What can be cooked from squid: quick and tasty

A simple deck chair made of wood. How to make a sun lounger with your own hands, photos, diagrams, blueprints for a sun lounger, video.

Chaise longue is an indispensable attribute of garden furniture for summer vacation on the banks of the river or in the country. You can make it yourself, in this article we will look at the process of making a simple and practical folding deck chair.

The design is quite simple, making a folding chair - a chaise longue will not be difficult.

How to make a sun lounger: blueprints.

The figure shows a drawing of a folding sun lounger, if necessary, the dimensions can be slightly changed.

1 - rail 20 x 50 x 1300 mm - 2 pcs.

2 - rail 20 x 50 x 1930 mm - 2 pcs.

3 - rail 20 x 50 x 590 mm - 2 pcs.

4 - rail 20 x 50 x 580 mm - 1 pc.

5 - rail 20 x 40 x 520 mm - 2 pcs.

6 - rail 20 x 40 x 560 mm - 2 pcs.

7 - fabric 530 x 1400 mm - 1 pc.

8 - screw M8 x 50 - 4 pcs.

9 - screws 6 x 45 - 2 pcs, and 6 x 60 - 8 pcs.

Folding sun lounger scheme.

How to make a chaise lounge: materials and tools.

To make a sun lounger, you will need hardwood: - birch, oak, yew, walnut, ash, beech, pear, elm or white acacia.

Hardwoods are more difficult to process, but the chaise longue will be durable and will last you quite a long time.

You will also need wood glue to fix the groove joints.

Of the tools you will need:

• Hacksaw for wood.
• Drill with drills.
• Chisel.
• Hammer.
• Sandpaper.
• Screwdrivers.

How to make a sun lounger.

We saw off the slats of the required length according to the drawings; it is desirable to round off the edges of the slats. Grinding slats sandpaper.

The picture shows the frames "A" and "B" and the backrest tilt adjuster "B".

Assembling the frames. We fasten the slats to each other with groove joints on carpentry glue, the joints must be strong and not stagger.

On frame "B" we cut out grooves for adjusting the inclination of the back of the chaise longue.

We drill holes for fasteners, the diameter of holes for bolts is 8 mm.

We connect frames "A" and "B" with screws through the holes, then we connect frame B.

We collect the frame.

We try on the fabric, stretch it, wrap it on the crossbars and sew it by hand or with a sewing machine.

The chaise lounge chair is ready!

Making a sun lounger video.

Main advantages

In my own way functional purpose sun loungers are the same chairs, but more stable and with a low seat. In them, you can rest in a semi-recumbent position, which allows the spine and all muscle groups to relax as much as possible.

The indisputable advantage of chaise lounges is their comfortable shape. The garden chair can be folded so that you can sit or lie on it depending on your personal preference.

Traditionally, sun loungers for summer cottages are made of wood, because since ancient times it has been considered the most environmentally friendly, economical and easy-to-use material.

Sun loungers are ideal for observing nature, as they are lightweight and very comfortable. Therefore, it is not surprising that many owners install them in their garden or in the country. Such furniture can stand on the street throughout the summer, and on winter period it can be removed to a suitable location, such as a closet.

Most often, garden loungers are made from materials such as:

• wood;
• plastic;
• rattan.

If you have no desire to spend time and energy on self-assembly garden lounger, you can always order it in the furniture showroom.

Types of structures

If you finally decided to start making a sun lounger for yourself, then at first it will not hurt you to get acquainted with the main types of sun loungers for a summer residence. There are quite a few of them, so only the most popular will be considered below:

These are just some of the sun loungers that can be purchased for a summer residence. If you wish, you can make your own chaise lounge in the form of a swing, as well as using ordinary tree branches as a material. It all depends on your preference.

Making a wooden deck chair

First, you need to prepare a certain set of materials and tools that you will need to make a homemade sun lounger:

• self-tapping screws;
• jigsaw and screwdriver;
• boards for sheathing the frame 2.5 cm wide;
• timber 40x40 mm for the frame;
• corners for fastening boards (4 pcs.); wooden plates with a thickness of 20 mm.

When going to the store for boards and slabs, we advise you to choose a material made from coniferous wood. It tolerates the negative effects of precipitation much better and has a wonderful aroma.

Stages of work

Now that you have everything you need ready, you can proceed to the assembly of the wooden lounger.

First, you should decide on the size of the garden chair. You can use a ready-made drawing or draw it up yourself. Typically standard sun loungers are 60 x 200 cm.

Now you can start making the wireframe. For it, you will need bars, of which you need to make four sidewalls - of which two should be 200 cm long, and two more - 60 cm long.

From the outside, the frame must be sheathed with a board 2.5 cm wide.

We take long sidewalls and attach 4 legs to them, having previously stepped back from the edge of 8 cm. The legs can be made from beams 10 cm long. To attach them to the frame, we use self-tapping screws.

Having finished the work on the manufacture of the frame, we begin to assemble the lattice. For it, we need wooden slabs, from which we need to cut boards with dimensions of 60 x 10 cm using a jigsaw.

We attach the boards to the frame of the chaise lounge using self-tapping screws. Be sure to leave a gap of about 1.5 cm between the boards. Then the lounger grill will look neat and beautiful.

