What can be cooked from squid: quick and tasty

Devices such as thermostats for heaters are used to control and change the current room temperature. Thanks to a special scale or display, you can create the most comfortable environment without wasting electricity. By the way, such devices can control the temperature of not only oil or infrared heaters, but also monitor the heating of the underfloor heating system.

Characteristic

Thermostats for heaters are useful devices, thanks to which you can completely eliminate overheating of the room and the heating system as a whole. Using such a regulator is quite simple. You just need to set the required temperature on the scale that you want to get, and the device will take care of the further heating of the room by itself. In addition, the thermostat for is able to maintain exactly the temperature that you set on the device for a particular period of time. During the specified period, the system will automatically maintain stable air heating and will turn off only after it expires.

Connection

Often, one such regulator is installed in each room. Connecting the thermostat to infrared heater, which heats two rooms at the same time, makes it difficult to control the system. Therefore, experts recommend connecting this device to only one heating device. Thus, thermostats for heaters are able to control the room temperature as accurately as possible at the required value.

Why is it impossible to connect the regulator to several heaters?

There are several reasons for this. At first, different rooms have a different area, which no longer makes it possible to tune the heater to a normal temperature regime. Secondly, setting the optimal degree cannot be done due to differences in the heat transfer of rooms. That is why it is necessary to connect its own, separate thermostat for each room.

How do they work?

If you think that after setting the values for the heaters they work without interruption, you are deeply mistaken. The essence of their work is as follows. When the temperature in the system reaches the set level, the device turns off, and when the heating level drops by 2-3 degrees Celsius, this device turns on again and works until the heater heats up again to the set mode. This happens until the timer that you have set is triggered. In general, the mechanism can work from several minutes to several hours, maintaining the optimum air temperature.

Price

The cost of such devices is on average from 800 to one thousand rubles. The price may depend on the type of construction, manufacturer, and the presence or absence of a liquid crystal display in the regulator showing the current temperature.

The climatic features of the country at a time when the mark on the thermometer drops below 0˚C, make you think about home insulation. Often alone heating system cannot warm up the air in your house until optimal temperatures, and not everyone can afford the installation of autonomous heating. In this case, the use of household floor, wall heaters becomes relevant.

However, despite the variety of models presented, their owners strive to modify the devices and improve the heating process: adjust the functions of precise temperature control, which significantly reduces heating costs.

That is why the question often arises of how to replace the built-in thermostat, temperature controller:

floor, oil radiator,
heat gun,
electric convector,
electric radiator,
electric heating element, electric heating element,
infrared (IR) panels of wall, floor type,
and other heaters that plug into an outlet.

That is - what kind of analogue to the built-in thermostat of a domestic heater to choose?

To find the optimal solution to this issue, we will consider the main types of household heaters and the temperature regulators used in them.

Types of the most common heaters (household)

In Russia, the range of heaters offered to the consumer is wide:

oil heaters suitable for heating rooms with a small area. Although this type of heater is economical, the question often arises of how to replace the built-in oil cooler thermostat in order to more accurately maintain the temperature readings and thereby reduce electricity costs;
heating IR panels(their floor, wall types, powered by an outlet) provide very fast air warming up in houses, cottages, offices and shops. They are distinguished by their compactness, quiet operation and safe operation. Temperature regulators of IR panels differ in type, and different models can be equipped with both a functional thermostat and its mechanical analogue, or only a heating on / off button;
floor, wall radiators it is recommended to be installed in rooms with cold walls or in rooms with large glazing. This type heaters are used with success both in residential buildings and in swimming pools, car interiors, winter gardens... The thermostat in such devices is either absent or has minimal functionality and is not able to provide uniform heating;
heat guns gained popularity among consumers due to the possibility of quick heating of the room, however, the power consumption when using them is much higher;
electric heaters were invented at the end of the 19th century, since then they have undergone significant changes and have become the most powerful and safe, but the principle of their functioning has remained unchanged. The presence of built-in thermostats is also not always a guarantee of uniform heating and economical consumption of electricity to maintain the required temperature.

The disadvantage of many household heaters with a manual mode switch

With many positive aspects when using household heaters, the operating mode of which the user can control independently, a significant drawback is revealed.

