What can be cooked from squid: quick and tasty

How to decorate a bathroom cheap is a relative concept. Depends on your financial condition and your personal wishes.

If you focus on the majority of the population living in apartment buildings, then you can pick up several, fairly budgetary options.

But first you need to consider ways of saving when performing finishing work.

Producing work on our own or engaging third-party hired specialists. Naturally, the implementation of a complex of works on your own will save a significant amount of money.

It is quite difficult to carve out finances on the wages of hired workers - the only option is to choose a specialist who offered the lowest cost of his services.

The choice of the type of finish. Rational planning and use modern materials can provide an opportunity to reduce the budget by tens of percent.

The use of the same type of finishing materials that differ in price. This method will reduce costs by 10 ... 20%, but there is a high probability of making a mistake with the choice of materials and running into a fake.

Conclusion: finishing the bathroom with minimal cost possible when performing work on their own, from inexpensive materials, using a rational type of finishing.

Bathrooms located in brick or panel houses("Khrushchev", "Brezhnev"), as well as more modern buildings, consisting of 9 ... 14 floors with a typical layout that came from the Soviet era.

Painting with paints and varnishes

This method is the most budgetary, low-cost in terms of materials and the amount of labor invested.

Preparation of the base, including the repair of the surface of the walls by applying plaster and putty. Treatment with antiseptic compounds.

Priming the surface with acrylic primers from the “aqua-stop” series - they fasten the structure of the base and create a moisture-resistant film.

Application of paintwork, - you can use ordinary enamels based on pentaphthals (alkyd resins), the components of which create a smooth moisture-resistant decorative coating on the base.

The disadvantage is that a pungent odor will float in the air for about two days when it dries. Another option is to use acrylic enamels. They do not have a pungent odor and dry out within 1-3 hours. But the price is almost twice as high as compared to PF enamels.

The junction of the bathtub with the walls is sealed by means of plastic elements or ceramic borders.

The finishing price will be about 2000… 3000 rubles.

Wallpapering

For damp rooms are used vinyl wallpapers with a moisture resistant coating, - "washable". The surface of the walls, especially with brick uneven partitions, must be carefully leveled in order to give them flatness.

The disadvantage of this type of finish is the ingress of moisture on the seams between the wallpaper, sooner or later leads to the peeling of the coating.

The use of decorative finishing material based on fiberglass will help to avoid such a nuisance, and significantly extend the service life.

Estimated costs are 2000 ... 6000 rubles.

Covering with sheet panels

The sheet size of PVC (polyvinyl chloride) panel is 1 x 495 x 955 mm (thickness, width, length). They are produced in a variety of colors and textures.

A fairly flat surface is required for these products, so the leveling with plaster should be more careful than with paint. Instead of painting operations, panels are glued.

The decorative material is fixed to the wall by means of glue from a series of "liquid" nails used in damp rooms and containing antiseptic additives against mold and mildew. It is possible to use polyurethane foam. Panel processing is carried out with scissors or a utility knife.

The cost of fixing works will be 4000… 6000 rubles.

Another budget option from the series "how to decorate a bathroom cheaply" is the use of traditional plastic panels, which are products in the form of a board.

Application of plastic panels

The plastic panel is made of PVC and structurally looks like a board with a width of 100 ... 500 mm, a length of 2600 ... 3000 mm. The section shows that there are stiffening ribs between the two sheets, which give the product strength and lightness.

The panels are fixed in several ways:

Fastening to a wooden, metal or plastic crate with clamps, self-tapping screws or staples from a furniture gun,
Bonding on adhesives from a series of "liquid" nails

Installation on polyurethane foam.

In the latter case, the procedure for leveling the walls can be omitted - this is due to the properties of the foam, which expands and fills the void between the wall and the panel.

The joint between the panels and the bathroom itself is sealed with silicone sanitary sealant or by means of a flexible plastic skirting board.

The approximate amount of expenses is in the range of 5000 ... 7000 rubles.

The above finishing options were considered for cases of independent work. With hired labor, the cost of expenditures approximately doubles.

Finishing a bathroom in inexpensive and cheap solutions completely depends on what materials, who will be, and how will carry out the finishing work.

Share this article with your friends on social media. networks!

How to decorate a bathroom cheap: choosing available materials
The article will tell you about how and relatively inexpensively you can sheathe a bathroom.

Even with a small budget, you can make a beautiful and practical bathroom. When purchasing a new home or a long stay in the old one, it becomes necessary to repair it. Any updates are associated with costs that even the most economical person cannot always afford. In the absence of a significant amount of money, it is not at all necessary to postpone the replacement of damaged finishes on the back burner. It would be wiser to plan budget repairs using inexpensive but high quality materials. And you should start with the bathroom, which is one of the most important rooms in the house.

How to start an inexpensive bathroom renovation

Repair, like any change, begins with getting rid of the old and unnecessary. And this process can be called the most pleasant and easiest part of the work: coverings that have outlived their days can be safely removed from the walls and ceiling without worrying about their safety.

Cleaning the premises is carried out in several stages:

Disconnecting plumbing,
Removing old coatings from walls, floors and ceilings,
Removing previous layers of plaster, screed and waterproofing residues,
Cleansing the room from dirt and dust.

When planning to make repairs in the bathroom, the first step is to choose a finishing material for the floor and walls.

After getting rid of debris, all surfaces must be leveled with cement mortar. It is imperative to seal the cracks with a sealant.

An obligatory step is waterproofing the room. For the floor, you can use a plaster, which is applied to the screed in one or two layers.

Do-it-yourself cheap bathroom renovation: material requirements

The bathroom is characterized by a special microclimate, which leads to the rapid deterioration of materials. Therefore, when making even low-budget repairs, it is worth choosing a finish whose performance meets the requirements.

The materials used must have the following properties:

Resistant to high humidity,
The presence of antiseptic additives that prevent the appearance of fungus and mold,
Resistant to aggressive compounds used to clean the bathroom,
Ease of care.

When buying materials for a bathroom, you should ask the seller for a certificate confirming their quality.

The best option for the bathroom is smooth surfaces. Due to the absence of irregularities and various volumetric patterns, the material does not accumulate dirt on itself, retaining its original appearance for many years.

When choosing a finish, you should also pay attention to the possibility self-assembly... A simple DIY repair will require less costs (approximately twice).

How to paste a cheap bathroom over: decorate the walls

A significant part of the cost falls on the design of the walls, which have the largest area when compared with the rest of the surfaces being trimmed. One of the options for the "economy" class is wallpaper, but before you paste over the bathroom, you should think carefully. This type of finish is very unstable to high humidity in the room.