If you wish, you can make a chaise longue with an adjustable back. In this case, the grate must be divided into two parts. One of them will serve you as a lounger, and the other as a headboard. We mount both parts to connecting boards. For a secure connection of the elements, it is best to use door hinges.

In order for the headboard to be fixed in a certain position, a transverse bar should be added to the frame structure from the inside. To it with the help of self-tapping screws, you need to attach a support stand for the headboard. If you don't have one, then you can buy it at any hardware store.

Now that your homemade sunbed for the summer cottage is ready, all that remains is to grind the boards, cover them with linseed oil or a special paint and varnish material to protect against moisture.

Making a fabric lounger

If a wooden folding deckchair does not suit you for some reason, then you can try making a fabric deckchair instead.

Materials and tools

To make a sun lounger from fabric material, you will need the following:

• bolts with nuts 8 mm each;
• a piece of durable fabric 200x60 cm;
• reiki round section 2 cm thick (one bar 700 mm long, two 650 and two 550 mm);
• rectangular boards 30x60 cm thick (two boards 1200 mm long, two 1000 and two 600 mm);
• sandpaper.

It is best to use tarpaulin, camouflage or denim to make a frame lounger. They are strong enough and resistant to wear and tear.

Algorithm of actions

Now you can go directly to the assembly of the fabric lounger.

As you can see above, making a chaise longue for a summer residence made of fabric is no more difficult than a similar lounger made of wood.

Buying a garden chair

Perhaps some summer residents do not want to spend time and money on making a sun lounger with their own hands. In this case, you can go to the store and buy a ready-made garden lounger there. The furniture showroom will offer you a variety of such products to choose from. Surely among them you will find how budget options and unusual design models of outdoor loungers.

After studying the proposed options and comparing their characteristics, you will only have to decide on the amount that you are willing to pay for a sun lounger. The cost of such loungers depends on the size and material of manufacture:

• wooden sun loungers will cost you in the range of 6000-15000 rubles;
• for plastic sun loungers you will have to pay from 1500 to 9000 rubles;
• foldable frame sun loungers, which can be purchased for 1350-9500 rubles, will not hit your pocket too much.

When going to the dacha, many are warmed by the thought that they will have the opportunity to lie down in the fresh air for at least a few minutes and enjoy the surrounding nature. But everyone has the power to make their vacation more enjoyable, if you pre-equip a place for it. To do this, you must have special furniture like a chaise lounge.

The easiest way to buy such a lounger is in the nearest furniture store, although some owners often make a sun lounger for themselves and thereby save a lot. You can do the same, especially since you do not need to have special skills and knowledge for this. Even the most ordinary wooden lounger for a summer cottage can be made from a material that is likely to be found in any household.

But in any case, you will have to prepare for this work, because without drawings you can hardly make exactly such a chaise longue that you want, especially if you do not have the slightest experience in this matter.

A homemade chaise lounge for a summer residence is much preferable to a store lounger, because you can decide for yourself how it should turn out, and upon completion of the work, decorate it at your discretion. Of course, this will require some effort on your part, but in the end all this will be offset by the comfort that your homemade sun lounger will provide you.

DIY sun lounger

The summer season is approaching and it's time to think about creating a sun lounger with your own hands. It will allow you to enjoy your outdoor recreation to the fullest.

Chaise longue in French means a long chair. This is a relaxed lounge chair. It can change the position of the backrest at the request of the owner.

DIY sun lounger

Sun loungers are widely used on beaches and pools. On personal plots, dachas.

Sun loungers are made from various materials:

• wood;
• plastic;
• aluminum;
• rattan;
• PVC pipes;
• durable fabric.

Wooden sun loungers are the most popular and environmentally friendly. They differ in a variety of shapes and designs. The disadvantage of monolithic wooden loungers is their weight. But this problem can be solved with wheels.

Plastic sun loungers are characterized by easy mobility, ease of maintenance, and relatively low cost. Minus their fragility.

Fabric loungers are versatile and comfortable. Their frame is made of wood, metal or PVC pipes. They fold easily and do not take up much space.

Rattan sun loungers look great in the bosom of nature. They are environmentally friendly. However, their purchase is expensive. With sufficient skills, you can simply weave a rattan bed yourself.

In this article we will tell you how to create wooden sun loungers with your own hands.

Monolithic sun lounger made of wood

Solid models are heavy. Therefore, to make it easier to carry, wheels are added to the headboard. Further instructions will help you make a sun lounger on wheels with your own hands.

You will need tools:

• electric jigsaw or hacksaw;
• drill;
• screwdriver;
• self-tapping screws;
• fine grain sandpaper;
• spirit level;
• roulette.

When choosing a tree, pay attention to conifers. They are sold at affordable prices and are characterized by increased water resistance.
For a sun lounger you need materials:

• glued wood board, its thickness should be 2cm or more; not less than 2 cm thick.
• boards 0.25 cm thick.
• wooden beam with a square section of 50x50 mm;
• 4 castors with a diameter of 10cm;
• corners for strengthening the bed;
• door hinges;
• varnish or paint.

We suggest you to make a chaise lounge according to this scheme.

