What can be cooked from squid: quick and tasty

hands or do you have to buy an expensive lift in a hardware store?

With the tools, time, and some skill, this is a doable task.

Why do you need a lifting mechanism and what materials are required for manufacturing

For some styles in the interior, the use of modern modern devices is unacceptable: they simply spoil the impression that the design of the decoration of the room (room) should produce.

This option is also possible: the living area is too small to accommodate a large plasma panel.

It must hold the weight of the TV securely.

The cable is tightly screwed to the carriage exactly in the center.

Only in this case the TV will move smoothly and distortions will be excluded.

Now that all the components of the structure are installed, it's time for the most active element - the motor. He will lift through transformation electrical energy into the energy of rectilinear motion.

It remains to connect the TV lift with your hands to the network by means of a button that activates the entire mechanism when pressed.

There are a lot of ways to make a TV elevator with your own hands. With special knowledge in the field of technology and electronics, this will not be difficult at all and much cheaper than buying such a mechanism in a store.

How to make your own monitor elevator is shown in the video:

Read also:

How to make screens for radiators: ...
How to decorate your wardrobe with your own hands: interesting ideas from…

How to hide the TV

Designers have long been concerned about the question: how to fit a TV into the interior? How to place a modern plasma screen in a vintage, country or eco living room? How to "reconcile" any TV in general with classic interior? What to do with the TV in the kitchen or bedroom so that it doesn't distract attention?

It is curious that nowadays one more question has been added to these questions: is it worth showing the TV at all and turning it into the focal point of the living room? This fashion trend increasingly captivates homeowners and becomes a real quest for designers.

1 - the panel sliding up, closes the TV:
The automated panel rises when the TV is turned on and, accordingly, lowers when it is turned off (the TV itself is built into a niche). From a cozy family living room to a discreet one - just one click of the remote control!

2 - lifting panels:
This is usually “ ready-made solution”In the form of a frame on which the TV is fixed, and on the outside there is a decorative panel, most often in the form of a picture or a mirror. Another interesting option is to hide the TV screen in the ... ceiling. If you want to watch your favorite movie, simply lower the hidden panel on which the screen is reinforced.

And yet - an original example of the implementation of this idea by hand home master: The edge of the panel is attached to a cable and lifted manually with a simple mechanism.

3 - TV on a mobile panel, sliding to the side:
For a rustic room or living room wooden house the TV hidden behind the fireplace will do. The flat screen is built into a mobile wood panel. As soon as you want to watch a movie, the TV panel will slide out to the side. Guests arrived? Turn off the TV and slide it back.

10.

4 - swivel mechanisms which will hide the TV:

A rich idea for two situations: (a) if the TV is located on the border of 2 zones of a room (two rooms) or (b) if the TV does not harmoniously fit into the style of the living room interior. In all cases, the TV is mounted on a special swing frame, but what the interior looks like when the TV is hidden may differ. Here are 4 interesting examples.

example-1: if necessary, the TV is hidden in a special furniture niche, the back of the frame exactly matches the front of the furniture.

11.

12.

13.

14.

15.

example-2: the frame with the TV turns and slides behind the shelf space, everything is closed from the outside with doors.

16.

17.

18.

example-3: on the one hand - TV, on the other - bookshelves, simple and ingenious.

19.

20.

21.

example-4: the TV is on the border of 2 rooms, it can turn in any direction, the solution is suitable for two adjacent rooms and for one divided into zones and for a bedroom with an attached loggia.

22.

23.

24.

TV pull-out from the cabinet:

An excellent solution for a TV in the bedroom is a bedside table with a pull-out panel. Its difference from the previous options is that the panel does not slide out to the side, but upward, which allows the use of the bedside table for its intended purpose.

25.

26.

27.

And other options for implementing this idea - in the kitchen, living room, bedroom. And the TV can also be pulled out of a niche by the window or even from a chest or coffee table, the TV is installed on a lifting panel (a factory solution), a hand-made TV is mounted on the back of a large coffee table with a drawer.

28.

29.

30.

31.

32.

33.

sliding panels and doors to mask the TV:

This option, how to hide the TV, we will consider in detail in a separate issue. And here are the promised examples in 2 versions: while watching and when you are not using the screen.

Notice how the panels are harmoniously selected. They fit perfectly into the style of the living room, and in its color scheme, and are successful in textures. In some cases, this is the maximum masking, in others, the panel turns into an art object. So ideas for different interiors and your preferences:

for fans of modern laconic style:

34.

35.

for connoisseurs of elegant restraint:

36.

