound pressure(SPL) Sound pressure level converter with selectable reference pressure Luminance converter Luminous intensity converter Luminance converter Resolution to resolution converter computer graphics Frequency and Wavelength Converter Optical Power in Diopters and Focal Length Optical Power in Diopters and Lens Magnification (×) Electric Charge Converter Linear Charge Density Converter Surface Charge Density Converter Bulk Charge Density Converter Converter electric current Linear Current Density Converter Surface Current Density Electric Field Strength Converter Electrostatic Potential and Voltage Converter Electrical Resistance Converter Electrical Resistivity Converter Electrical Conductivity Converter Electrical Conductivity Converter Electrical Capacitance Inductance Converter American Wire Gauge Converter Levels in dBm (dBm or dBmW), dBV ( dBV), watts and other units Magnetomotive force converter Magnetic field strength converter Magnetic flux converter Magnetic induction converter Radiation. Ionizing Radiation Absorbed Dose Rate Converter Radioactivity. Radioactive Decay Radiation Converter. Exposure Dose Converter Radiation. Absorbed Dose Converter Decimal Prefix Converter Data Transfer Typography and Image Processing Unit Converter Timber Volume Unit Converter Molar Mass Calculation Periodic Table chemical elements D. I. Mendeleeva

1 millimeter [mm] = 0.1 centimeter [cm]

Initial value

Converted value

meter exameter petameter terameter gigameter megameter kilometer hectometer decameter decimeter centimeter millimeter micrometer micron nanometer picometer femtometer attometer megaparsec kiloparsec parsec light-year astronomical unit league maritime league (MU) nautical league (international) mile (mile) (statutory international) mile. (international) mile (statutory) mile (US geodetic) mile (roman) 1000 yards furlong furlong (US geodesic) chain chain (US geodetic) rope genus genus (US geodesic) pepper pol pole) fathom, fathom fathom (US, geodesic) elbow yard foot foot (US, geodesic) link link (US, geodesic) elbow (UK) hand span finger nail inch (US, geodesic) barley grain (eng. barleycorn) thousandth microinch angstrom atomic length unit x-unit fermi arpan soldering typographic point twip elbow (swedish) fathom (swedish) caliber centiinch ken arshin actus (dr. Rome) vara de tarea vara conu quera vara castellana elbow (Greek) long reed reed long elbow palm "finger" Planck length classical electron radius Bohr radius equatorial radius of the Earth polar radius of the Earth distance from Earth to the Sun radius of the Sun light nanosecond light microsecond light millisecond light second light hour light day light week Billion light years Distance from Earth to the Moon cable (international) cable (British) cable (USA) nautical mile (USA) light minute rack unit horizontal step cicero pixel line inch (Russian) inches span foot fathom oblique fathom verst boundary verst

Feet and inches to meters and back converter

foot inch

More about length and distance

General information

Length is the longest measurement of the body. In 3D space, length is usually measured horizontally.

Distance is a value that determines how far two bodies are from each other.

Distance and length measurement

Distance and length units

In SI, length is measured in meters. Derived quantities such as kilometer (1000 meters) and centimeter (1/100 meter) are also commonly used in the metric system. In countries that do not use the metric system, such as the United States and the United Kingdom, units such as inches, feet and miles are used.

Distance in physics and biology

In biology and physics, lengths are often measured much less than one millimeter. For this, a special value is adopted, a micrometer. One micrometer is equal to 1 × 10⁻⁶ meters. In biology, micrometers measure the size of microorganisms and cells, and in physics, the length of infrared electromagnetic radiation. The micrometer is also called the micron and is sometimes, especially in the English-language literature, denoted by the Greek letter µ. Other derivatives of the meter are also widely used: nanometers (1 × 10⁻⁹ meters), picometers (1 × 10⁻¹² meters), femtometers (1 × 10⁻¹⁵ meters and attometers (1 × 10⁻¹⁸ meters).

Navigation distance

In shipping, nautical miles are used. One nautical mile is equal to 1852 meters. It was originally measured as an arc of one minute along the meridian, that is, 1 / (60 × 180) meridian. This made it easier to calculate latitude, since 60 nautical miles equals one degree of latitude. When distance is measured in nautical miles, speed is often measured in nautical knots. One nautical knot equals the speed of one nautical mile per hour.

Distance in astronomy

In astronomy, long distances are measured, so special quantities are adopted to facilitate calculations.