Legend:

1. Front legs.
2. Rear legs.
3. Longitudinal carrier.
4. Backrest carrier.
5. Backrest support.
6. Load-bearing transverse.
7. Fixing bar.
8. Backrest support.
9. Wheels.
10. End bar.
11. Backrest slats.
12. Seat slats.
13. The support bar is transverse.
14. Fixing bar.

You can independently determine the size of the desired sun lounger and make calculations. Or use the standard size 60x190 cm. It is the most optimal and ergonomic for the average adult.

Assembling the sun lounger on wheels

We fold the base frame from the bars. We fix the supporting parts with corners, similar to those that fix the base of the bed.

We sheathe the resulting frame with pre-prepared and sanded boards.

We make blanks for legs from a bar. Their height usually fluctuates within 5-10 cm. We choose a comfortable one for ourselves and the household.

We drill holes with a drill, stepping back 5-7 cm from the ends of the longitudinal sides. We fix the legs with long bolts. We control the horizontal side with a spirit level.

We screw the wheels to the center of the legs with bolts with a diameter of 30mm.

Let's start cutting the lattice elements. With a hacksaw or jigsaw, we cut off boards 8x60cm.

Using self-tapping screws and a screwdriver, we screw the rails to the deck chair frame. Since the boards are not screwed tightly, we use spacers to obtain even gaps.

We should have two details. The smaller one is intended for the headboard. We connect both grilles with door hinges. Install a support bar under the opening part.

It remains to sand the production flaws. Apply wood primer. To paint in your favorite color and the chaise longue with your own hands is ready.

For more comfortable rest additional mattresses can be sewn to suit the size of the bed.

Simple lounger

To create a sun lounger made of wood with your own hands, you need the following materials, as well as tools:

• tape measure and square;
• pencil;
• saw;
• electric drill;
• screwdriver or screwdriver;
• screws, screws and pins for fixing;
• sandpaper or sander;
• putty for wood;
• dye.

The work uses wooden beams:

• for the back of the chaise longue, take boards 5 × 10 with a length of 88 cm - 2 pieces, 39 cm -3 pieces, 60 cm-1 piece;
• 2 longitudinal bars for a 215 cm frame;
• 2 transverse beams-50 cm;
• 6 legs -35 cm;
• 13 slats for a seat measuring 2.5 × 8 × 60 cm;
• 6 backrest slats - 2.5 x 8 x 88 cm.

The first priority is to create a very sturdy frame. We take two parts 215 cm long, connect them with screws with half-meter transverse parts.

Moving on to the seat. Take all 60 cm strips. Attach them to the frame with self-tapping screws, leaving small gaps. In order for the gaps to be even and uniform, use spacers 1 cm thick.

Create the lounger legs. To give maximum stability to the chaise longue, two legs are nailed at once "at the feet". One by one at the head. The instructions indicate bars with a height of 35 cm.But you can choose a height that is comfortable for you

We make a back from 2 boards 88 cm in size and 3 - 39 cm. The resulting frame must easily enter the base, leaving a small gap between the structures.

We securely fix the longitudinal strips. We round them off for a more beautiful look.

We attach the back to the base of the lounger. To do this, you need to drill holes, stepping back from the edge of the seat 9cm. We fix it with pins.

We make at the base of the chaise lounge 2 grooves for the support bars. The first 5x10 cm notch should be approximately 9 cm from the stud. The second is 20cm from the first. But its depth will be only 5x5 cm.

A 60cm bar is inserted horizontally into the first recess. To change the position, the plank is moved vertically into the second recess.

Sand up all the roughness, imperfections. Process. Cover with paint or varnish. The do-it-yourself chaise lounge is ready.

> Video garden lounger with your own hands

Fabric sun lounger

An armchair with a frame supplemented with fabric is one of the most comfortable, budget types of sun loungers. It is convenient to fold, easy to carry. Can be stored in flat view... It takes up little space.

To create a sun lounger with your own hands you will need:

• bolts, nuts with a diameter of 8cm;
• small nails with round heads;
• round sticks (1pc. -65cm, 2pc .- 50cm, 2pc. -60cm);
• rectangular bars 25x60cm thick (2 pieces 120cm, 100cm and 60cm long);
• file, sandpaper with fine grain;
• glue;
• durable material measuring 200 x 50 cm.

Choose your materials carefully so that your work is not in vain. Hardwood bars are perfect for a sun lounger. Stop the choice on:

• birch;
• oak;
• beech.

Choose fabrics with maximum strength. Perfect fit:

• teak for mattresses;
• tarpaulin;
• canvas;
• camouflage;
• denim.

These materials are highly durable and will last you a long time. Let's move on to creating a sun lounger with our own hands. The base consists of three frames:

• A. 1200x600 mm.
• Б.1100х550 mm.
• H.650x620 mm.

We cut the boards to the required length. Grinding with sandpaper.

In the longitudinal bars we make indents of 70 and 40 cm, we drill holes with a diameter of 8 mm with a drill, as in the case of bolts. Grinding with a round file.

We make cutouts in part B. They will allow you to change the position of the backrest later. To do this, step back 7-10 centimeters. You need to cut 3 or 4 grooves. We grind well.

