What can be cooked from squid: quick and tasty

The construction of a full-fledged bathhouse structure on a summer cottage used in the summer is not always advisable, since the costs of its manufacture are quite high. Sometimes it is preferable to use the budget version of the bath, made from scratch in literally a couple of days. At the same time, outwardly, such a structure can have a completely finished and attractive appearance (due to the use of special techniques for outdoor decoration).

In the article we will talk about how to make a barrel bath with your own hands, what materials to use, as well as drawings, diagrams, photo and video instructions.

The longitudinal dimensions of such structures range from 2 to 6 meters; Moreover, the smallest buildings usually consist of only one steam room with a stove.

Large structures can include a washing room, a recreation room, and an impromptu porch with a canopy.

Material

For the construction of a barrel bath, you can use wood of such well-known species as fir, spruce or larch. Taking into account the special operating conditions at the summer cottage (precipitation, sudden changes in external temperatures, as well as high humidity) it is best to use moisture resistant types of wood. These species include cedar and larch, the high cost of which is fully repaid by the possibility of their long-term exploitation.

As for the shape of the blanks for the manufacture of an improvised bath, a well-planed edged board with a special joint of the "thorn in the groove" type can be used as such.

For the convenience of assembling the structure, it is advisable to give the typesetting elements a rounded shape, choosing a part of the material according to a special template. When using ordinary flat boards, workpieces of small width should be selected, the radial size of which allows the shape of the structure to be as close as possible to the circle.

Base

As a rule, there is no need for a foundation. It is enough to prepare a flat platform and place a special base on it, which serves as a reliable support for a round-shaped structure.

The following can be used as such a platform:

completely concreted or asphalted area;
concreted area with paving slabs laid out along the screed;
an ordinary well-rammed soil surface with a wooden shield laid on it;

In addition, an old reinforced concrete slab of a suitable size can be used to prepare a flat area.

When assembling the support base, try to adhere to the following guidelines:

For its arrangement, a high-quality edged board with a thickness of at least 5 cm should be used, pre-treated with a special impregnation or any other compound that protects the wood from decay.
Distance between transverse support boards should be no more than 1.5 meters, and their total number should be selected based on the size of the bath.
During the assembly process, a rounded groove is made on the cross-member boards, which exactly repeats the contours of the structure installed on them (when preparing the groove, be sure to make sure that the unselected part of the board is at least 10 cm on each side).
To give the structure additional rigidity when assembling the structure, you should use metal blanks, installed in corner joints and at the points of articulation of individual base elements.

Assembly order

The assembly of the bathhouse body begins with the installation of partitions fixed on the base crossbars. When arranging them, one should not forget about special openings intended for the installation of door and window blocks, as well as the processing of wood material with special protective impregnation.

Then, on the finished oval base, several boards of the required length are laid, connected to each other according to the "thorn in the groove" method. Upon completion of the preparation of a part of the circumference, sufficient to fix the end partitions, the latter are installed in place and securely fixed. After that, you can safely continue forming a circle from the boards supported by the partitions.

The required rigidity of the barrel-bath structure is ensured through the use of tightening metal hoops. For reliable adhesion of the covering hoops, special iron clamps are used, by means of which subsequently (after the wood has dried out) it will be possible to tighten the structure, preventing the formation of cracks.

As for the exterior decoration of the building, its function can be performed by the traditional soft roof, mounted on the upper sector of the bath. When arranging it, this part of the barrel is first covered with a waterproofing material (plastic wrap, for example), and then covered with roofing material or bituminous tiles.

Video

Assembly of the barrel-bath:

Photo

In the photo you can see the various executions of the barrel bath:

Schemes

And now, you can familiarize yourself with the diagrams and drawings for the manufacture of a barrel bath:

To take a steam bath after a hard day at work is the dream of almost any person. But going somewhere to the steam room, renting a room and paying for it, by the way, really a lot of money, will not please everyone. If you have built your own house and are thinking how to equip the site, then be sure to consider the possibility of creating your own bath, which you can visit at any time convenient for you with minimal cost for fuel. In addition, it will be possible to take a steam bath in the company of friends who also like this format of rest. But if you appreciated this idea, but do not know where to start, then first of all, familiarize yourself with the existing projects of structures and choose among them the one that you like the most. Recently, barrel-baths have begun to enjoy particular popularity, which have a lot of advantages, in terms of obvious accessibility and practicality. In this article, we will consider all the features of creating such steam rooms, as well as the materials you cannot do without.