This disadvantage consists in the need to constantly select the desired mode of operation of the device manually. This option is impractical both because of the need for independent control, and because it does not allow economical use of electricity in the absence of the owners in the house for a long period: the weather in our country is very changeable, therefore, in the absence of owners, the temperature regime set on the heater can be insufficient or, conversely, excessive. Sudden temperature changes can negatively affect indoor plants, household appliances and the general condition of the room.

Thermostat Terneo RZ as a replacement for the built-in thermostat of the heater

The thermostat built into the heater performs the function of automatic holding, temperature control. However, as a rule, these devices do not have a temperature scale; therefore, it is impossible to fine-tune the mode, and the principle of their operation is to increase or decrease the heat supply.

Thermostat Terneo RZ - modern model which is compatible with warm floors, convectors and other heaters powered by an outlet. The device helps to set temperature values from 0 to 30 ° C, without additional effort.

How the Terneo RZ works

Using a thermostat begins with plugging it in and connecting the heating device directly to the outlet of the thermostat itself. After that, on the control panel of the thermostat, you must select exact value temperature.

Such a miniature device is capable of controlling a heater, and when the room temperature is understood to be set by the user, the heating will be turned off. Additionally, when using Terneo RZ, it can be switched to cooling mode. The Terneo RZ thermostat is a way out for those who do not want to install electrical wiring and are looking for how to replace the built-in thermostat of an infrared panel (wall / floor), an oil radiator, a heat gun, and other household heaters powered by an outlet.

Terneo RZ advantages

The advantages of this thermostat are mainly in its technical characteristics ah and features of functioning:

compact size;
adjustable hysteresis, that is, the temperature difference, based on which the device is turned on / off;
the ability to connect any device compatible with the thermostat;
Terneo RZ has a multi-device control function;
wide temperature range: 0-30˚С;
when using Terneo RZ, there is 40% electricity savings;
Terneo RZ does not require any indoor wiring manipulation;
operational safety (protection against children, protection against overheating);
the ability to use with devices that support the cooling mode (air conditioner, fan, etc.);
affordable cost. When purchasing a thermostat, the costs pay off within a few months, which undoubtedly makes it a profitable option for those people who are considering options for replacing the built-in thermostat of a domestic heater.

Per last years, in our century high tech, items with minimal indicators of energy consumption for their work are of particular value. Such products are especially ideal for heating devices, effectively regulating their performance. One of these items is a thermostat for an infrared heater, which will be discussed in this article.

Types and characteristics of thermostats

A thermostat is a device that allows you to fix the temperature in a room at a certain time interval and at the same time adjust the device settings to the required values. For example, when the temperature reaches a certain figure, the heating is forced to end the work cycle. And, on the contrary, with its decrease, the device resumes its work.

The design characteristics and the principle of operation of thermostats can be different. There are two main types of thermostats for heaters:

mechanical;
electronic.

Nowadays, an increasing number of consumers are inclined to think that the only way to improve the quality of home heating with minimal costs is an electric thermostat. For most people, the topic of reducing the cost of heating apartments to a minimum is very relevant, but this can be done either by switching to autonomous heating, which is not always possible and too expensive, or by using special control devices.

Since the central heating system is imperfect, and relying only on it is a risk of freezing, an electric heater with a thermostat is in great demand as an additional source of heat.

The principle of operation and functions of a household thermostat

Even houses with autonomous heating have some kind of electric heater in reserve, let alone apartments that depend on the whims of the city heating system. It could be oil radiator, infrared lamp, electric fireplace or their analogs. Their presence is quite justified, since during the off-season, when it suddenly got colder, and the heating has not yet been turned on, they are the only way to keep warm.

The easiest way to create a comfortable atmosphere with the help of such devices and save on electricity is to use a thermostat in the socket for household heaters.

The purpose of any temperature controller is to monitor the level of heating of air in the room and maintain it within a given range. Since at the same time it automatically turns off and on the heating device, it additionally saves either electricity or fuel. The electric temperature regulator for air heaters performs the same actions.