According to the diagram, we drill holes in the bars to connect the parts.

We collect the base of the sunbed. We connect frames A and B with screws. Then we connect frames A and B. The ends of the round rails for greater reliability are lubricated with PVA before assembly. The chaise longue frame is ready.

Now you need to sew the seat. Place the material on the bed in a folded position. The fabric should be slightly taut. Measure the length you want. Sew the edges. Thus, you will increase the wear resistance of the fabric. The chair will look more tidy.

We attach the fabric base to the lounger. We wrap round slats on parts A and B. We nail down with small nails with round caps. The chair is ready.

ADVICE. The edges of the fabric base can be made in the form of loops. In this case, the seat is simply strung on the slats.

DIY fabric sun lounger. Model 2

For this chair you will need:

• wooden slats measuring 2x4 cm. Two slats each 122cm, 112cm, 38cm long. One piece 61 cm, 65 cm, 57 cm. And four slats 60cm long;
• slats 2x6 cm in size. One each 61 and 57 cm;
• 65cm wood rod with a diameter of 1.2cm;
• a piece of fabric 137 cm long and 116 cm wide;
• bolts, washers, nuts, screws;
• glue;
• round file, sandpaper or sander;
• electric drill.

Manufacturing process:

Process all the details of the future chair in advance. Sand them with a typewriter or fine-grained sandpaper. Cover with special impregnations that protect the wood from corrosion. Appreciate your work.

Pay attention to the drawing. Bars on the bottom of the legs help keep the back in position. Make them. Or slots, stepping back from the edge about 20, 25, 30 and 35 cm.

Drill the bolt holes in the backrest frame. To do this, measure 41cm on each side.

On the seat frame, step back 43cm from the top. Make holes.

On the part supporting the back, drill holes in the center of the edges.

Finish all holes with a round file.

Mounting the model

First assemble the backrest frame. A bar with a length of 61 cm will carry a heavy load of the body. Fasten it as securely as possible. Leave a small gap between the two battens. Tissue fixation will pass through it.

Assemble the seat. Fold it over the backrest frame. Be sure to place a washer between them. Bolt the frames together.

ADVICE. To prevent the nuts from loosening quickly, tighten the additional lock nut from above. For greater reliability, put the nuts on glue, varnish or paint. Tighten the nut first. Then loosen it slightly so that the parts rotate freely.

Install the back support piece with washers and bolts.

Sand up all the flaws. If desired, walk with varnish or paint.

Fold the fabric in half and sew, stepping back from the edge of 1.5 centimeters. Turn it out. Fold the edge of the material for the rods that fix the panel between the planks. Sew.

Now slip the fabric between the planks. Secure with a rod. This mounting model allows you to remove the fabric for washing without much effort.

Deck chair made of polyvinyl chloride

Another example of a lounger with a fabric base. Only in this case the wooden slats have been replaced with PVC pipes. Chair sizes may vary.

In this model of a chaise longue with their own hands were used:

• 2-inch PVC pipes;
• L-shaped connectors - 8 pieces;
• T-shaped connectors - 6 pieces.

Connect first for vertical plank PVC pipes lengths 30 and 45 cm using a T-shaped connector. Put the L-shaped connectors on the ends. Connect the second vertical in the same way.

Now you need to connect the two sides together. Note that one horizontal bar is solid. Its length is 66cm. It is attached closer to the T-joint, which in turn should be directed towards the inside of the structure. The second side consists of two 30cm pipes, combined with a T-shaped adapter, deployed at an angle of 45 degrees from the long side of the bar.

Do not hurry. Measure pipes accurately. As a result, you should have a rectangular design.

Now is the time to make the connection on which the seat will rotate. To do this, insert a 5cm long pipe into the T-shaped connector and secure it with another T-shaped adapter. It will form the basis of the horizontal wireframe.

Make the long sides similar to the vertical section, using pipes of 30 and 45 cm with an L-shaped connector. For the crossbars, use a 30cm solid tube. And also consisting of 2 x 20 cm with a T-shaped adapter.

You did everything right if you got a rectangle within a rectangle.

The seat is located between the long section of the vertical section and the short section of the horizontal section. Adjust the incline level to a comfortable level. Measure the distance between the two free T-pieces. Cut the pipe to the desired length. Insert the rear support.

Measure the fabric consumption for your chair. Use a thick fabric. For example, canvas, tarpaulin, jeans. Hem the edges and secure the fabric to the sun lounger. Enjoy your vacation.

Portable chaise lounge

The sturdy, lightweight chair is quick to assemble and disassemble. It is convenient to take it with you to nature. The model is so easy to manufacture that it is suitable even for novice craftsmen.

The folding chair consists of 2 parts:

• backrest covered with dense, wear-resistant fabric;
• wooden seat.

In addition to tools, the following materials are used:

• 2 legs for the backrest measuring 20x40x800mm;
• 2 seat legs - 20x40x560mm;
• 2 lower crossbars - 10x50x380mm;
• 1 top crossbar- 10x40x380mm;
• 1 crossbar for the seat - 20x40x300mm;
• 5 slats - 20x40x400mm;
• piece of material - 600x500mm.