Painting with a water-repellent emulsion is the cheapest way to decorate walls. For finishing, a special compound on a polyester or acrylic base is used, which is applied to the surface after it has been leveled. The paint lasts for 5 - 8 years.

In the bathroom, you need to choose tiles of such a color and texture so that it is harmoniously combined with other finishing materials and pieces of furniture.

Among the budget options, the following types of finishes also have the necessary properties:

Plastic panels,
Ceramic tile.

PVC panels are an inexpensive material that saves not only finances, but also time. Plastic strips, fastened together, do not require preliminary leveling of the walls and removal of old finishes. Installation of panels is done quickly and will be within the power of even a non-professional.

If you want to design a small bath inexpensively, you can also consider laying wall tiles. This material is resistant to moisture and mechanical damage, has a huge number of colors. The tiled bathroom looks nice and tidy. A small budget in this case will not be a problem: you can purchase domestic products that have more affordable prices.

Bathroom renovation options: how to finish the ceiling and floor

The ceiling can be decorated in the same way as the walls. For example, paint with white paint or install plastic panels. This option is the most economical and practical.

For a small bathroom ideal solution may be installation tension cloth... The cost of such finishing depends on the area of the room, so the installation of a false ceiling in a small restroom will be cheaper than other options. Especially if you abandon the idea of a designer canvas and make a matte white.

PVC panels are well suited as a finishing material for the ceiling.

Finishing the floor is the most important task on which the safety of the use of all plumbing depends. That is why experts recommend first of all to update the waterproofing in the room, and only then to repair the coating itself.

For finishing the bathroom floor, two materials are suitable that have high durability and a variety of designs:

Linoleum will cost less than tiles, but if we are talking about a small bathroom or toilet, there will not be much difference in their cost. Therefore, the choice of coverage in this case depends on personal preference. However, it should be borne in mind that the installation of linoleum is quite simple and done by hand, which also significantly reduces costs. Having given preference to tiles, you will have to work hard with laying it. Or finish the floor with the help of a specialist.

Repair of a small bath: we update the plumbing

Buying a bathtub and sink is the biggest expense in a renovation. However, you can save money in this case too. The solution to the problem will not be the purchase of new equipment, but the restoration of the old one.

If the bathroom is small, then when decorating it, it is worth using materials and furniture of light shades.

The update is carried out in two ways:

Application of two-component polyester enamel on the inner surface of the bath (the cheapest option),
Restoration with liquid acrylic (it will cost more, but the result will be more durable and beautiful).

If the bathtub is in a completely deplorable state, you can purchase an acrylic insert. This is a special insert that is attached to the inside of the bowl with a sealant.

The listed methods may not seem budgetary, because are not very cheap. However, in any case, it will be beneficial to restore old bath than buy a new one.

Self-repair of the bathroom can be done with almost any income. It is only important to carefully plan the entire process and purchase necessary materials. Modern market offers a variety of finishes, so it will not be difficult to choose a high-quality coating of low cost. The main thing is not to get carried away, trying to save as much as possible: you need to pay attention not only to the price of the material, but also to its properties.

We do budget repairs in the bathroom: inexpensive options for decorating a room
Budget renovation in the bathroom requires careful preparation and selection of materials that meet all the requirements. Read more about the types of inexpensive finishes and ways to save money during renovation in bathrooms.

The question of how to decorate a bathroom cheaply worries many people in our country. Average salaries do not allow making expensive repairs in the apartment and are forced to resort to looking for a budget option. For some reason, some of them believe that their dream cannot be realized, but in fact it is not. It is possible to achieve aesthetics, comfort, durability and safety of the planned renovation using even relatively inexpensive materials. How to do it?

How to save on materials without losing quality?

It should be understood that the expensive is not always of high quality, and vice versa. The high price may be due to, say, the possibility of using in special situations whereas your conditions do not require such dedication. Significant remoteness of the store from the production facilities of the manufacturing company can increase the cost. Sometimes you have to overpay for a well-promoted brand. One should not exclude the difference in living standards in different countries- if a product is produced in a state with high average incomes of the population and high salaries for all employees, then residents of all other countries are forced to dump on this very exorbitant salary if they want to buy a specific product. In general, to decorate a bathroom cheaply, you should approach the task wisely.

The high price of finishing materials does not always indicate their quality, so if there is no desire to overpay, you need to choose wisely

Economical glue

Let's start with a simple one - with a tile, or rather, with glue for it. Tile is one of the main materials for decorating walls and floors in a bathroom, and if it is often not worth saving on the tile itself, then they often overpay for glue. Consumers often give preference to the famous Ceresit glue, refusing the cheaper Moment, not even suspecting that both trade marks belong to the same company. Of course, the two options differ in terms of the range of hardness, however, for ordinary home repair, there is usually no difference. If there is still some sense for the walls to purchase more expensive consumables, then the tiles will not fall off the floor even with the Moment, unless you arrange a dance floor in the bathroom.

Wall decoration

At first glance, it is obvious that the most expensive tile options may look more prestigious, but those who want to save money are often interested in another question - is there a difference in strength and durability? It should be noted that usually it is still not there - you can decorate the walls with cheap tiles for decades to come.

The difference in price is usually due to the attitude towards appearance - if expensive models are a real masterpiece, the budget options often seem to be made somehow, but more often than not this is just a visual deception.

The manufacturer can also save on non-slip coating, but if the finish is chosen for the walls, then this is not too important. Another thing is that laying tiles usually requires the involvement of professionals, therefore, in any case, this is not the cheapest option.

You can save a lot, getting approximately the same result, if you decorate the walls of the bathroom with plastic panels. In terms of a variety of colors, they are not inferior to tiles, but they are much cheaper and much easier to install. Unlike tiles, damaged fragments are much easier to replace, besides, communications can be hidden under the panels. The installation of panels does not require leveling the wall, however, due to additional fastening profiles, the area of the bathroom may slightly decrease.

Plastic panels - an economical option for finishing the bathroom

Of course, the most cost-effective repair option is painting the walls. Even the most expensive paint will cost the owner less than the same plastic panels, especially since even a child can do the job, because the only thing that really needs to be done is accuracy. However, this option is very limited in use - if the walls are crooked, then you will have to abandon it. Of course, the wall can be leveled, but it is not easy to bring it to the ideal on your own, and the call of a specialist forces you to delete this design method from the list of inexpensive ones.

Floor decoration

For the floor, tiles are also an ideal option - although they are expensive, they are still optimal in terms of practicality and durability.

The most practical option floor covering bathroom tiles are considered, the cost of which varies in a wide range

In classic competitors, linoleum usually goes, but it should be borne in mind that an attempt to purchase a cheaper version of it is fraught with the rapid destruction of the repair - the material does not perceive constant moisture well.