37.

for those who like graphics:

38.

39.

for a rustic interior:

40.

41.

for an interior with exotic elements:

42.

43.

to create an accent color:

44.

45.

46.

47.

folding doors behind which the TV is located:
Sometimes it is a piece of furniture that is custom made or bought in a showroom. Laconic lines of the oriental or modern style cause admiration, sometimes much more than most of the stories on TV.

48.

49.

50.

51.

And here is an example of creative creativity that is not too ruinous to implement. A beautiful panel, divided into parts "a la diptych", is attached to the folding furniture doors. After viewing, simply close the flaps and doors and enjoy the beautiful scenery.

52.

53.

Televisions are becoming more compact. TV models make it easy to mount them on the walls, on special brackets. Despite all the newfangled interior solutions, the TV stand does not lose its relevance.

The interior itself does not always contribute to the possibility of wall fixing. This can be prevented by the window opening or the materials from which the walls are made, which do not allow the bracket to be fixed. In addition, the functionality of the TV bedside table allows you to place a variety of equipment or other items on it.

Each buyer draws an ideal model for himself, which will not only fit into the interior in terms of dimensions, but will also correspond to it in terms of colors and style.

Not every material needs finishing.

Wooden elements can also be decorated with artistic carvings on the outer walls or countertops.

Each buyer draws an ideal model for himself, which will not only fit into the interior in terms of dimensions, but will also correspond to it in terms of colors and style. Wide choose furniture products, including TV stands, allows you to purchase, it would seem, any model. Faced, however, with a specific task of choice, a person is often faced with the fact that either the size, the color, or the design do not fit. It is this factor that pushes many people to start making furniture with their own hands.

Making a TV stand with your own hands is quite simple. To do this, you just need to choose the right model, focusing on your professional level. The choice of material for the fabrication of the structure is also critical. Some materials make it easy and convenient to work with them even for beginners, while others require not only skills, but also special tools for processing. Assembling a TV bedside table with your own hands requires scrupulousness and a properly built step-by-step scheme for mounting parts.

Faced, however, with a specific task of choice, a person is often faced with the fact that either the dimensions, the color, or the design do not fit

In addition, you will need screws, self-tapping screws and four guides for further fixing the manufactured boxes on them.

The inner wall should not be removed, because it gives the structure additional strength, preventing it from sagging under the weight of the TV.

We draw a drawing of the future bedside table

For novice furniture craftsmen and just amateurs, it is best to use ready-made bedside table drawings. A lot of options can be found on specialized sites. When choosing a drawing, you need to focus not only on the final result, but also on the complexity of manufacturing and assembly. An important factor is the material recommended for manufacturing.

Some designs require certain materials that may not be suitable for the craftsman in terms of price or durability. For example, models with narrow countertops and shallow cabinet depths can support a lot of weight when made from solid wood. The use of chipboard in such cases will sharply reduce, perhaps, the permissible load on such a bedside table. Therefore, it is extremely important to evaluate the weight and width of the TV that will stand on it. It is also necessary to remember about additional accessories that will be needed when the TV is running, it can be speakers, a video player, and more.

Often, a TV bedside table can hold CDs, magazines, newspapers and decor items. This should also be considered before starting the drawing with your own hands.

Making a TV stand with your own hands is quite simple.

The list of tools can be shortened or expanded depending on the complexity of the product and the selected materials.

Often, the decor of TV cabinets is to combine various materials and decorating it with glass pieces.

We choose the best options for materials for work

A variety of materials makes it possible to make both very cheap and simple models, and swing at chic. Not any TV bedside table can be made with your own hands using any available material. Some designs involve only wood or only plywood. There are also more versatile designs that you can make with your own hands from existing scraps or leftovers from other furniture.

When making a curbstone, you can use:

Plywood.
Bar.
Wood, in the form of glued panels.
Array.

You can also make a curbstone partially from glass or decorative plastic. These materials are most commonly used for countertops and furniture doors.

Chipboard is the most unpretentious option for work; it does not require any special cutting tools or grinders. It is easy to cut and process. Its obvious advantage is the price.

When buying wood, you should pay attention to its quality. An important nuance is the absence of defects and dryness of the purchased material. Damp wood can deform indoors, thereby damaging the finished product.

An important nuance is the absence of defects and dryness of the purchased material.

Damp wood can deform indoors, thereby damaging the finished product.

You can make a bedside table with your own hands only with a jigsaw.