The advantages of such structures

Undoubtedly, it is impractical to build a capital bath complex next to a small cottage or cottage, especially if you do not live in a house all year round, but only during the summer. In addition, it should be noted that the bath is a somewhat expensive pleasure. Yes, such a construction will pay for itself pretty quickly, but no one canceled the initial expenses, which, alas, cannot be done without. But what about those people who do not want to give up the idea of creating a bath, but do not have the necessary funds? In this case, it is recommended to pay attention to the budget options of the complexes, which, in terms of their functionality and durability, are in no way inferior to massive extensions.

A barrel bath is a structure that you can create on your own without much difficulty, spending a minimum of finance and your precious time on it. You can build a steam room in a matter of days, and its appearance at the same time it will be very attractive and complete thanks to the finishing works... The most important thing is to adhere to the chosen scheme and the advice of specialists in the field of construction and design.

The length of such a structure can be at your discretion - from two to six meters. If your budget is very limited, you can create a compact "barrel" in which there will be only room for the steam room and the oven itself. If we talk about well-equipped and large saunas, then a relaxation room, a shower room, a simulated loggia, as well as almost any other room that your heart desires, can be planned in them.

In addition, the following advantages are worth noting, namely:

original appearance;
a small amount of space is needed for the creation of a structure;
high-speed pace of work;
a barrel bath has absolutely the same functionality as capital structures, in no way inferior to them;
no need for a massive base;
you can create a steam room from materials that remained, for example, after building a house;
availability and low price;
you can build a barrel bath according to drawings and diagrams yourself.
if you wish, you can create individual project constructions and implement it based on their own wishes and preferences.
Do-it-yourself barrel bath, the drawings of which you can easily find on the network and choose among them exactly those that are suitable for your site, and, of course, budget.

Choosing a building material

The most affordable and practical option are grooved boards

To create a sauna barrel on your own, without involving a team of craftsmen, of course, it is worth using wood. You can choose the breed at your discretion, but the safest for human health and environment there will be pine, spruce and fir. But if it comes on the creation of such a structure in conditions suburban area, then you should definitely take into account the climatic conditions, the amount of sediment and the planned operating time. That is why, for such objects, it is best to give preference to cedar, as well as larch, which, although they are not cheap, will last long enough and will delight you with their aesthetic characteristics.

It is especially important to carefully consider the form in which wooden blanks for the future bath will be made. A planed edged board with a thorn-groove fastening type is perfect for these purposes.

To simplify the assembly process, construction experts strongly recommend processing the material so that it takes on a slightly rounded shape. To do this, you can use pre-created templates. The material should have a small thickness and width, so that it is as convenient and simple as possible to work with it, both at the preparatory and at the final stage.

Barrel bath: do you need a foundation?

People who have thought about building their own barrel bath according to simplified drawings first of all think about whether there is a need to create a base for this kind of construction? Often, you do not need to create a foundation. All you need is to prepare the territory. To do this, remove all debris, vegetation, and other items that may interfere with installation from it. It is also important to level the surface. It should be placed on supporting elements, which will serve as the foundation.

The support for the barrel bath can be:

The area that was previously concreted or asphalted; ;
The area on which the tiles were laid;
Cover with a well-fixed flap (usually made of wood).

If you do not have the opportunity to carry out such work, then it is safe to say that an old reinforced concrete slab of the dimensions you need can be perfectly used as an improvised foundation.

At the time of creating a foundation from supports, try to follow a few tips:

When creating bases, it is recommended to use a reliable edged board that has a thickness of at least 5 centimeters, having previously carried out a high-quality impregnation treatment in order to prevent the formation of fungi and mold.
Make sure that there is not too much distance between each support. The most optimal is one and a half meters, and the number of boards varies depending on the size of the tank bath.
When assembling the structure, make a small rounded notch on the transverse boards so that the support exactly repeats the contour of the bath (it should be created not from the edge, but closer to the center, leaving at least 10 centimeters at the free edge).
To make the foundation rigid, all kinds of metal elements are used when creating a structure, which are fixed at the corners of each component of the base.

Assembly order

The process of assembling the body of the structure itself should begin with the installation of partitions, which are fixed transversely to the base. When equipping them, do not forget that any bath should have several door and window openings, as well as the fact that this material should be additionally treated with a protective solution.

After that, the boards of the most optimal length are alternately laid on the finished foundation (based on the parameters of the future bath). They are connected according to the principle of "thorn in the groove" in order to give the structure a rounded shape. Upon completion of these works, fixation of the end partitions is carried out, which are mounted in the place specified by the drawing.