The assembly procedure for a portable sun lounger is shown in the diagram.

First, the parts are connected using self-tapping screws and a screwdriver.

The workpiece is processed and varnished.

While the frame is drying, the fabric is tucked and stitched. Then it is nailed with staples and a construction stapler to a piece of wood.

We connect the back and seat of the chaise longue.

We enjoy relaxing in a brand new armchair.

Pay attention to another interesting chaise longue model in the video.

Original sun lounger

Design Koalition has developed an unusual sun lounger with a canopy made of fabric, which will allow you to enjoy outdoor activities even on a hot day, protecting from the scorching sun. The cost of such a lounger is 5970 euros. We will tell you how to save money and make an original sun lounger with your own hands.

To create a sunbed, you will need the following materials. And also tools:

• 2 sheets of plywood 2cm thick with a size of 160x180cm;
• 6 strips with a circular cross-section with a diameter of 30mm and a length of 92cm;
• 12 planks of plywood remnants 94x10cm;
• thick fabric from 92cm wide;
• construction glue;
• screws;
• roulette;
• cardboard for the layout;
• Circular Saw;
• electric drill.

Let's start creating a sun lounger.

Transfer the diagram to cardboard or heavy paper. To facilitate the task, you can pre-draw it into 10 by 10 cm squares. The template makes it easy to correct all the shortcomings on paper. Subsequently, you will only circle it 2 times. Or maybe you will get a taste and make some armchairs for relaxation.

We transfer the drawing to sheets of plywood and cut out the side parts with a circular or band saw. At the junctions with a round bar, we cut out recesses with a diameter of 30 mm.

We grind all irregularities and cutting defects.

Putting together a rigid structure. We grease the ends of the timber with joiner's glue or PVA. We insert the timber into the grooves and fasten it with screws. The joints can be additionally treated with glue for maximum reliability.

Now you need to put the structure on its side. Put weighting materials on the gluing points. And let the sun lounger dry completely.

We begin to fasten the strips to the ribs of the structure. At the same time, we make an indent between them with a length of 10-12 cm. Tighten the screws deeper so that their caps do not cling to the fabric and do not tear it.

Grinding the product again. Now we hide the build flaws.

With a wood putty, we hide all the screw heads in the places where the fabric is stretched. We paint a chaise longue.

You probably noticed that the description only gives an approximate width of the awning. The fact is that you can independently decide to cover the chaise longue completely with fabric, or make only a canopy. Decide for yourself. Measure the size and sew the awning.

ADVICE. It is better to fasten the awning with ties or Velcro. This will allow the fabric to be removed at any time and washed without problems.

It is so pleasant to relax at the dacha after a hard day full of worries. This is best done in nature. A sun lounger will help you to sit comfortably on the site or near the pond. It is not necessary to buy it in the store, it is possible to reproduce this piece of furniture with your own hands without much difficulty. A do-it-yourself chaise longue for a summer residence will not only help the owner to relax, but also transform the style and design of the garden plot.

Benefits of a sun lounger

A chaise longue, in essence, is the same chair, only lower and more stable. Due to its elongated shape, it helps to rest and relax all muscle groups in the body. A very important advantage of the chaise lounge is that its back can be fixed in any comfortable position.

The sun lounger is very comfortable to relax in the bosom of nature. Such relaxation brings only pleasant and positive thoughts to the human body. Since most of the sun loungers are made of wood, these items are completely environmentally friendly.

Wooden sun loungers are easy to use, lightweight and do not require much maintenance. In the summer, such a chair can be taken out into the yard, and in the winter it can be stored in the basement or in the house.

Making a sun lounger can also be made of rattan or plastic, but in this article we will talk about how to assemble a wooden sun lounger yourself.

Options for creating sun loungers

At the moment, there are a huge number of variations of making a sun lounger made of wood with your own hands. Some of them will be discussed below.

Deckchair made of wooden lattice

This model of a sun lounger is very common in seaside resorts. Now the owners country houses and summer cottages will be able to enjoy their rest on such a piece of furniture. The chaise longue is essentially flat with an adjustable backrest. The only thing that makes it difficult to move around the site is its severity. But the problem can be solved if you mount rollers or castors to it.

To collect this piece of furniture with your own hands you will need:

• Slabs with a thickness of 1.8 cm;

  Important! Boards are best used from softwood as they are weather resistant.

• For the frame of the bars measuring 45 * 45;
• For covering the sidewalls of a board with a thickness of 2.5 cm;
• Screwdriver and jigsaw;
• For working with wood, several drills with a diameter of 4 cm;
• Screws (it is better to take those that have a countersunk head);
• Mounting corners for the bed in the amount of 4 pieces;
• Ten-centimeter rollers in the amount of 4 pieces;
• Sanding sheet with grit from 120;
• Decorative coating (varnish, paint).

The master himself can independently choose the size of the chaise lounge that suits him best. Standard size are considered 60 * 190 cm. To begin with, it is best to prepare drawings.