Astronomical unit(a. e., au) is equal to 149,597,870,700 meters. The magnitude of one astronomical unit is a constant, that is, a constant value. It is generally accepted that the Earth is at a distance of one astronomical unit from the Sun.

Light year is equal to 10,000,000,000,000 or 10¹³ kilometers. This is the distance that light travels in a vacuum in one Julian year. This value is used in popular science literature more often than in physics and astronomy.

Parsec is approximately equal to 30,856,775,814,671,900 meters or approximately 3.09 × 10¹³ kilometers. One parsec is the distance from the Sun to another astronomical object, such as a planet, star, moon, or asteroid, at an angle of one arc second. One arc second is 1/3600 of a degree, or approximately 4.8481368 mrad in radians. Parsec can be calculated using parallax - the effect of a visible change in body position, depending on the point of view. During measurements, a segment E1A2 (in the illustration) is laid from the Earth (point E1) to a star or other astronomical object (point A2). Six months later, when the Sun is on the other side of the Earth, a new segment E2A1 is laid from the new position of the Earth (point E2) to a new position in space of the same astronomical object (point A1). In this case, the Sun will be at the intersection of these two segments, at point S. The length of each of the segments E1S and E2S is equal to one astronomical unit. If we postpone a segment through point S, perpendicular to E1E2, it will pass through the point of intersection of segments E1A2 and E2A1, I. The distance from the Sun to point I is segment SI, it is equal to one parsec when the angle between segments A1I and A2I is two arc seconds.

On the image:

A1, A2: apparent position of the star
E1, E2: Earth position
S: position of the sun
I: intersection point
IS = 1 parsec
∠P or ∠XIA2: parallax angle
∠P = 1 arc second

Other units

League is an obsolete unit of length previously used in many countries. It is still used in some places, such as the Yucatan Peninsula and rural Mexico. This is the distance that a person travels in an hour. Nautical League - three nautical miles, approximately 5.6 kilometers. Lie is a unit roughly equal to the league. V English language both leagues and leagues are called the same, league. In literature, le is sometimes found in the titles of books, such as "20,000 Leagues Under the Sea" - the famous novel by Jules Verne.

Elbow- the old value, equal to the distance from the tip of the middle finger to the elbow. This value was widespread in the ancient world, in the Middle Ages, and until modern times.

Yard used in British imperial system measures and is equal to three feet or 0.9144 meters. In some countries, such as Canada, where the metric system is adopted, yards are used to measure the fabric and length of swimming pools and sports fields and grounds such as golf and soccer.

Definition of meter

The definition of the meter has changed several times. Initially, the meter was defined as 1 / 10,000,000 of the distance from North Pole to the equator. Later, the meter was equal to the length of the platinum-iridium standard. Later, the meter was equated to the wavelength of the orange line of the electromagnetic spectrum of the krypton atom ⁸⁶Kr in vacuum, multiplied by 1,650,763.73. Today, the meter is defined as the distance traveled by light in a vacuum in 1/299 792 458 seconds.

Calculations

In geometry, the distance between two points, A and B, with coordinates A (x₁, y₁) and B (x₂, y₂) is calculated by the formula:

Post a question to TCTerms and you will receive an answer within a few minutes.

Calculations for converting units in the converter " Length and Distance Converter»Are performed using the unitconversion.org functions.