Actually, the most budget-friendly solution for renovating the flooring in the bathroom is simply to lay a new rug, if possible, matching it to the walls and the rest of the finish. At the same time, in order to avoid the appearance of mold, the mat should be regularly lifted and the floor under it should be wiped.

Ceiling and lighting

Repairing the ceiling surface in a bathroom on a limited budget involves the use of plastic panels that allow spotlights to be built into the ceiling.

Plastic panels on the ceiling in the bathroom

but lighting can be left on the wall, the main thing is to place them correctly.

A competent approach to the layout of the premises, as well as cleanliness and order will make it visually attractive and worthy of dear guests.

Plumbing

It is undesirable to save on plumbing and pipes, because any accident will force the owner to start repairing the bathroom from scratch. The quality should be maximum, just sometimes it makes sense not to buy new plumbing, but to restore the old one. If the bath has not lost its integrity, but has problems with the enamel coating, then it is better to renew it - modern materials allow for all kinds of restoration of the enamel, and it is much cheaper than buying a new bathroom bowl.

When making repairs in the bathroom, it is not necessary to purchase new plumbing fixtures, you can simply restore the old one

The option is not excluded and the purchase of equipment that has already been in use on the market - construction companies that carry out regular repairs in public institutions (for example, hotels) can hand over the removed plumbing for resale. At the same time, before implementation, it usually undergoes restoration to a normal functional level and costs significantly less.

Final details in bathroom decoration

When the interior is almost ready, it remains to add the final touches that will make the room ready for use as intended - it comes about the curtain, shelves and hangers.

Accessories for the bathroom can be purchased the simplest and most inexpensive, this will not make its interior worse

The curtain can be found at very low prices if it is made from film or inexpensive fabric. If there is an opportunity to invest a little more money now, in order to invest less later, it is worth overpaying a little for a curtain made of waterproof fabric - it will more reliably protect against splashing water and will last longer. It is important to choose a beautiful design of the accessory, and then its low cost will not seem obvious.

As for the shelves and hangers, you just need to place them correctly, falling into the general color scheme. If neatness and order reign on the shelves, the guest will not notice much difference between expensive and cheap accessories, and vice versa - there is no point in overpaying for the shelf if the appearance of the jars on it raises vague doubts about the owner's solvency.

How to decorate a bathroom cheaply: what can you save on?
How to decorate a bathroom cheaper. What is worth saving and what not. How not to overpay for plumbing. A budget option repair of walls, floors and ceilings.

The bathroom is one of the most difficult rooms in the house in terms of renovation works despite the limited area. When choosing finishing materials have to constantly remember high level humidity. Wrong - the textures and colors of the finish make the compact space even smaller. The question arises: how to cheaply make repairs in the bathroom with your own hands, so that it turns out correctly and beautifully?

Choosing inexpensive materials

Is it planned redecorating or a global reconstruction of the premises, you can always save on materials.

1. Floor. Linoleum is the cheapest floor covering, especially if you choose a roll of the optimal width (3-5 meters), preventing the appearance of large residues. However, the material cannot be called durable, stable humidity can lead to mold. A practical solution- tiles, the most affordable are plain products.

Walls. If you want to save money, you can opt for plastic panels. They cope with significant mechanical stress, are easy to maintain and install. An alternative choice, not inferior in practicality to paneling, is a budget plain tile.
Ceiling. Inexpensive options are a suspended ceiling, coating with moisture-resistant paint. If waterproof paint is selected, the cost estimate must include filler leveling.

Important. It is definitely not worth saving on plumbing if you cannot do without replacing it. Sudden exit poor quality equipment failure will negate all efforts and spoil relations with neighbors. You can choose other materials, for example, abandoning tiles in favor of a textured plaster coating.

Preparatory work

Preparatory work includes dismantling old plumbing, removing old finishing materials, waterproofing, leveling, laying communications. Depending on the "globality" of the repair, this list may change.

Dismantling plumbing

Even if replacing plumbing is not part of the plan, it is best to temporarily remove the tub and sink before doing budget repairs yourself. It may also be advisable to remove the door.

Dismantling of coatings

An obligatory part of preparing a bathroom for renovation is the removal of old coatings.

- It is convenient to knock down a tile, armed with a perforator. You should definitely beat off the plaster if it moves away from the wall.

You will need a metal brush and a spatula to get rid of the paint.
It may be necessary to replace the screed under the tiles if large cracks are present. It is convenient to clean the floor down to the concrete base using a hammer drill or chisel.

Video guide to removing old tiles:

Attention. It is definitely worth assessing the condition of the sewer and water pipes. Replacing them after renovation is a difficult task.

Surface preparation

The next stage of work combines the arrangement of a leveling screed, a primer.

- The base of the floor is thoroughly dedusted, cleaned and primed.
- To create waterproofing, a special film is required. The material is laid on the floor with the institution on the walls.
- An alternative to film is to apply mastic with a roller or flat brush. The composition covers not only the floor, but also the lower section of the walls.
- A leveling screed is made on top of the waterproofing.
- For plastering the walls, a special composition is being prepared - 1 part of cement (M400 and above), 4 parts of quartz sand (sifted).

Advice. To make the mixture more plastic, it should be diluted with a PVA emulsion, using one tenth of the volume of water in the solution.

Perforated strips - beacons - are placed on the walls in front of the plaster. They are mounted on tile adhesive, wood cork or cement-sand mortar.
You can abandon the plaster in favor of plasterboard finishing, not forgetting the treatment with waterproofing mastic. Also, the walls under the sheathing should be treated with an antifungal agent.
For fixing moisture-resistant drywall, special glue (for example, "Pearlflix") or a metal profile is used.

Attention. If the decision is made to do without tiles, the choice is made in favor of plastic panels, alignment is not required. It is very important to treat the walls using a fungicide or quartz lamp.

Laying of communications

Replacing pipes is a manipulation that follows the dismantling of the old coating. You will have to decide for yourself what to do if the goal is to make repairs in a small room quickly, change or not change pipes. Leaking old communications will make new repairs necessary.

video on replacing pipes in the bathroom:

In addition to replacing pipes, it is worth installing new wiring. It is necessary to determine a place for electrical appliances, provide the required number of sockets, replace the switch and wire.

Wall decoration

Tiles and wall panels are two of the most economical options for.

Wall cladding with plastic

The technology of wall cladding with plastic, if you bring it step by step, is as follows.

The optimal frame for wall panels is pine timber (30 by 30, 25 by 30). To prevent wood rotting, you need to treat the material with special compounds before installation.
The frame is fastened by means of self-tapping screws, holes with plastic sleeves drilled in concrete are preliminarily prepared.
This is followed by the fastening of the panels, you can use a special stapler or resort to the same screws.