The algorithm for making a sun lounger with your own hands is as follows:

1. We mount the frame of the future structure from the bars, fastening it with metal corners.
2. We trim the outer side with boards for greater decorativeness.
3. We mount the legs to the boards using screws 6 cm long.
4. In order to get a wooden lattice, you need to make boards of the same width from the plates using a jigsaw (each size is 60 * 8 cm).
5. If you want to make the backrest adjustable, then you need to separate it from the structure of the lounger and fasten it with a door hinge.
6. We mount a fastening strip between the long beams in the headboard area. We attach a support stand to it with the help of screws.
7. This completes the work on the manufacture of the sun lounger, it remains only to walk on it with a grinder and cover it with paint or varnish.

In addition, you can watch the video on how to make a sun lounger out of wood with your own hands:

Wooden deck chair with fabric seat

This chair is also very popular. It is convenient because it is very convenient to move this piece of furniture around the site, it does not cause any problems during transportation and storage, as it folds into a compact flat shape. Making such a sun lounger with your own hands is not difficult.

For such a sun lounger you will need:

• 6 slats with a rectangular section of the same size 25 * 60 cm, but of different lengths: 2 x 120 cm, 2 x 110 and 2 x 62 cm.
• Five slats with a circular cross-section of 2 cm. The quantity depends on the length: 65 cm - 1 piece, 60 and 50 cm, two slats for each length.

  Important! Reiki should be used from wood such as birch or beech. They are more durable.

• Durable fabric in sizes 200 * 50 cm. Canvas, jeans or tarpaulin are perfect.
• Bolts and nuts for furniture with diameters of 8 mm.
• PVA glue.
• The file is round.

The work is carried out in the following sequence:

1. If there are no ready-made rails, then you need to cut them in the right amount and the right length. All sections must be sanded.
2. The main frame is drilled at a distance of 40 and 70 cm. Then the holes are processed with a round type file.
3. To change the inclination of the backrest, the other frame is supplied with four cutouts in increments of 7 cm.
4. In order to mount the seat, 2 cm holes are made at both ends of the rails.
5. Round cross-sections at the ends are lubricated with PVA glue and installed in the prepared holes.

This completes the work on assembling the frame, now we turn to sewing the seat. Before that, you need to measure how long to take a piece of fabric. To do this, you need to fold the chaise longue and measure the amount of fabric. In this position, it should sag a little, not be taut.

In order to fix the fabric on the chaise longue, you first need to process the edges on sewing machine, and then, wrapping the transverse round bar, nail them with small nails. On both sides.

It is also possible to make loops on both sides and attach the fabric on them to the crossbars.

Kentucky folding armchair

This original made chair is assembled from bars, folds easily and does not take up much space during storage.

To make it you need to prepare:

• Bars size 45 * 30 The size 50 * 33 cm is also used.
• Galvanized wire with a cross-section of 4 mm or studs with washers and nuts.
• Staples for clamping 16 wires.
• Fine-grained sandpaper.
• Nippers and hammer.

For work, the total sum of the lengths of the bars is 13 meters. All cuts and holes in the bars must be carefully sanded.

The work is carried out in the following sequence, as shown in the drawings:

Conclusion

A chaise longue is a very comfortable piece of furniture that gives home coziness and a certain charm to the site. It is a pleasure to rest in such an armchair.

No need to buy ordinary plastic chairs on the site, which look too simple or purchase expensive garden furniture, just take a little time to create your own unique pair of sun loungers, so you can save your budget and develop the skills of a carpenter, and make original decoration plot with your own hands, which will then be pride. You can make several sun loungers of the same type, or you can try yourself in making all the models at once and place them throughout the garden so that you can relax anywhere.

Arriving at the dacha, some begin to work hard - weeding the beds, fighting weeds and pests, watering. And some begin on the contrary, to rest intensely. In such a case, a chaise longue is indispensable. The word has French roots and means "long chair".

Basically, that's right - a long resting chair that is comfortable to lie on. How to make a sun lounger with your own hands, with photos and illustrations, what to make it from, interesting designs and schemes - further in the article.

Materials for making sun loungers

As a material for a sun lounger, you can use:

• wood, rattan;
• plastic and pvc pipes;
• metal;
• the cloth.

The most popular, due to their strength and environmental friendliness, are wooden sun loungers. Solid wood has only one drawback - the rather large weight of the product. However, by adapting small wheels to the chaise longue, the problem can be considered solved.

Plastic is lightweight and cheap, unpretentious in terms of maintenance, but fragile and short-lived compared to wood or metal. Plank beds made of fabric are comfortable, do not take up much space when folded and have a durable metal or wooden frame. Sometimes PVC pipes are used as a frame, which makes the structure cheaper, but makes it not so reliable.

Rattan is a high-quality, environmentally friendly material, a chaise longue from which looks great in the country. Its disadvantage is the very high cost of products made from it. And few people know how to weave rattan furniture.

To make the wooden lounger durable, the wood must be protected with impregnations and paints and varnishes. It is recommended to protect the product by impregnation before assembly, and paints and varnishes can be processed after assembly.

Deckchair made of wooden lattice

To make a lounger you will need:

• softwood slabs;
• wooden beam;
• jigsaw, hacksaw;
• roulette;
• manual frezer;
• fittings - self-tapping screws, door hinges, metal corner.