Bath interior decoration

The required rigidity of such a structure is ensured through the use of special metal hoops. To ensure their reliable fastening, it is recommended to purchase special clamps, which, after the timber has completely dried, will tighten the structure and prevent the appearance of gaps and cracks.

Outdoor decoration saunas barrels are optional. If you nevertheless decide that you need it, then the usual soft roof, which is installed directly on the upper part of the structure, is quite suitable for carrying out the work. First, you should treat the surface with a special waterproofing material (the budget option is a simple polyethylene one), and bituminous tiles. After everything is ready, you need to wait a few weeks for the wood to dry completely. It will be possible to equip with everything necessary and start full-scale operation of the steam room in a month. Of course, this rule is not necessary to follow, but if you want the bath to please you with its practicality and durability, experts in the construction industry still advise taking these recommendations into account.

In this article, we have covered all the main features, as well as the benefits of barrel baths. Such structures are a really worthy alternative. capital buildings so if you have a desire to build a sauna in your home, be sure to consider them.

What to do if you don't have enough energy and time to build a full-fledged bath? In this case, the principles of modular construction can be applied. It was they who formed the basis of the technology for the construction of a barrel-bath. You can make such a structure yourself, and with proper skill and the availability of tools, even without a partner.

As the name implies, the body of the bath is a cylindrical structure made of planks with a groove connection. To strengthen it, tightening metal plates (analogue of clamps) are installed on the surface. At first glance, the design will be ideal for the function of the bath. The inexpensive construction cost, the possibility of purchasing ready-made modular elements and the high construction speed speak for themselves.

However, with a more detailed analysis, the following disadvantages become visible:

Low thermal insulation of the walls. V winter period heat loss can negate all attempts to increase the room temperature to the desired value.
Small area. Most of the factory models and standard drawings provide for a small dressing room and steam room in the design. Together, their area can be up to 12 m², ie. in fact, bath procedures can be simultaneously received by up to 3 people.
Water supply and sewerage connection. The implementation of these procedures is difficult, since in winter there is a high probability of freezing of pipes and the formation of an ice plug in them.

If you remember that the premises are planned as a budget option baths, you can ignore all these disadvantages. The most important advantage of the design is the ability to transport it, which cannot be done with.

Drafting and selection of materials

First, you need to develop at least an elementary project documentation- a drawing of the building and a list of materials for its manufacture.

Now you can find many standard blueprints for a barrel bath. Despite the apparent diversity, they all include the following basic elements:

Base

It is made of boards, the thickness of which must be at least 5-6 mm. At the first stage, a recess is made on each of them, into which the boards will be installed. To strengthen the structure, the edges are upholstered with retaining formwork.

Assembly elements - edged boards with groove connection

It is best to choose a quality material - larch or cedar. Their length must correspond overall size finished structure... Mounting grooves are made on the surface for the installation of partitions. It is not recommended to divide the component parts by length, as this will lead to a loss of the thermal insulation properties of the structure.

Partitions

Planks are stuffed onto a wooden base, and then cut in such a way that you end up with a round structure. Its diameter should be less than the outer bath by the thickness of the wall boards. If an internal partition and an external entrance are made, space should be left for the doorway.

Additional elements

These include slatted flooring and floorboards. They are also made of wood.

Next, equip the installation site of the structure. For this, any place on the land is chosen, but it is recommended to mount the bathhouse on a hill. A small pit is dug up to a depth of 0.5 m and dimensions that exceed the dimensions of the bath by 40-50 cm. A sand-gravel mixture is poured onto its bottom, which is carefully compacted. After the final alignment, you can start assembling.

The bottom row of boards is nailed onto the installed frame. The location of the mounting grooves must be monitored - they must form one common groove. After that, the partitions are installed and secured. Their plane should be strictly perpendicular to the level of the sandy floor.

After that, the rest of the wall boards are nailed. A correction rail is installed between the first and the last. It should be wedge-shaped. With its help, it will be possible to adjust the gap in case of swelling or thermal expansion of the boards. Further, the entire structure is pulled together with a metal tape. Holes are drilled on the floor surface to remove water. This is done in at least 3 places. This completes the construction of the barrel bathhouse.

At the final stage, the floors, flooring and doors are installed. Particular attention should be paid to safety precautions when installing the boiler. This area must be covered with fire-resistant material. For convenience, holes are made in the wall of the bath for the supply of water and electricity. The resulting structure, if necessary, can be transported by any in a convenient way- on a caravan or in a truck.