Length and Distance Converter Mass Converter Bulk and Food Volume Converter Area Converter Culinary Recipe Volume and Units Converter Temperature Converter Pressure, Stress, Young's Modulus Converter Energy and Work Converter Power Converter Force Converter Time Converter Linear Velocity Converter Flat Angle Converter Thermal Efficiency and Fuel Efficiency Numeric Conversion Systems Converter of Information Measurement Systems Currency Rates Women's Clothing and Shoes Sizes Men's Clothing and Shoes Sizes Angular Velocity and Rotational Speed Converter Acceleration Converter Angular Acceleration Converter Density Converter Specific Volume Converter Moment of Inertia Converter Moment of Force Torque converter Specific calorific value (mass) converter Energy density and specific calorific value (volume) converter Temperature difference converter Coefficient converter Thermal Expansion Curve Thermal Resistance Converter Thermal Conductivity Converter Specific Heat Capacity Converter Thermal Exposure and Radiation Power Converter Heat Flux Density Converter Heat Transfer Coefficient Converter Volumetric Flow Rate Converter Mass Flow Rate Converter Molar Flow Rate Converter Mass Flux Density Converter Molar Concentration Converter Mass Concentration in Solution Converter absolute) viscosity Kinematic viscosity converter Surface tension converter Vapor permeability converter Water vapor flux density converter Sound level converter Microphone sensitivity converter Sound pressure level (SPL) converter Sound pressure level converter with selectable reference pressure Luminance converter Luminous intensity converter Illumination converter Computer graphics resolution converter Frequency and Wavelength Converter Optical Power in Diopters and Focal distance Diopter power and lens magnification (×) Electric charge converter Linear charge density converter Surface charge density converter Bulk charge density converter Electric current linear current density converter Surface current density converter Electric field strength converter Electrostatic potential and voltage converter Electrostatic potential and voltage converter Electrical resistance converter Converter electrical resistivity Electrical conductivity converter Electrical conductivity converter Electrical capacitance Inductance converter American wire gauge converter Levels in dBm (dBm or dBmW), dBV (dBV), watts, etc. units Magnetomotive force converter Magnetic field strength converter Magnetic flux converter Magnetic induction converter Radiation. Ionizing Radiation Absorbed Dose Rate Converter Radioactivity. Radioactive Decay Radiation Converter. Exposure Dose Converter Radiation. Absorbed Dose Converter Decimal Prefix Converter Data Transfer Typography and Image Processing Unit Converter Timber Volume Unit Converter Calculating Molar Mass Periodic Table of Chemical Elements D. I. Mendeleev

1 millimeter [mm] = 0.1 centimeter [cm]

Initial value

Converted value

twip meter centimeter millimeter character (X) character (Y) pixel (X) pixel (Y) inch soldering (computer) soldering (typographical) item NIS / PostScript item (computer) item (typographical) middle dash cicero em dash item Didot

Learn more about the units used in typography and processing digital images

General information

Typography is studying the reproduction of text on a page and the use of size, typeface, color, and other external attributes to make text better read and look beautiful. Typography appeared in the middle of the 15th century, with the advent of printing presses. The position of the text on the page affects our perception - the better it is positioned, the more likely the reader will understand and remember what is written in the text. Poor typography, on the other hand, makes text hard to read.

Headsets are classified into different types, for example, serif and sans serif fonts. Serifs are a decorative element of type, but in some cases they make the text easier to read, although sometimes the opposite is true. The first letter (in light blue) in the image is in Bodoni serif. One of the four serifs is outlined in red. The second letter (yellow) is in Futura sans serif font.

There are many classifications of fonts, for example, according to the time they were created, or the style that was popular at a particular time. So, there are fonts old style- the group that includes the oldest fonts; newer fonts transitional style; modern fonts created after transitional fonts and before the 1820s; and finally new style fonts or modernized old fonts, that is, fonts made according to the old pattern at a later time. This classification is mainly used for serif fonts. There are other classifications based on appearance fonts, such as line weight, contrast between thin and thick lines, and serifs. The Russian press has its own classifications. For example, the GOST classification groups fonts according to the presence and absence of serifs, thickening in serifs, smooth transition from the main line to serif, rounding of serifs, and so on. In the classifications of Russian, as well as other Cyrillic fonts, there is often a category for Old Slavonic fonts.

The main task of typography is by adjusting the size of letters and choosing suitable fonts, placing the text on the page so that it is readable and looks beautiful. There are a number of systems for determining font size. In some cases, the same letter size in typographic units, if printed in different typefaces, does not mean the same letter size in centimeters or inches. This situation is described in more detail below. Despite this inconvenience, the current font size helps designers arrange text neatly and beautifully on the page. This is especially important in layout.

In layout, you need to know not only the size of the text, but also the height and width of digital images in order to place them on the page. Size can be expressed in centimeters or inches, but there is also a unit specifically designed to measure the size of images - pixels. A pixel is a point (or square) element of an image that makes up a pixel.

Definition of units

The size of letters in typography is denoted by the word "size". There are several systems for measuring point size, but most are unit-based. "soldering" in American and English system measurements (English pica), or "cicero" in the European system of measurement. The name "ration" is sometimes written as "lance". There are several types of soldering, which differ slightly in size, therefore, when using soldering, it is worth remembering which kind of soldering is meant. Initially, cicero was used in the domestic press, but now soldering is also often found. Cicero and computer soldering are similar in size but not equal. Sometimes cicero or soldering is used directly for measurement, for example, to determine the size of margins or columns. More often, especially for measuring text, they use derived units obtained from soldering, such as typographic points. Solder size is defined differently from system to system, as described below.