The frame is assembled from a bar using metal corners, boards are attached from the outside from the sides. Next, legs are attached to the frame and boards. A grate is cut from a wood board with a jigsaw. The backrest is a separate element of the frame; it is connected to it using door hinges.

A fastening bar with a stand is attached to the headboard with self-tapping screws. Wheels are attached to the legs from the side of the headboard, if frequent transportation of the structure is necessary.

Before assembly, all elements are impregnated with a protective compound for wood, after assembly they are sanded and varnished with yacht varnish or covered with alkyd enamel. The second option is less desirable, since the paint will cover the texture of the wood, and the product will not look so interesting.

Fabric sun lounger on the frame

Extremely comfortable, but short-lived design - the fabric quickly deteriorates. The lounger is subject to restoration, you just have to re-tighten it with a cloth. For its manufacture, a frame from an old clamshell or from a children's bed is suitable. If there are none, it is quite possible to make the slats yourself.

Holes are drilled in the main frame, and cutouts are made in the second element so that it is possible to adjust the inclination of the back of the chaise lounge. To mount the seat, holes are drilled at both ends of the rails. Cross-sections of the crossbeam are inserted into the holes and glue them onto the glue.

The seat is made in such a way that it sags slightly - so it is much more comfortable to rest. The edges of the seat around the perimeter are sewn on a sewing machine. The round crossbar is wrapped in fabric and fixed on both sides with small nails.

There are many original ideas for arranging a sunbed, some require a fairly decent investment of money, some options will cost almost nothing.

Investing a certain amount does not always mean that a chaise longue will turn out better and of better quality than made from scrap materials. In many ways, success depends on the thoughtfulness of the design and on the skill of the person who assembles the product. Buy a ready-made, or make a chaise lounge yourself - everyone decides to make something on their own to the best of their financial capabilities and skills.

Photo of a sun lounger with your own hands

(18 estimates, average: 4,22 out of 5)

What summer resident does not dream of relaxing after a hard week at his site, taking a comfortable position on a comfortable cot? However, a chaise longue is not a cheap pleasure if it is really high quality and good. What to do for those who cannot afford a good sun lounger, but the desire to relax is great? Do not be content with small things: put an uncomfortable bench or chair aside.

This article will cover instructions and a step-by-step explanation, and even an amateur in the craft of a carpenter will be able to make a sunbed with his own hands, which can be taken even on a fishing trip. The chaise longue will harmoniously fit into your summer cottage exterior and will become an integral part of your holiday.

What is a sun lounger

The chaise longue is similar to a chair made of wood, but it is more reliable and smaller in size. It is convenient in that a person can take a position suitable for the spine and back muscles. Another no less pleasant fact is that the backrest of the garden chair is adjustable. The garden lounger is quite mobile: in the summer, it can be in the garden on the site, and in the winter - somewhere in the house.

In order to make folding wooden chairs, you will need:

1. Some kind of tree, since this material is the most successful for a garden lounger, moreover, it is quite environmentally friendly;
2. Rattan;
3. Plastic;
4. 2 cm board made of glued wood;
5. Wooden boards and beams;
6. Kit necessary tools: jigsaw, drill, screwdriver.
7. Drill;
8. Rollers (10 centimeters in diameter);
9. Corners (mounts);
10. Sanding sheets;
11. Varnish, paint (at personal discretion);

Chaise lounge dimensions

The traditional size of a chaise longue is 60 x 190 cm, but you can choose the one that will suit your needs. You should start with a schematic representation of the future chair, drawings should provide for all the nuances... When a decision has been made about the appropriate size, you can already start preparing the parts.

Construction stages

It is necessary to prepare the bars for the legs - 5-10 cm. Next, you need to attach the legs, stepping back 5-7 cm from the edge of the bars, and to them - the rollers.

Parts of the lattice for the chair must be made using a jigsaw. For them optimal size will be 8 x 60 cm. The spacers will help make a suitable distance from 1–2 centimeters so that the strips can be screwed to the frame. After all this work has been done, the chair needs to be sanded and varnished or painted.

If you wish, you can also make a folding country chair. In this case, the wooden lattice must be delimited into 2 parts, which then you need to connect with door hinges. Also, do not forget about the mounting bar, which must be installed so that it supports the rack, screwed on with screws.

Lounger with fabric

The easiest way to make a sun lounger with your own hands is a chair made of dense material on a frame. This is the best choice for suburban area , since it is quite multifunctional: in a matter of seconds you can make a chair out of your country chair.

Necessary materials:

A fabric of sufficient density is suitable for a folding country chaise longue, good quality and not exposed to sunlight and moisture. You need to choose jeans, canvas or tarpaulin.

The work needs to start by preparing the slats of a suitable size and grinding them, and after that you can start assembling all the elements.

Assembly instructions

It is necessary to drill holes for bolts of the correct size on long bars, eliminate any irregularities by grinding. Then in a place located in close proximity to the head lying, you need to make the same holes so that you can change the bending angle.

At the ends of the long bars, two holes must be made through which the seat will be made. The diameter of the round bars should be the same as the diameter of the long ones. For better connection coat the ends with PVA glue.

Bolt all the resulting elements through the holes made in the headboard.