The barrel bath is a truly unique invention in which the health properties of an ordinary bath, the beneficial qualities of natural wood, mobility and maximum convenience of a collapsible design are organically combined.

Subject to proper assembly, the barrel-shaped bath is very reliable and as durable as possible. Such a structure can be easily attached to the car and taken to any desired location.

The bath has a small volume and heats up in the shortest possible time. Despite its modest size, such a steam room can be equipped with all the necessary devices for a full and maximum comfortable rest... At the same time, you can cope with the assembly of the barrel on your own.

Mobility

The bathhouse can be transported or even rolled (moved) manually, with the help of several friends. The weight of the barrel-bath is on average 1.5 tons, so it will be possible to handle the transportation of the structure over short distances manually, and almost any machine can pull such a weight.

For comparison, just one brick oven for an ordinary bath can weigh much more than 1500 kg.

High warm-up speed

In warm weather, it will be very hot in such a bath in half an hour.

Compactness

The average area occupied by a barrel-shaped bath does not exceed 10 m 2, so this design is ideal for placement in small areas.

Original design

The bathhouse has an attractive and very pleasant appearance. Psychologists all over the world claim that contemplation of rounded shapes helps a person to relax, and this is very useful when visiting a bath.

Economy

You will spend much less money on assembling a bath in the form of a barrel compared to building a capital steam room of a similar area.

Also, among the advantages of the structure under consideration, there is no need to equip the foundation. For a stationary installation, it will be enough to prepare a pair of strong beams, rigidly and reliably connected to each other, and install the barrel on them.

Extreme ease of maintenance and operation

Fewer corners means less dirt in hard-to-reach places, less footprint - less hassle cleaning.

Ergonomics

Even with a modest area inside such a bath, you can equip a shower, a dressing room and that's it. necessary equipment... On average, a barrel sauna can accommodate 4-8 people.

Due to the high-quality thermal insulation and the multilayerness of the barrel, the effect of a thermos is created inside such a bath, which can significantly reduce the cost of fuel and electricity.

The averaged data of numerous calculations indicate that, thanks to the round shape alone, the operation of the barrel-bath will cost 20-30% less money than the maintenance of an ordinary steam room.

What materials should be used to make a barrel-bath?

With the assembly and further operation of the barrel, there will be no problems and difficulties if you initially pay due attention to the selection of suitable materials.

To assemble the bath, use only properly dried and properly cut wood into pieces of suitable size. Choose the type of wood in accordance with your preferences and material capabilities. It is recommended to give preference in favor of oak, linden, pine, spruce, and also cedar.

The optimal width of the boards is 9 cm, the thickness is 4-5 cm. It is desirable that the wooden boards initially have a thorn-groove connection - this will allow you to assemble the structure with the least expenditure of time and effort.

But even if such spikes and grooves are absent initially, make the mentioned connection yourself. It allows you to obtain durable, reliable, stable and robust prefabricated systems, which, if necessary, can be repeatedly disassembled and assembled without deteriorating the operational properties of the structure.

Additionally, you need to purchase or make yourself a few strong steel hoops. These products will provide additional fixation of the barrel along the entire perimeter.

All the required accessories are purchased without any problems in specialized stores that sell various products for baths and saunas.

The required number of metal hoops and wooden planks calculate individually according to the size of your future steam room. Typically, the length of such a barrel varies from 250 to 500 cm. Additionally, such a structure can be equipped with various extensions.

A bath in the form of a barrel, if it is planned to be used throughout the year, needs to be equipped with high-quality thermal insulation. Traditionally, mineral wool materials are used for insulation.

The top of such a steam room can be arranged at your discretion. Here, focus on personal preference. The main thing is that the roof reliably protects the bath from adverse weather conditions and ensures effective and timely removal of moisture.

Barrel Bath Assembly Guide

Ready-made drum assembly kits are available for sale. The prefabs come in a variety of sizes so you can choose and buy without any problems suitable material... This will save time and effort.

Also, all the necessary structural elements can be made by hand. The assembly of the barrel is carried out in the following sequence.

First step. Make the base a steam room. Saw a 5x20 cm board into pieces according to the diameter of the barrel. Place the supports in increments of up to 150 cm. Determine the specific number of supports individually in accordance with the length of the structure.

To connect, cut grooves in the upper ends of the boards. The shape of these slots should follow the circumference of the barrel. Determine the dimensions of the grooves so that the remaining uncut part of the board has a width of 100 mm.