Preparing tools for work

You can make a bedside table with your own hands only with a jigsaw. Some craftsmen do even without it, ordering sawing according to a drawing when buying a material. Do-it-yourself furniture assembly still requires the following professional and non-professional tools:

Pencil, marker, or other writing object.
Thick cardboard for making patterns.
Ruler and tape measure.
Compass if some workpieces will have a round shape or rounded edges.
Jigsaw with files of the required size.
Clamps for gluing parts.
Glue.
Tape for trimming trimmed edges.
Screws, screws, confirmations.
Grinding machine.
Drawer guides for bedside tables.

The list can be shortened or expanded depending on the complexity of the product and the selected materials.

Chipboard is the most unpretentious option for work; it does not require any special cutting tools or grinders.

When buying wood, you should pay attention to its quality.

Stained glass doors look beautiful, although these structures are more fragile than solid sheets of glass.

Step-by-step instructions for making a bedside table

Preparing the drawing. We take a ready-made and verified drawing, or we develop it ourselves, taking into account the size of the TV and its weight.
We make patterns for all the elements. This stage will allow you to accurately calculate the material consumption and not make a fatal mistake.
We cut out materials.
Grinding cut edges. When working with wood, you will have to grind not only the cuts, but also the rest of the surfaces.
We glue the edges with tape. This step is necessary when using chipboard material. You will need an iron and a soft cloth to glue the tape.
We assemble the cut out parts. The assembly is always carried out according to the same scheme. You should start from the countertop. Legs or side backs are attached to it. Then the bottom shelf is screwed on. After general construction assembled, we fill the curbstone with additional details - middle shelves. The backrest and doors are attached in the penultimate order. If there are boxes, it is necessary to provide for the preliminary fastening of the guides on the inner sides of the side walls.
The last step in the assembly is attaching the legs, rollers, or overlaying heel pads.

Assembling a TV bedside table with your own hands requires scrupulousness and a properly built step-by-step scheme for mounting parts.

Not any TV bedside table can be made with your own hands using any available material.

There are also more versatile designs that you can make with your own hands from existing scraps or leftovers from other furniture.

You can also make a curbstone partially from glass or decorative plastic.

We make a long TV stand with our own hands

To make a cabinet with our own hands, we take a laminated chipboard of the color you like. Chipboard width 16 mm or 18 mm.

Insert a picture - http://prntscr.com/fit8k0

Required details:

Two sheets of 1600x454 mm for the table top and the bottom of the product.
Three walls 545x454 mm.
Shelf 767x454 mm.
The back wall is made of MDF 1600x545 mm.
Two drawers measuring 759x223 mm.
4 decorative handles.
4 legs.
4 heel pads.

In addition, you will need screws, self-tapping screws and four guides for further fixing the manufactured boxes on them. Between the drawers, it is advisable to make a shelf of MDF, measuring 767x454 mm.

To make the boxes, you will need two pieces of MDF, 750x445 mm each, which will be used to create the bottom of the box. The side walls of the drawers will require four pieces of chipboard measuring 450x220 mm. And two pieces of chipboard measuring 755x220 mm, from which the back wall of the box will be formed. Assembly drawer begins with the connection of the side and rear walls. Then the MDF bottom is attached. The last element is screwed on the front part, on which the decorative handles are preliminarily fixed.

It is quite difficult to make a bedside table with drawers, so this model should be taken only by craftsmen who already have certain skills in assembling furniture.

The same model can be assembled without using a cradle. The second compartment can be left without a partition in order to be able to put there more voluminous elements of equipment or decor. Or it can be made identical to the first compartment. The inner wall should not be removed, because it gives the structure additional strength, preventing it from sagging under the weight of the TV.

Having assembled a TV stand with your own hands, you can get not only a unique design, but also significantly save on buying a finished model.

A variety of materials makes it possible to make both very cheap and simple models, and swing at chic.

You can use clear, dark, mirror glass.

We customize the curbstone by means of decor

Not every material needs finishing. Film faced plywood looks completely self-sufficient and without additional decoration. Chipboard has glued decorative surfaces and, in addition to pasting cut edges, will not require painting. Solid wood is perhaps the finest in this sense. It must be primed and stained without fail. This coating helps to accentuate the wood grain and protect the wood from dullness, dust and moisture. If desired, the tree can be painted or varnished. Wooden elements can also be decorated with artistic carvings on the outer walls or countertops. Any materials can be painted, covered with decorative foil, stencils applied.

Often, the decor of TV stands consists of combining various materials and decorating it with glass parts. The glass used must not be less than 8 millimeters thick. You can use clear, dark, mirror glass. Stained glass doors look beautiful, although these structures are more fragile than solid sheets of glass.