After the above steps, you can proceed to the final stroke - stretching the fabric. Stretch the fabric over the frame products, fasten the edges on the crossbars with a thick thread (if you decide to sew the fabric before attaching it to the frame, you can use a sewing machine).

Kentucky armchair

This chair, perhaps, can be called even more interesting than the previous ones, because it will really become a decoration of your plot. The assembly of the Kentucky chair is carried out only by means of the uneven bars.

In order to make a chair, you will need the following materials:

Assembly instructions

You need to start with the processing of wood in order to prevent its destruction, fading, protect it from moisture, sunlight, wind. At this stage, you you need a special mixture for deep impregnation of wood for coloring (stain). It should be specially designed for working with exterior items. You can also use parquet oil suitable for wood objects. After completing this stage, you need to sandpaper all the bars.

The holes need to be made with a diameter of six millimeters.

The hot summer gives a person a lot of trouble. How sometimes you want to lie down somewhere and take a nap under the dense crown of trees. Such rest both relaxes and allows you to gain additional strength.

To please yourself with such a relaxing relaxation, you need to come up with something. Something that is quite easy to do at the same time, and won't take much time. And here you should pay attention to the unusual long chaise longue chair. This is a pretty simple and handy thing.

And in order not to overlook anything, it is enough to use the photos of the sun lounger set by your own hands, which can be found in huge numbers on the Internet.

Long ... chair?

A chaise longue is a long and light wooden chair designed for relaxation. Most often, sun loungers can be seen at tourist camps, recreation centers, sanatoriums and hotels. They are installed next to a pool or an artificial reservoir, where any vacationer can calmly lie down and relax.

The chaise longue fits very well into the overall interior, so a person can install it in his country house, at home or on a plot. Beautiful appearance will allow you to decorate any home corner.

A person can either buy one for themselves, or make a sun lounger with their own hands.

What do we have?

Comfortable long chairs look completely different. And before proceeding directly to work, you should understand what type of sun lounger you need to make. They are:

• in the form of a rocking chair (the back is at an angle, so the resting process is very comfortable. You can not only sit, but also lie down and even sleep);
• in the form of an ordinary chair (elements of a folding bed or a crib are taken as a basis; armrests are mounted at will);
• in the form of a monolithic product (with hand assembled all parts are tightly fastened, so parsing is impossible; possesses strength and reliability. Backrest adjustment is not provided, the product itself does not fold);
• in the form of a soldered product with beautiful hand inserts (chaise longue self made possessing amazing beauty; can fit into any interior);
• in the form of a lounger (strong and reliable deck chair made of plastic or wood; perfectly polished and varnished);
• in the form of a portable product (it is compact and reliable; a mechanism for adjusting the position is provided).

Cheap but angry

The materials that should be used when working on a sun lounger are very varied. The myth that a deck chair is wooden chair, unreliable.

When working on its creation, the most various materials, which are at the same time quite cheap, and you can find them in any hardware store. A sun lounger can be made from:

• wood. In this case, the chaise longue will be distinguished by its strength, reliability, and environment it will not suffer. Minus - it weighs quite a lot (wheels should be attached to facilitate transfer);
• fabrics. The base of the chaise longue is pleasantly comfortable and comfortable. The frame is made of wood;
• rattan. A chaise longue, heavily made for home decoration. It is environmentally friendly, but there is one big drawback - the price;
• plastic. Plastic sun loungers are very light, so you can safely take them on a hike. The frame is made of wood or a special pipe. Minus - weak reliability;
• PVC material. Chaise longue on a fabric base, but the base is made of PVC pipes.

Beginning of work

After the type is selected and the material is selected, the work starts with the outline of the drawing of the sun lounger. The drawing plays the main role, since during its creation the dimensions, shape, additional inserts and much more are determined, which will be included in the final work.

Not everyone can draw such a scheme, so if necessary, you should contact a specialist.

Help assistants

After the approval of the drawing, in order, for example, to make a wooden chaise lounge with his own hands, a person will need the following assistants at hand:

• wood for the legs of the back, seat;
• a wooden rod to support the back of the piece;
• fabric for the back itself;
• bolts;
• nuts;
• screws;
• self-tapping screws;
• washers;
• special glue;
• drill;
• hand saw;
• marker;
• roulette;
• sandpaper;
• round file.

Using these simple devices, you can make a beautiful and comfortable lounger for relax.

Fabric sun lounger on a wooden frame

If you need to make a small version of the chair, then folding sun loungers come to mind. A folding deck chair is very easy to do. At first:

• it is necessary to take a base from a cot or cot;
• drill holes in the main frame;
• make four cutouts in the auxiliary frame (to adjust the backrest tilt);
• make holes for both ends of the rails (for installing the seat);
• grease the round cross-pieces with adhesive and install in the holes.

In the second phase, the seat itself is made. For this, fabric is taken, and measured required sizes(the fabric must sag after installation).

Then the fabric edges are processed on the sewing machine. At the very end, the fabric is pulled over the crossbar and nailed.

Conclusion

Making a sun lounger for a summer cottage or at home is not difficult. If everything is done correctly, then in the end you can get a wonderful helper who will serve as a resting place during the most difficult part of the working day.

Photo of sun loungers with your own hands