Advice. Fastening with self-tapping screws or a stapler will result in an unsightly bulging of the fasteners. The most aesthetic option is liquid nails.

Wall cladding with tiles

Before making an inexpensive renovation, it's best to calculate the number of tiles. This can help. The top row cannot be cut, a preliminary calculation will help save on alterations.

Important. The material is calculated so that the tiles have the same width around the edges of the wall. This is an indispensable condition, without which a beautiful repair is impossible.

Spacer crosses must be installed between the tiles. The ideal thickness for a bathroom is 3 mm.
As soon as the tile is set, the spacer crosses are removed from the seams, the surface of the walls is thoroughly cleaned with a natural dry cloth.

Grouting

The consistency of the grout should resemble warm butter. For this, it is premixed with water.

A soft rubber trowel is best for grouting.
After applying the composition, you need to wait 20 minutes, then process the seam with your finger (gloves are worn). This manipulation will provide a deepening of the seam.
The final stage is wiping the grout, this action should be carried out in an hour. You cannot postpone the procedure for the next day.

Sealing corners

There are several ways that you can improve the appearance of joints in the toilet and bathroom.

1. The corners are rubbed parallel to the seams. The disadvantage of this technique is the difficulty that self-taught craftsmen face when grouting. inner corners... The mortar is on the tile, the seam looks sloppy.

Advice. Masking tape is glued on both sides along the corner. The corner is filled with grout, the composition is leveled with a finger. Then the tape is removed, the result is a smooth, neat line.

White silicone sealant. Practically similar manipulations with grouting are made. The advantage of the sealant is color retention.
Plastic corners, they can be external or internal. When choosing the thickness of the products, you need to know the exact dimensions of the tiles.
Combined option. Plastic corners are used for outside corners, sealant or grout for inside corners.

Important. The connection points of the tile with the toilet and sink must be filled with silicone. This avoids the formation of dirt.

Floor and ceiling finishing

Working with the floor and ceiling is in many ways similar to the manipulations performed when decorating walls. However, there are still some differences.

Floor finishing

Floor tiles are the best choice for those who are interested in the question of how you can make repairs beautifully and cheaply.

The floor, leveled with a screed, is covered with tile adhesive... The recommended application area is 0.7-1 sq. m, this is due to the instant drying of most compounds.
The tiles are laid on the floor, carefully pressed to the floor and tapped with a hammer with a rubber nozzle. Direction - to the edges from the center.
The correctness of laying is checked by the level before the glue dries.
In the last turn, trimmed products are mounted - around the pipes, around the perimeter of the room.
The seams are rubbed, the flooring is cleaned.

Ceiling decoration

The most budgetary options for ceiling design are suspended structures, putty. The putty is relevant, if the area of the bathroom leaves much to be desired, the material is applied to concrete slab... A plasterboard or lining ceiling is installed by analogy with a wall.

The final stage

The bathroom renovation is almost over. All that was left was to install plumbing fixtures, accessories and furniture.

Installation of plumbing devices is most convenient to carry out after the completion of finishing work. This will provide full access to all surfaces of the room and keep old or new plumbing from damage.
Doors are installed after plumbing, so that they do not suffer during the process of bringing it in. Then all kinds of hooks, lighting fixtures, mirrors and other little things are attached.

Doing your own bathroom renovation is the best way to save money.

In the event that you do not feel the strength to repair the bathroom yourself, professional teams will come to the rescue, who will make the repair quickly, efficiently and inexpensively. On our website, you can quickly calculate the cost of repairing not only your bathroom, but the entire apartment.
Unfortunately the service is still working only for residents of Moscow, the Moscow region, St. Petersburg and the Leningrad region:

Organizing a budget bathroom renovation with your own hands is a doable task. The correct strategy in the choice of finishing materials and a clear understanding of the progress of work will allow, even with a modest budget, to transform the bathroom without sacrificing quality.

Organization of the process

Proper planning is the first step towards successful completion. Most of the work in the bathroom with a budget renovation can be done by hand. Even a novice master can remove old coatings, dismantle plumbing or paint.

But if experience in wall cladding with tiles is not enough, you should think about inviting specialists to certain areas of bathroom renovation. Do not overestimate your strengths and capabilities. Sometimes reworking your own mistakes will cost more than inviting a master initially.

When the work on the renovation of the bathroom is distributed, they move on to the choice of finishing materials. It is better to refuse well-known import brands. A significant part of the cost is the payment for the brand, which looks impractical with a budget repair option. The cheapness of Chinese goods is also not the best option.

Advice! Stop at a domestic manufacturer or an assortment from Poland, Slovenia and Bulgaria.

This applies to both finishing materials for the bathroom and plumbing. The combination of reasonable cost and good quality is a distinctive feature of the offered products.

An important condition for a high-quality result when doing budget repairs with your own hands is compliance technological process... If any stage of the work is in doubt, listen to the recommendations of experts, improvisation is sometimes inappropriate.

Redevelopment of the bathroom automatically increases the repair estimate at times, so there is no need to talk about a budget option. Leave your ideas for moving walls or plumbing to another place until better times when there are no financial constraints.

The amount of preparatory work to remove the old cladding depends on the choice of new materials. Sometimes this stage can be avoided. Mandatory dismantling of plumbing is required if the plans are to replace it.

Wall decoration

An economical bathroom renovation includes several wall finishes:

staining;
installation of PVC panels;
wallpapering, including self-adhesive foil;
facing with tiles from the budget segment.

Each method has undeniable advantages and some negative aspects.

Dyeing

Wall covering with paint is the leader among economical finishing options due to its simplicity and low cost. A competent approach to the choice of paint and high-quality preparation of the walls is the beginning of the path to success.

Advice! It is not recommended to completely cover the walls of the room with paint.

A project where areas near the sink and bathtub are lined with inexpensive tiles or moisture-resistant PVC panels is more effective.

Moisture resistance and antibacterial properties are prerequisites when buying paint, otherwise it will not be possible to avoid the development of fungus and peeling of the coating in the bathroom. High performance characteristics against the background of budgetary cost are inherent in paints:

latex;
acrylic;
silicone.

The absence of a pungent odor is a definite plus water emulsion compositions, and silicone paints perfectly serve as a hydro-barrier. It is better to refuse the use of oil mixtures. After a short time after the renovation, the walls of the bathroom will be covered with cracks.

When making an economical bathroom renovation, remember that paints with an attractive glossy effect accentuate any unevenness in the walls and make all defects more visible. Therefore, careful alignment of the walls is imperative. Plus gloss - the ability to visually increase the space of a small bathroom.