The biggest advantage of such devices is that they do not need to be installed in the heater, but simply plugged into an outlet and set the desired temperature parameters. By appearance it looks like an adapter, since on one side it has a plug, and on the other - a socket into which an electric heater is connected. Even a person who first took such a device in their hands can easily cope with a thermostat of such a plan. As a rule, on the front side it has a display on which temperature settings are set.

The principle of operation of the device is very simple:

It is plugged into an outlet.
An air heater is connected to it.

When choosing, for example, a thermostat for an oil heater, you should study the technical parameters of both devices so that their power indicators either coincide, or the heater has a lower one.

Set the desired temperature for heating the air and enjoy the warmth.

During operation, the temperature controller for the electric heater collects data on the level of heating of the air in the room. As soon as it reaches the specified parameters, a relay is triggered in the device, which cuts off the supply of electricity to the heater. When the air has cooled down to the lower indicator of the set range, the reverse process occurs and the relay turns off, letting the current into the air heater.

A similar device is used not only for wall or floor electric heaters, but also for connecting another household appliances: table lamps, irons, electric kettles, air conditioners and more. Depending on the purpose, the required type of thermostat is selected.

Types of thermostats for electric heaters

Today on the market there is a huge number of models of thermostats for all types of heaters, from ordinary oil fireplaces or wall heaters to the "warm floor" system and heating boilers.

They differ in color, shape and size, and technical parameters and can be easy-to-use electromechanical thermostats or digital devices with programming functions, remote control and built-in Wi-Fi. As a rule, the cost of such devices is the higher, the more settings and functions they have.

According to the method of fastening, they are divided into wall-mounted devices, which are installed permanently and connected to the mains, and portable, such as thermostats in an outlet. The latter can be installed in any room where it is.

By the type of setting, thermostats are divided into:

Mechanical, when all parameters are entered manually. Usually, they are limited to a small temperature range and do not have a function to adjust according to the time of day. In addition, they are wall-mounted and connected to the electrical power cable. The main advantage of such a device is its low cost.
Electronic temperature controllers have the function remote control and settings. They have a fairly large monitor, which can be either touch-sensitive or equipped with buttons. The microprocessor processes all indicators of the change in air temperature and compares them with the set parameters, and in case of their discrepancy, turns on the heater or disconnects it from the mains.
Controlling the thermostat via a GSM program allows the owner to monitor the efficiency of the electric heater or change settings via a smartphone while far from home. A SIM card is inserted into such a device associated with mobile phone host.
Programmers with built-in Wi-Fi are one of the most expensive models thermostats. For electric heaters, it is advisable to install them if they are the main source of heating for a house or apartment. As a rule, their program allows not only setting the temperature parameters, but also tying them to the time of day and days of the week, setting them up for a week in advance. You can control such a device from a smartphone, tablet or computer at any distance, as long as there is Internet access.

If an electric wall heater with a thermostat is used as an additional heat source, then it is usually either electromechanical or electronic. It makes no sense to install expensive equipment for a conventional air heater.

How to choose a socket thermostat

It is necessary to approach the choice of a regulating device responsibly, since if you do not take into account the technical parameters of the devices, you can, at best, get a burned-out heater, and at worst, a fire in the apartment.

Regardless of whether an electric overhead thermostat for heating is needed or portable, you should decide what it will fix. Currently, there are devices on the market that monitor the temperature of the air in the room and those that control the heating of the heater itself. As a rule, the former create the necessary microclimate, while the latter make sure that the device does not exceed the maximum specified parameter, no matter how comfortable and warm the room is.

It is imperative to find out the power of the thermostat and correlate it with the technical parameters of the heater. Ideally, if the capacity of the heater is 30% lower than that of the temperature controller.

It is also necessary to establish what the temperature range of the device should be. For domestic heaters, as a rule, a run from + 5 ° C to + 35 ° C is sufficient.

Not all outlet thermostats are suitable for rooms with high humidity, so you need to check the degree of protection of the device.

The price of such devices directly depends on their "filling", so you should not be guided by this parameter when choosing a thermostat for an electric heater. It is important what functions it should have so that people feel comfortable being at home.

A plug-in thermostat is a great opportunity to save money on electricity bills when you need to connect household heaters. They also extend the "life" of the heater, turning it on and off as needed, while observing the set temperature regime for heating the room.