Second step. Collect the required number of internal partitions, as well as the end walls of the future bath. Use a grooved board for assembly. Connect wooden planks with cross bars. Fix the transverse bars themselves in such a way that in the future they do not interfere with the installation of windows and doors.

In ready-made kits, the necessary end elements are sold in an assembly, which is very convenient.

Third step. Cut the tongue-and-groove board according to the length of the barrel. Sand the ends of the elements, and then treat the boards with an antiseptic impregnation.

Fourth step. Install the supports with the same pitch. Lay on them the bottom of a barrel-bath made of several wooden planks connected using the thorn-groove method. As soon as a sector of the circle is formed, the size of which would be sufficient for the installation of the end walls, place these walls in the appropriate places and continue laying the boards until the circle is complete.

Fifth step. Secure the assembled barrel with metal hoops.

Sixth step. Install windows and doors.

Seventh step... Equip the roof. A reliable option is a roof on rafters. To create rafters, use a bar with a cross section of 5 cm. You can cover such a roof with corrugated board, metal tile or other similar material. Attach the topcoat to the pre-assembled plank battens.

If the bath will be visited only in warm weather, you can refuse insulation. The design of the steam room is such that it will be able to warm up enough in about half an hour and keep the heat for 2-3 hours, and this time is enough for most visitors to the steam room.

In conclusion, it remains to treat the outer surfaces of the walls with a fire retardant, and the inner ones with an antiseptic, then you can proceed to internal arrangement steam rooms.

Internal arrangement of a mobile bath

Inside, such a bath can be equipped like any other steam room. It even has enough space for a small dressing room and a compact shower.

When choosing a stove, be guided by modern electrical models. Such units do not take up much space and do not need a chimney. A 6 kW electric sauna heater will be more than enough for a barrel sauna. However, such ovens are capable of producing extremely dry steam.

If you are not satisfied with this, give preference small metal wood stove... Choose a specific model and dimensions of the structure with reference to the volume of the steam room. Don't forget about measures fire safety: wooden structures must be protected from all heating elements by means of sheet non-combustible materials, and the places where the chimney passes are insulated with fire-resistant insulation.

When arranging the floor, be sure to slope in the direction of the drain. For 1 m of surface length, there should be a slope of about 1 degree.

For interior decoration floors, walls and benches it is best to use larch. Such wood will not burn the skin. Place the benches along the wall opposite to the stove. You can also install benches at the side walls.

Lay the electric cables in fire-resistant insulation. Sockets, switches, lamps - all of this must have an appropriate protection class.

It is very easy to take care of such a bath.- it is enough to regularly ventilate the steam room and treat the walls with high-quality protective equipment at least annually.

Thus, in just a couple of days, you can independently assemble a barrel bath, which will delight you and your guests with its light steam for many years. Follow the instructions and everything will definitely work out.

Happy work!

Today, barrels' baths are a very popular product. Beautiful view The barrel-shaped baths are eye-catching. The idea to create a bath in the shape of a barrel came to our country from neighboring Finland. There barrel baths have been popular for many years. Today there is a large number of offers on the Russian market of this product, for every taste and wallet. The cost of such a bath depends, of course, on its size and materials from which it is made. In the length of the bath, barrels are made from two to seven meters, and in average they are two meters in diameter. In the short bath, only the steam room itself is placed, and in the large one you can place all the amenities of an ordinary stationary bath: a shower, a rest room, a toilet. For the mobility of the bath, it is installed on a trailer of a light car and is very often used for commercial purposes. All these additional options lead to an increase in the price of the bath at times.

We will analyze and calculate the cost of a barrel bath, if you make it yourself. Take, for example, a barrel four meters long and two meters in diameter, in several versions. Drawings of such a bath can be easily found on the Internet.