Often, during renovations, the old paint coating needs to be removed from the walls of the bathroom. This can be done in several ways:

use a drill with a special grinding attachment;
purchase a liquid for removing paint, in the process of work you will also need a spatula and a scraper;
use thermal methods, when the old coating is heated with a building hairdryer or a burner, and the swollen paint is cleaned off with a spatula.

Naturally, at the end of the removal process and before the start of staining, the whole complex of measures is carried out: sealing cracks, eliminating protrusions, priming.

In the photo, a bathroom with a budget do-it-yourself repair:

PVC panels

You can repair the walls of the bathroom with PVC panels. In terms of cost, this will cost a little more than purchasing paint, but the method has two clear advantages:

The appearance of the bathroom after a budget renovation with the use of PVC panels is incomparably better in terms of design.
No careful preparation of the wall surface is required.

The process of installing panels does not contain complex steps and is available for doing it yourself. After calculating the need for material, the crate is formed. For these purposes, plastic profiles with clips are used. For an economical bathroom renovation, wooden slats are also suitable. Pre-impregnation of the material with antiseptics will protect the slats from increased moisture.

Wallpapering

The option of repairing a bathroom using wallpaper also has a right to exist, the main thing is to choose moisture-resistant products. The work is being carried out at a fast pace, the removal of the old coating is not required in all cases. There are 3 main types of wallpaper for use in the bathroom:

Vinyl with non-woven backing. The price is quite high; repairs will require the purchase of special glue, which is not always advisable in an economy project. But high performance is the foundation of consumer popularity.
Washable. Compared to vinyl copies, they are less practical, the cost of the product is correspondingly lower.
Remark! When doing repairs with your own hands, it is advisable to avoid pasting over areas of the bathroom that may get water.
Self-adhesive film. An incredibly practical material that is initially provided with an adhesive layer. A wide range of design solutions can create a wonderful transformation with a bathroom after renovation.

High quality and attractive appearance of self-adhesive are accompanied by 3 negative points:

Quite a high cost of the product, which may not fit into the budget repair estimate.
Bathroom walls require careful preparation, as any flaw under self-adhesive wallpaper will be extremely noticeable.
Quite a complicated application process. The painstaking process takes much longer than standard pasting.

Tiling

Budget renovation also includes the use of wall cladding tile... The main thing is to choose an inexpensive product with decent quality. Solution advantages:

the material is resistant to temperature extremes;
not afraid of high humidity, withstands prolonged contact with water;
washes well;
resistant to mechanical damage.

The following negative points can be an obstacle to use in the bathroom when carrying out budget repairs:

additionally, you need to purchase a mixture for fixing on the wall and a grouting joint;
walls with old paint need preparation, the coating must be removed;
the process requires some experience and not everyone can do it with their own hands on their own, the invitation of the master will increase the estimate of the repair;
lining takes longer than wallpapering or painting.

The best option when carrying out a bathroom renovation with a budget project is to combine cladding. The area near the bath and sink is decorated with tiles, and for those less exposed to water, they choose a simpler and economical way cover.

Ceiling decoration

Scope of work on budget finishing the ceiling depends on its original state. It is enough to cover a smooth surface water-based paint or whitewash. Idle and quick process can be done by hand. It is recommended to remove significant curvature or mask the bathroom communications with a suspended structure. Rack elements or PVC panels are suitable as a material.

The main advantages of the choice:

affordable price segment;
simple veneering procedure;
does not require perfect preparation of the bathroom ceiling surface;
successfully mask wires and pipes;
the possibility of installing built-in lamps is provided.

The result of a budget repair is shown in the photo:

Floor covering

The finishing option depends on the repair estimate and the condition of the old bathroom flooring. Sometimes just freshening up the look of the tiles is enough. To do this, you will need to remove the grout and select a new one that matches the color of the tile.

It is quite simple and cheap to lay linoleum, but this measure will be temporary. The increased level of humidity in the bathroom provokes the development of mold on the linoleum.

Comment! To avoid negative consequences during budget repairs, the purchase of linoleum based on PVC or even without a base will allow.

Tiles are more practical when renovating a bathroom, even if they are of a budget. The cladding is carried out without dismantling the old tiles. The screed will require labor and time. To repair the bathroom floor, choose tiles with a rough texture in order to avoid slipping and not provoke injury.

With an extremely limited budget, the most economical option would be to purchase a large rubber mat, which will maximally cover the free space of the bathroom floor. It can be changed much more often than any stationary coating, and fresh look interior design at minimal cost will be provided.

The nuances of choosing plumbing

Plumbing replacement in the case of budget repairs is not always carried out. Sometimes they stop at the option of restoring the bath. There are several ways to update:

The inner surface is finished with a two-component polyester enamel. The most budgetary reception.
Recovery with liquid acrylic is characterized by greater durability and cost.
Sometimes both methods are unacceptable due to the deplorable state of the bath. An acrylic tab will save the situation, which is fixed with a sealant.

Each of the methods still implies financial costs, although they will be incomparably lower than purchasing a new bowl.

If a budget repair involves the purchase of new plumbing in the bathroom, consider the following options:

Acrylic container. Located at the bottom step price segment... Easy installation and easy maintenance are the key benefits of a bathroom product. A short service life and instability against mechanical damage are the main negative features.
Cast iron is more practical. The cost is higher than acrylic counterparts.
Steel bathtubs in terms of their characteristics are located between acrylic and cast iron products.
If the presence of the bath itself in the bathroom is not essential, you can think about installing a shower cabin. But the renovation will already go beyond the budget.

When replacing the sink in the bathroom, choose between equipment on hooks or on a leg. The first option is more budgetary, the second has more aesthetics, as it successfully masks communications. The nuances of choosing plumbing and the preference of a domestic manufacturer were discussed in the first section.

Conclusion

Small trifles are capable of embellishing the interior of a bathroom after a budget renovation. An original curtain, decorative stickers and new accessories will enliven the design of the room. Communications are not left open, they will spoil the result of even the most expensive bathroom renovation. Budgetary way quickly hide the functional elements of the furnishings - form a plastic box. It will take a little time and costs, and the result will be obvious.

Everyone knows the old saying that if you want to do something well, do it yourself. Before renovating a bathroom, many want the whole event to be inexpensive, while at the same time wanting to get quality and a beautiful appearance. However, not everyone can make high-quality repairs on their own due to lack of the necessary tool, free time or experience. In this article, we will look at how to inexpensively decorate a bathroom, what materials to use in this case, and learn a few useful tips from specialists. Before you start planning an inexpensive bathroom and toilet renovation, you need to clearly understand what end results we want to achieve in the end. Typically, the purpose of a repair is:

creating a beautiful interior;

safe operation of plumbing and furniture;

creating comfort and increasing functionality;

preventing the appearance of mold and fungal bacteria;

the longest service life of the materials used.