The letters are measured as shown in the illustration:

Other units

Although computer soldering is gradually replacing other units, and possibly replacing the more familiar cicero, other units are also used along with it. One of these units is American soldering It is equal to 0.166 inches or 2.9 millimeters. There is also typographic soldering... It is equal to the American one.

In some domestic printing houses and in the literature on printing, they still use pica- a unit that was widely used in Europe (with the exception of England) before the advent of computer soldering. One cicero is equal to 1/6 of a French inch. The French inch is slightly different from the modern inch. In modern units, one cicero is equal to 4.512 millimeters or 0.177 inches. This value is almost equal to computer rations. One cicero is 1.06 computer rations.

Round spacing (em) and semicircular spacing (en)

The units described above determine the height of letters, but there are also units that indicate the width of letters and symbols. Round and semicircular spacing are just such units. The first is also known as the pin space or em, from the English letter M. Its width has historically been equal to the width of this english letter... Likewise, a half-round spacing equal to half the round is known as en. Now these values are not defined using the letter M, since this letter can have different sizes for different fonts, even if the size is the same.

In Russian, the em dash and the em dash are used. To denote ranges and intervals (for example, in the phrase: "take 3-4 tablespoons of sugar"), an en dash is used, also called a dash-en (English en dash). An em dash is used in Russian in all other cases (for example, in the phrase: “summer was short and winter was long”). It is also called an em dash.

Problems with modern systems of units

Many designers dislike the current ration-based or cicero-based typographic unit system as well as typographic points. The main problem is that these units are not tied to metric or imperial units, and at the same time they have to be used in conjunction with centimeters or inches, in which the size of illustrations is measured.

In addition, letters made in two different typefaces can vary greatly in size, even if they are the same size at typographic points. This is because the height of the letter is measured as the height of the lettering area, which is not directly related to the height of the character. This makes it difficult for designers, especially if they are working with multiple fonts in the same document. The illustration is an example of this problem. The size of all three fonts is the same in typographic points, but the height of the character is different everywhere. To solve this problem, some designers suggest measuring the point size as the height of the sign.

How to convert centimeters to millimeters? Every student faced this question. Or maybe a person who left the desk a long time ago, but is not friendly with mathematics and doubts whether he remembers everything correctly. Or parents who are looking for the easiest way to explain this topic to their child. To dispel all doubts, let's figure out how to convert centimeters to millimeters.

Method one

This method is suitable for schoolchildren or becomes good advice parents of students. All you need to figure out how to convert centimeters to millimeters and vice versa is a ruler. Required good tool with clear markings. It is often a good idea to support an explanation with a visual example.

Therefore, it is worth taking a ruler and seeing where one centimeter is marked on it. After that, find the division marking one millimeter. Compare how much they differ. Then you can calculate how many divisions showing millimeters fit in one centimeter. The answer, obviously, will be 10. That is, one centimeter will be equal to ten millimeters, and vice versa. In the same way, you can consider both two and three centimeters, draw certain conclusions about how to convert centimeters to millimeters.

Another measurement method

This method is suitable for those who have already figured out how measurements change, and why as many as 10 millimeters fit in one centimeter. The answer to the question of how to convert centimeters to millimeters will be simple: you need to learn the ratio of these values.

One centimeter equals ten millimeters. Therefore, to find out how many millimeters are in two centimeters, you need to multiply ten by two. To find out how many millimeters are in five centimeters, you need to multiply ten by five.

Millimeters to centimeters are converted by division. If there are sixty millimeters, then they must be divided by ten (this is exactly how many millimeters in one centimeter). Accordingly, you get six. In other words, sixty millimeters are six centimeters. Solving simple tasks - translating some measurements into others - will help you remember how to convert centimeters to millimeters.