Sauna from a barrel board 44 mm thick without the use of insulation

The simplest and most inexpensive option for making a barrel bath with your own hands would be a bath from the so-called barrel board without additional insulation... A barrel board is so named because it has a semicircular groove and a tenon of the same shape and is used to make large barrels. Let's calculate the required number of boards. To do this, let's calculate the circumference of the barrel, which is equal to 2πR. A barrel diameter of two meters means 2 * 3.14 = 6.28 meters. Boards can be used of any width, but most often their size is 15 cm, and taking into account that part of it will go into the groove, we will take 12.5 cm for the working width.And so, we calculate the number of required boards 6280/125 = 50 , 24 pcs. The required number of boards is 50 pcs. There will remain a small gap equal to 0.24 * 125 = 30 mm. It will close when the outer boards are screed, since the diameter of the bath will decrease slightly. The decrease in diameter is due to the fact that a small groove is cut out in the outer boards for a tighter fit to vertical walls and partitions. Boards are usually sold 6 meters long, which means that this volume of boards (50 pieces) is enough for two walls and one partition. It must be remembered that the board must be well dried. After searching through the ads on the Internet, we find a pine board with a moisture content of 15% worth 11,500 rubles per cubic meter. There are 22 boards in a cube, which means we need 50/22 = 2.27 m3. Multiply cubes by money and get 26105 rubles for the whole bath. A cedar barrel sauna will cost more, because 1 m3 of cedar board costs about 35,000 rubles, and larch about 40,000 rubles. Metal hoops for screed boards must be used from of stainless steel... On this bath it will be enough to use three hoops. Their cost will be about 6000 rubles. You can cover the bath with flexible bituminous tiles or polycarbonate. Let's calculate the roof area: 6.28 / 2 = 3.14 * 4 = 12.56 m2. The cost of shingles varies greatly depending on the manufacturer. Let's take average price at 400 rubles per m2 and we get 5024 ruble. Two doors, an entrance and a steam room, will cost 7000 rubles. For the rest room, it is necessary to make benches from any wood, and for a double shelf from hardwood (linden). Lounge benches 500 rubles, for a steam room 3000 rubles. Wooden grates on the floor 1000 rubles. In a barrel bath, it will be enough to install two sockets and two lamps, which must be connected through a separate machine. Electrical equipment 1000 rubles. And finally, the most basic thing, without which a bath is not a bath, is the oven. In baths, barrels are usually used wood stoves not high power, since due to the lack of nodes in the steam room, the bath warms up quickly. A Russian stove with a chimney and a water heating tank will cost about 20000 rubles. The place where the stove will stand must be finished with a non-combustible material, for example, asbestos sheets. Their purchase will cost 1000 rubles. The wood outside must be protected from moisture and treated with a special impregnation. Add more 3000 rubles. For the stability of the construction of the bath, the barrels are placed on special stands with a semicircular cut. For these purposes, you can use a board 50 * 150 mm., More 1000 rubles. We will postpone more for fasteners and unaccounted costs 5000 rubles.

Today, the bathhouse is a barrel, four meters long in the basic configuration, is offered to be purchased for 170-205 thousand rubles. Let's calculate the cost of a self-made barrel bathhouse. We get 79629 rubles for a non-insulated pine bath and 132974 rubles for a non-insulated cedar bath.

Sauna from a barrel board insulated with foil insulation

When insulating a barrel bath, in addition to insulation, it is also necessary to purchase lining, which will have to decorate the walls. Let's calculate the required amount of insulation. The standard width of foil insulation is 600 mm or 1200 mm. The circumference is 6.28 m, the length of the bath is 6 meters, therefore, we need 6000/1200 = 5 lengths of 6.28 m. 6.28 * 5 = 31.4 m of insulation. Insulation of the partitions is also necessary and will be 3.14 * 3 = 9.42 m2, that is, approximately another 8 m of insulation with a width of 1200 mm. As a result, we get about 40 meters of insulation worth 2500 rubles. For gluing the joints of the insulation, foil tape is used ( 350 R).

Calculation of the required number of lining

The working width of the standard lining is 110 mm, the circumference of the bath is 6.28 m, which means you need 6280/110 = 57 pieces 2 meters long for the steam room and 57 pieces for the rest room. For finishing the steam room, linden wood lining is most often used. It will cost 15000 rubles. Lining for the rest room will cost 5200 rubles.

Bottom line: a do-it-yourself barrel bath from a barrel board with foil insulation will cost 102679 R. pine and 156024 from cedar.

Frame bath

A barrel bath can be built not only from a barrel board, but also on frame technology... A wooden frame is assembled, sheathed from the inside with clapboard, outside with a board, and insulation is placed inside the wall. Only a few boards of 100 * 50 mm are required for the frame. Exterior wall board will cost order 8000 R. and it will need about 50 pieces. When sheathing a bath with an ordinary board, they are laid with a slight overlap on top of each other, so the working width is taken as 130 mm. It will take the same amount for the interior decoration of the lining as for the previously calculated options for the manufacture of barrel baths. Insulation is used to insulate the walls. mineral wool with foil and it will take about 40 m2 ( 6000 rubles). The cost of the frame can be attributed to unaccounted for and additional costs.

Bottom line: a do-it-yourself barrel bath using frame technology will cost 61524