Economical repairs in the bathroom can be done using inexpensive materials, while observing all of the above points, if you plan everything correctly and choose the right material.

How to choose budget building materials

Today the industry produces Construction Materials of all kinds of price categories, designed for consumers of very different levels of income. These can be goods of economy, standard and elite classes. There are also very cheap materials on sale, but their advantage is only in their low price. The quality and appearance of such products do not stand up to criticism. Many works can be done independently without the involvement of specialists. For example, filing the ceiling with plastic clapboard does not require any special skills. Plumbing installation is also not difficult. Toilet bowl, bathtub, washbasin - all this can be assembled by yourself. It is only important to take your time, carefully study the assortment, calculate all stages of the work performed, then a successful result will be ensured.

As for building materials, it is more advisable to choose goods of economy class and standard price segment. Both of these types of materials practically do not differ in quality. The same manufacturer may manufacture similar products under different trademarks. The first will be considered a standard class product, and the second - an economical option, and they will differ only in cost. World standards provide for certain quality criteria, for example, the density of building mixtures for solidification must not be lower than a certain threshold. For economical materials, this indicator will be closer to the lower value. This statement is true for consumables. As for finishing materials, plumbing fixtures and other things, low price not at all synonymous with poor quality. It is only necessary to take into account the mode of loads to which the product will be subjected. For example, floor tiles should be stronger than wall tiles. At correct selection and installation of tiles in the bathroom can last more than fifteen years. If you have decided to carry out a budget bathroom renovation, you should not purchase elite class building materials. Their quality is not higher than that of budget products, and they benefit only due to their aesthetics. It should be understood that the expensive is not always of high quality, and vice versa. The high cost may be due, say, to the ability to apply in special situations, while your conditions do not require such dedication. Significant remoteness of the store from the production facilities of the manufacturing company can increase the cost. Sometimes you have to overpay for a well-promoted brand. One should not exclude the difference in living standards in different countries - if a product is produced in a state with high average incomes of the population and high salaries for all employees, then residents of all other countries are forced to dump on this very exorbitant salary if they want to buy a specific product. In general, to decorate a bathroom cheaply, you should approach the task wisely.

Materials for wall decoration

1. As a rule, under good repair bathroom most implies finishing with tiles. Pros: Aesthetics and agreement. The variety of textures and shades gives almost endless scope for design solutions. In addition, the tile is not afraid of almost any external influences and can serve almost indefinitely. Minuses: This material is the most expensive. And not only because of the cost of the tile itself, but also due to the complexity of the preparatory work. The walls will have to be properly cleaned and leveled. In addition, the laying of tiles itself is an expensive and laborious process that requires special skills.

2. Another option: covering with moisture resistant paint or special self-adhesive film. Pros: Profitability. Minuses: An even more thorough cleaning and leveling of the walls will be required, since the slightest irregularities will catch the eye. But even with the most scrupulous approach, the appearance of such a coating will be very far from perfect. And these materials will not last long. 3. Inexpensive and very practical option – PVC panels. Pros: The choice is huge, you can choose a design for every taste. You can fix them on the walls with "liquid nails" or a special frame-lathing. In the first case, again, you will need to align the walls, and replacing the panels, if necessary, will not be easy. But the second option does not require any special training. Plastic mounting strips are attached to the walls, and on them - with the help of special clips - the panels themselves. Even a non-professional can easily and quickly cope with this task. PVC panels are not afraid of constant humidity and are easy to clean. Minuses: They cannot withstand serious mechanical damage. The cheapest can emit an unpleasant smell for a long time, and over time - turn yellow, so it is better to choose not the most "cheap" ones.

Dismantling the old cladding

Do not forget to take out all the furniture from the bathroom, remove the mirrors, seal the faucets with masking tape, and cover the plumbing with plastic wrap or newspapers, because preparing the walls for painting is the dirtiest and most time-consuming stage. The first step in a bathroom renovation is to dismantle the old wall and floor cladding. It is performed with a hammer and chisel. In this way, old tiles and plaster are removed, preparing the walls for renovation. It is very important to purchase a special putty designed specifically for the walls and ceiling of the bathroom. This putty contains a special disinfecting composition that prevents the appearance of fungus due to high humidity. For the putty to work comfortably, it must be fresh and of high quality. After the walls are leveled and dried, decorative plastic panels, mosaics or tiles can be used. The ceiling is carefully leveled for subsequent painting. It is not scary if a little putty remains, it can be stored for several months in a closed container. You should not apply new layers of paint over the old peeling ones, nothing good will come of it. If you have a drill in your arsenal, purchase a pair of grinding attachments and wipe off old paintwork from the walls. Remember safety precautions. Use paint strippers, a scraper, and a spatula. The method is effective, but it is better to work with a respirator and thick rubber gloves.

The paint can be removed by thermal methods, for example, using a burner or a hairdryer. Heat the wall section and scrape off any loose coating with a narrow trowel. When all old paint will be removed from the walls, it is necessary to repair cracks and potholes, knock down the protrusions.

DIY wall painting

Wall painting is considered one of the easiest and least expensive finishing methods. It is important to choose the right paint and prepare the surface of the walls. Bathroom paint must be antibacterial and moisture resistant. Otherwise, the appearance of fungus and flaking of the coating cannot be avoided. The most widespread, due to their low cost and excellent performance characteristics, are latex, silicone, acrylic paints. At the same time, water-based mixtures do not have an unpleasant pungent odor, and silicone paints can act as a hydro-barrier. Traditional oil paints are deprived of such dignity, and also quickly become covered with cracks, so it is better to refuse such an option right away. When choosing shades, remember that it is inappropriate to paint small bathrooms in dark tones, as visually this will further reduce the space. Do not overdo it with the number of bright spots or complex patterns and their number, so that the interior does not look vulgar. Soft pastel shades visually expand the room and fill it with light.

Please note that paints can be matte, glossy and semi-glossy. Of this variety, it is matte enamels that hide small defects on the walls best of all, while drops and streaks are clearly visible on glossy surfaces. However, if you can't make a choice, consider combining glossy and matte surfaces. This technique will allow you to make the bathroom modern and stylish without significant costs.

Wall decoration with tiles

Thinking about how cheap to renovate a bathroom, with a budget renovation, you probably won't consider expensive Italian tiles of increased strength with a non-slip coating and the ideal geometry of each product. It is also important to take into account the manufacturer's policy, which is similar to the situation with the glue described above. Considering a cheap bathroom renovation, we do not take into account the elite tiles made from special types of clay with all kinds of additives and additives, but we are looking at products of the budget or middle class. In the overwhelming majority of cases, tiles of the middle or low price category do not differ in any way in their composition. Inexpensive bathroom decoration made of cheap tiles differs only in the appearance of the glaze. Of course, products of the middle category have a wider range of shades and a variety of texture solutions. In this case, when repairing an economy class bathroom, you should not chase after a chic appearance, you can do with more restrained solutions, but beat them very worthily.