Length and Distance Converter Mass Converter Bulk and Food Volume Converter Area Converter Culinary Recipe Volume and Units Converter Temperature Converter Pressure, Stress, Young's Modulus Converter Energy and Work Converter Power Converter Force Converter Time Converter Linear Velocity Converter Flat Angle Converter Thermal Efficiency and Fuel Efficiency Numeric Conversion Systems Converter of Information Measurement Systems Currency Rates Women's Clothing and Shoes Sizes Men's Clothing and Shoes Sizes Angular Velocity and Rotational Speed Converter Acceleration Converter Angular Acceleration Converter Density Converter Specific Volume Converter Moment of Inertia Converter Moment of Force Torque converter Specific calorific value (mass) converter Energy density and specific calorific value (volume) converter Temperature difference converter Coefficient converter Thermal Expansion Curve Thermal Resistance Converter Thermal Conductivity Converter Specific Heat Capacity Converter Thermal Exposure and Radiation Power Converter Heat Flux Density Converter Heat Transfer Coefficient Converter Volumetric Flow Rate Converter Mass Flow Rate Converter Molar Flow Rate Converter Mass Flux Density Converter Molar Concentration Converter Mass Concentration in Solution Converter absolute) viscosity Kinematic viscosity converter Surface tension converter Vapor permeability converter Water vapor flux density converter Sound level converter Microphone sensitivity converter Sound pressure level (SPL) converter Sound pressure level converter with selectable reference pressure Luminance converter Luminous intensity converter Illumination converter Computer graphics resolution converter Frequency and Wavelength Converter Optical Power in Diopters and Focal distance Diopter power and lens magnification (×) Electric charge converter Linear charge density converter Surface charge density converter Bulk charge density converter Electric current linear current density converter Surface current density converter Electric field strength converter Electrostatic potential and voltage converter Electrostatic potential and voltage converter Electrical resistance converter Converter electrical resistivity Electrical conductivity converter Electrical conductivity converter Electrical capacitance Inductance converter American wire gauge converter Levels in dBm (dBm or dBmW), dBV (dBV), watts, etc. units Magnetomotive force converter Magnetic field strength converter Magnetic flux converter Magnetic induction converter Radiation. Ionizing Radiation Absorbed Dose Rate Converter Radioactivity. Radioactive Decay Radiation Converter. Exposure Dose Converter Radiation. Absorbed Dose Converter Decimal Prefix Converter Data Transfer Typography and Image Processing Unit Converter Timber Volume Unit Converter Calculating Molar Mass Periodic Table of Chemical Elements D. I. Mendeleev

1 millimeter [mm] = 0.1 centimeter [cm]

Initial value

Converted value

Feet and inches to meters and back converter

foot inch

More about length and distance

General information

Length is the longest measurement of the body. In 3D space, length is usually measured horizontally.

Distance is a value that determines how far two bodies are from each other.

Distance and length measurement

Distance and length units

Distance in physics and biology

Navigation distance

Distance in astronomy

In astronomy, long distances are measured, so special quantities are adopted to facilitate calculations.

On the image:

A1, A2: apparent position of the star
E1, E2: Earth position
S: position of the sun
I: intersection point
IS = 1 parsec
∠P or ∠XIA2: parallax angle
∠P = 1 arc second

Other units

League is an obsolete unit of length previously used in many countries. It is still used in some places, such as the Yucatan Peninsula and rural Mexico. This is the distance that a person travels in an hour. Nautical League - three nautical miles, approximately 5.6 kilometers. Lie is a unit roughly equal to the league. In English, both leagues and leagues are called the same, league. In literature, le is sometimes found in the titles of books, such as "20,000 Leagues Under the Sea" - the famous novel by Jules Verne.

Elbow- the old value, equal to the distance from the tip of the middle finger to the elbow. This value was widespread in the ancient world, in the Middle Ages, and until modern times.

Yard used in the British imperial system of measures and is equal to three feet or 0.9144 meters. In some countries, such as Canada, where the metric system is adopted, yards are used to measure the fabric and length of swimming pools and sports fields and fields such as golf and football.

Definition of meter

The definition of the meter has changed several times. The meter was originally defined as 1 / 10,000,000 of the distance from the North Pole to the equator. Later, the meter was equal to the length of the platinum-iridium standard. Later, the meter was equated to the wavelength of the orange line of the electromagnetic spectrum of the krypton atom ⁸⁶Kr in vacuum, multiplied by 1,650,763.73. Today, the meter is defined as the distance traveled by light in a vacuum in 1/299 792 458 seconds.

Calculations

In geometry, the distance between two points, A and B, with coordinates A (x₁, y₁) and B (x₂, y₂) is calculated by the formula:

Submit your question to TCTerms and you will receive an answer within minutes.

Calculations for converting units in the converter " Length and Distance Converter»Are performed using the unitconversion.org functions.