To work with this material, you also need a special tool, certain theoretical knowledge and, of course, practical experience. To make repairs in the bathroom yourself using tiles, without the necessary knowledge and tools, of course, will not work.

Decorative plastic panels

When renovating a bathroom, the greatest costs usually go to the purchase of tiles and wall and floor cladding. Decorative plastic panels can be used as an alternative to ceramic tiles. This is a great way to economically update your bathroom and get a very presentable interior. Calculate the number of panels required, make a margin of 5-10%. If you have little experience, and the bathroom has a lot of utilities, for the closure of which you will need to trim panels, then take a margin of 10%. Simultaneously estimate the number of starting profiles, outer and inner corners. They are sold in a standard length, cost a penny, there is no need to save. The panels are mounted on special crate that is drilled to the walls. Due to the ease of processing, the panels do not cause much trouble home master and their installation rarely takes more than a day or two. We fix the elements in one plane: 1. Check the condition of the wall with a plumb line, pay special attention to the attachment points plastic profiles or slats. 2. Fix the two end elements under the level, re-check their position. If there are large recesses at the attachment point of the profiles, then use washers made of various materials... The dowels should attract the profile over the entire plane, there can be no gap between it and the wall at the attachment point. 3. Pull the ropes between them, two at the ends of the profiles or rails are enough. 4. Install all other profiles under the rope, using it to control the position of the rails. Then, along the perimeter of the room, a decorative plinth is attached to the floor and ceiling, capable of masking possible flaws in the cut edges of the panels.

Wall decoration with wallpaper

Only waterproof types can be used for wallpapering. This finishing method has a number of undeniable advantages. Low cost allows you to have an exclusive and reliable coverage with small material losses. High manufacturability. Of all the possible ways to decorate the walls in the bathroom, wallpapering is the simplest. The work is completed within a few hours, the premises can be used as intended the very next day. It is possible to frequently change the design of the premises. In some cases, re-pasting can be performed without removing the old one - the repair time is significantly reduced, the amount of construction waste is minimized. Disadvantage - in terms of physical strength, wallpaper is inferior to traditional materials. But, if you behave carefully and avoid mechanical damage, then the period is calculated in many years. In addition, defects on the wallpaper are easily eliminated; after pasting, a small amount of materials will always remain. Do not throw it away, keep it just in case for repair. Bathroom wallpaper must be moisture resistant. When buying, pay attention to physical strength, and it depends on the material of manufacture. Vinyls on a non-woven base are the most modern ones, are distinguished by high rates of mechanical strength, and can have long-term direct contact with water. Available in a wide range color solutions, can be plain or with various patterns and ornaments, with a structured or smooth front surface. Disadvantages - relatively high price, the need to use special glue.

Washable - a cheaper segment, inferior to vinyl in terms of performance. Recommended for use on wall sections that are not exposed to splashing water. Self-adhesive - made of a special polymer film, have a huge number of design solutions. Disadvantages - relatively high price and complexity of finishing. In addition, they can only be used on perfectly level surfaces.

How to decorate the ceiling

The easiest and cheapest way is to putty and paint. However, if there are significant irregularities on the ceiling, it will be almost impossible to achieve a good result. Over time, the paint can darken, or even peel off, even with a small leak, the ceiling will be hopelessly damaged. Installing recessed lighting will not work - only pendant lights will be available to you. A more practical option is the same PVC panels or suspended slatted ceiling... The latter are made from steel, aluminum or plastic rails and are often sold in ready-made sets - along with a frame and fasteners. These ceilings are inexpensive, durable, easy to install and maintain, and are suitable for almost any bathroom.

Are becoming more and more popular stretch ceiling... To install them, you will have to call professionals with special equipment, but as a result, you will get not only a perfectly smooth ceiling, but also reliable protection from leaks: stretch ceilings withstand from 70 to 120 liters of water per square meter. True, this option is not suitable for those who have a gas water heater installed in the bathroom.

How to cover the floor?

The cheapest option is linoleum. It is not difficult to lay it, but in no case should moisture get under the coating, otherwise mold will begin to multiply there, an unpleasant odor will appear. Therefore, linoleum must be glued to the floor, and the seams must be processed silicone sealant... With proper installation, this material has one drawback - a very conditional "beauty". A universal option is ceramic tiles or porcelain stoneware. You can choose them for every taste and wallet. There are practically no drawbacks to this material, except, perhaps, widespread distribution.

Fans of more original solutions choose moisture-resistant laminate or self-leveling floors. However, the first option has too low moisture resistance and quickly fails, and the second is too expensive and difficult to install.

Lighting in the bathroom

Pay attention to the lighting options. Well-thought-out lighting, installed in the right places, can turn the most ordinary-looking room into a masterpiece of design art. Economical bathroom renovation does not involve laying hidden wiring in the walls or diode lighting. But you can install wall lights so that they visually narrow or expand the room. Budget bathroom decoration provides dropped ceilings made of plastic panels in which spotlights can be installed, they will highlight beneficial places, divide the room into functional zones and hide unnecessary structural or design flaws.

Plumbing in the bathroom

It is important to remember one simple rule. Plumbing and its important components are not the things that can be saved on. If there are problem areas in the water supply system, leaks or other temporary defects, then they must be eliminated. Also, a low-budget renovation in the bathroom allows for a complete replacement of siphons and faucets. An old bathroom made of cast iron or steel can be insulated polyurethane foam and renew the enamel coating. If the washbasin has cracks or chips, then it is better to replace it with a new, inexpensive sample. The cheapest bathroom renovation can be done without even changing sinks or toilet bowls with old cracks. For these purposes, there are many modern materials that can seal cracks, renew the coating, or in some cases simply clean it of old plaque.

Before cheaply renovating a bathroom, do not forget about the market rows, where you can find many products. previously used in excellent condition, while at prices significantly lower than market prices. They come to the market from construction organizations, which, while renovating an economy class bathroom at other facilities, simply dismantle old plumbing fixtures and put them on the market for sale. There, worn-out parts such as gaskets in mixers and valves are replaced, and then they are sold at significantly reduced prices.

In this article, we will look at how to inexpensively decorate a bathroom, what materials to use in this case, and learn some useful tips from experts. Before you start planning an inexpensive bathroom and toilet renovation, you need to clearly understand what end results we want to achieve in the end. Typically, the purpose of a repair is:

creating a beautiful interior;
safe operation of plumbing and furniture;
creating comfort and increasing functionality;
preventing the appearance of mold and fungal bacteria;
the longest service life of the materials used.

Economical repairs in the bathroom can be done using inexpensive materials, while observing all of the above points, if you plan everything correctly and choose the right material.

The choice of material for an inexpensive repair

Everyone knows that almost all construction stores today offer an economy version of various finishing materials, which differ in workmanship, appearance and service life. These materials are intended for consumers with at different levels wealth and allow you to make a budget bathroom renovation. Along with this, you can find materials of frankly poor quality, which are not recommended to buy at all.

It is important to remember that the relatively low cost of the material in comparison with analogues does not mean that it is of poor quality.

Tile adhesive

For example, thinking about how to make a bathroom inexpensively, many of course prefer cheaper ceramic tile adhesives and choose the tiles themselves at the lowest cost. For example, there are two of the most common brands of tile adhesive, Ceresit and Moment. Ceresite is considered to be of higher quality and is significantly more expensive than the Moment, which is cheap. But few people know that these types of glue are produced by the same company, only under different brands.

Before cheaply repairing a bathroom, you need to understand the manufacturer's attitude to the product. According to international quality standards, each adhesive has a range of hardness, and if Ceresit is endowed with the maximum value from this range, then the Moment is close to the minimum. Carrying out economical repairs in the bathroom or professional, you can choose any of the indicated adhesives, with this you will not notice any significant difference in quality. So you can save a lot on glue and Moment is perfect as a budget option for installing tiles.

Wall decoration

In the overwhelming majority of cases, tiles of the middle or low price category do not differ in any way in their composition. Inexpensive bathroom decoration made of cheap tiles differs only in the appearance of the glaze. Of course, products of the middle category have a wider range of shades and a variety of texture solutions. In this case, when repairing an economy class bathroom, you should not chase after a chic appearance, you can do with more restrained solutions, but beat them very worthily.

For a budget option for bathroom renovation, you can define three types of wall finishes:

ceramic tile;
plastic panels;
moisture resistant paint.

Important! If you do not have ideally flat walls at your disposal that do not require preliminary preparation, then when carrying out budget repairs in the bathroom, it is better to refuse to use paint. The preparation of the walls will result in a lot of money for the purchase of putty and the call of the master, which means that inexpensive repairs in the bathroom will no longer work.

As for ceramic tiles, working with this material also requires a special tool, certain theoretical knowledge and, of course, practical experience. Of course, you won't be able to make repairs in the bathroom yourself using tiles, without the necessary knowledge and tools. However, in this case, you should not be upset, since there is the cheapest and at the same time beautiful option finishes such as plastic panels.

Inexpensive bathroom repairs using such panels can be done with your own hands without experience. Distinctive feature such panels can be considered:

a large number of color and texture options;
ease of use and installation;
low material cost;
small specific gravity;
the ability to easily replace any damaged segment;
the possibility of hidden laying of plumbing and electrics.

However, there is one negative point. A budget option for renovating a bathroom using such panels requires the creation of a special supporting frame, which reduces the area of the room by several centimeters.

Floor finishing

When carrying out an inexpensive renovation of bathrooms, it is certainly better to use ceramic tiles as a floor covering, having previously laid a screed 3-5 cm thick to level the surface. Since cheap repairs in the bathroom are usually carried out in small rooms, there will be no big costs not buying several squares of tiles, but the screed can be done independently using special mixtures.

As a temporary option, so that it is really quite cheap to make repairs in the bathroom, you can use ordinary linoleum, but here it is important to remember that an ordinary coating will not last long in dampness and mold will appear under it. A few square meters expensive moisture-resistant linoleum, will cost exactly the same as an inexpensive, but quite suitable tile. A cheap option for renovating a bathroom will turn out using a regular silicone or rubber mat, which can be matched to the finish and laid on the floor. But after each bath, this rug must be lifted and the floor wiped dry, as fungal bacteria can grow very quickly.

Lighting in the bathroom

Before making a cheap bathroom, consider lighting options. Well-thought-out lighting, installed in the right places, can turn the most ordinary-looking room into a masterpiece of design art. Economical bathroom renovation does not involve laying hidden wiring in the walls or diode lighting. But you can install wall lights so that they visually narrow or expand the room.

The budgetary finishing of the bathroom provides for suspended ceilings made of plastic panels, in which spotlights can be installed, they will highlight beneficial places, divide the room into functional zones and hide unnecessary constructive or design flaws.

Important! If the room is kept clean and tidy, then even the repair of an economy class bathtub can, in appearance, be in no way inferior to a more expensive type of repair.

Plumbing in the bathroom

Before you save money on bathroom renovation, it is important to remember one simple rule. Plumbing and its important components are not the things that can be saved on. If there are problem areas in the water supply system, leaks or other temporary defects, then they must be eliminated. Also, a low-budget renovation in the bathroom allows for a complete replacement of siphons and faucets.

An old cast iron or steel bathroom can be insulated with polyurethane foam and the enamel coating can be renewed. If the washbasin has cracks or chips, then it is better to replace it with a new, inexpensive sample. The cheapest bathroom renovation can be done without even changing sinks or toilet bowls with old cracks. For these purposes, there are many modern materials that can seal cracks, renew the coating, or in some cases simply clean it of old plaque.

Before cheaply renovating a bathroom, do not forget about the market stalls, where you can find many second-hand products in excellent condition, while at prices significantly lower than market ones. They come to the market from construction organizations, which, while renovating an economy class bathroom at other facilities, simply dismantle old plumbing fixtures and put them on the market for sale. There, worn-out parts such as gaskets in mixers and valves are replaced, and then they are sold at significantly reduced prices.

Interior elements

Even the most economical bathroom renovation will require some expenses for furnishing the interior of the room. The cheapest option is a regular film or fabric curtain, which prevents water from spilling onto the floor while showering. A properly selected curtain can turn an economical bathroom renovation into a chic room, taking all the attention and creating a general mood. A beautiful drawing and the right color scheme can work wonders, hiding imperfections and highlighting the features of the bathroom.

It is important to remember that it is better to make an inexpensive bathroom renovation using a curtain made of waterproof fabric. It costs a little more than conventional film, but the visual and aesthetic effect is much stronger, besides, its service life is much longer than that of its film counterparts.

Any economical bathroom renovation will not look nice and cozy without additional accessories, such as shelves, hangers, stands for bath accessories. Shelves with neatly placed shampoos, gels and balms look much more comfortable than all this will be randomly placed in the corners. Any economy bathroom decoration will look many times more beautiful with the lamp installed on the wall. Below we offer a photo showing ideas for a cheap do-it-yourself bathroom renovation without the involvement of third-party specialists.