What can be cooked from squid: quick and tasty

The dacha is a place where you want to relax after the hustle and bustle of the city. Therefore, it must have everything necessary for comfort, including paths on the site, on which not only ease of movement depends, but also safety.

Today, for the manufacture of paths in the garden, you can use various materials... Someone gives preference paving slabs, or gravel, but someone goes a more radical way, and makes tracks from old tires.

Indeed, car tires are very suitable material for these purposes. In addition to decent physical and mechanical properties, the tires have a tread that will make movement on homemade tracks as comfortable and safe as possible.

How to make tracks from old tires? Which tires are the best to use for these purposes? Read about it in a construction magazine.

Original and beautiful tracks made of old car tires are not easy a budget option... Such an approach to arranging a garden plot will make it possible to embellish it and highlight it among many.

It is also noteworthy that it takes a minimum of time and tools to make such garden paths with your own hands. By the way, a grinder will be needed from a tool, but a jigsaw with a metal saw is better. If you don't have an electric jigsaw, you can also use a sharp knife. However, the work on the manufacture of tracks, in this case, will be seriously delayed.

First of all, you will need to cut out the sidewalls on the tires, so that rings are obtained. As mentioned above, for work it is best to use a jigsaw with a blade for metal. After the sidewalls are cut, it will be necessary to cut the tires in half, so that separate stripes are obtained.

To align the stripes, you will need to make small cuts on them from each edge, up to 5 cm. Thus, when laying garden paths from tires, there will be no difficulties with leveling them.

For the manufacture of tracks, you can use different tires, starting from R13 and larger. Some of the makers take DT D20 tires altogether. However, in this case, there may be some difficulty in cutting out the side of the tires. Yes and high altitude protectors can become an obstacle to comfortable movement on homemade paths.

Therefore, it is recommended to take tires that are not too large, and exclusively from cars. It will also be just fine if there is at least some kind of protector on the tires. Then the garden paths will not be as slippery as those for the manufacture of which the mine conveyor belt (conveyor belt) was taken.

In order for the tire tracks to serve for a long time, you should adhere to the basic rules associated with their laying. For these purposes, you will first have to mark the territory and prepare a site for the paths.

Therefore, armed with a length of rope or fishing line, as well as several wooden pegs, you should mark the boundaries where the tire tracks will pass with your own hands. Then you can prepare the base for laying them.

If there is vegetation in the place where the garden paths are laid, then it is necessary to get rid of it in any case. Then, using a shovel, you should carefully level the soil under the paths (the place should be level, without depressions and protrusions).

The last step will be the laying of tracks from car tires... There is nothing difficult in this, the main thing is that the homemade paths fit well to the surface of the ground, and do not fidget on it.

In some cases, it is necessary to build something like a crate under the paths, but this usually happens only in a very swampy area.

Summer residents are well aware of how inconvenient it is to work and just walk around a summer cottage where there are no good garden paths. And when the rain passes, things are really bad. Everywhere there is one dirt, which you also carry with you on your shoes. So it is quite easy to get injured when your feet ride on a slippery path. Therefore, it is recommended to definitely make a path - including between the beds. So the dirt from the garden will not rush into the house, so you will have to clean up much less.

It is possible to pave a garden path, fortunately, from a wide variety of materials - stone, tiles, paving stones, wood cuts, but these are not cheap materials. At the same time, we have a more budgetary option with low costs - in the form of car tires. Therefore, we propose to make tracks from car tires. You just need to cut out the side of the cord with a knife and cut it in the middle, from which you get the finished track. It is laid on wooden slats and nailed down.

For the manufacture of garden paths at low cost, you need to take materials:
car tires;
wood planks;
nails or screws.

List of required tools:
sharp boot or other knife;
stick;
hammer or screwdriver.

Step-by-step description - creating a garden path from car tires

As you can see, everything is quite simple, while the garden path is budgetary and practical.

Ideas for using car tires for garden paths

(ArticleToC: enabled = yes)

Around offices and residential buildings, on garden plots and playgrounds increasingly appear handicrafts from old tires that have served their time. The shape of this landscape decoration depends on the amount of material available.

Even simply, putting the tires on top of each other, pouring the earth inside, they get a pretty flower garden. If you are smart, you can create real masterpieces from tires.

A great place for translating extraordinary ideas into reality is a summer cottage best material- worn out tires. Of these, craftsmen construct not only flower beds, but also other crafts from old tires: pools, sandboxes, flower baskets, fairy-tale characters and swings for children, paths, etc.

Landscaping continues to gain popularity, so every owner of a suburban area is looking for bold and exclusive ways that will help make it different from the neighbors.

The most simple, but effective way is the creation of crafts from old tires. You don't need to be a professional to do this. It is enough to make a sketch and select materials.

When the size of the site is small, it is wiser to place single forms on it: a stork, a carriage, a heron, a frog or a parrot.

If the size of the lawn is large, then crafts from old car tires - vertical structures and multi-tiered flower beds - must also be large.

Flower beds can be very different:

• oval or round;
• high or low;
• in the form of animals and flowers;
• multi-tiered.

In addition to paints and tires, various stones, technical marble, building materials, metal mesh, and aquarium decorative stone are often used. It is easier to work with winter rubber, which is thinner and softer.

Beds and flower beds made of tires

The easiest way is to make a flower bed of tires in the form of a flower, first marking out the shape of the petals with chalk. Then cut them out with a sharp knife. In the future, stable enamel, oil or nitro paint is used for decoration, which evenly fall on the original material and hold for a long time.

Spray cans and car paint will do. In order not to overheat the plants, it is better to choose a light-colored paint.

The white flower girl from the tire looks elegant.

No less beautiful is a flower garden made of tires, for the decoration of which a stone was used.

Solid compositions and combinations of different colors are equally impressive.

Dyeing

For low and small colors, they are painted in bright colors. The shape of the flower beds is chosen in the most diverse. To give an aesthetic look, when painting tires, it is advisable to grab the inner surface from above.

Multi-tiered flower beds

If there are enough tires on the farm, you can create a multi-tiered flower garden, for which you will have to cut out the middle of all tires in order to get rings.

A ring structure is assembled in the following sequence:

• install the largest tire in the center;
• line the bottom with rubble or sand;
• poured fertile soil;
• put on top a tire of a smaller diameter with the same filling.

The sizes of the components of the exposition determine the number of tiers. Flowers or strawberries are planted in the spaces formed between them.

Flowerbed-swan - a flower garden made of tires with your own hands

A swan made of tires looks original, in the inside of which flowers flaunt.

Having stepped back from the edge of the tread 30-40 centimeters, a pair of rounded cuts (on 2/3 of the surface) are made parallel to the circumference on the opposite side. The narrow middle section will be the neck. It is cut off on one side to form a head at the end. From the side surface, wings will be obtained. But for this, the tire will need to be turned out and finished with cuts of different lengths that imitate feathers. Having painted the figure and letting the paint dry, they start planting flowers (preferably undersized ones - like forget-me-nots).

They will transform the site beyond recognition and at the same time make it cozy and unique mixborders, colorful rabatki made in the form of cups with blooming flower beds.

Creative flower garden turtle

This cute figurine will be made of a tire and a tread cut into 4 parts. Protective paws are inserted into the slots made on the sides of the tire. They are fastened with wire staples, like a tail cut from rubber.

Attach the head made of crumpled newspapers to the neck ( plastic bottle) will help the scotch tape. You can wear a plastic or straw panama hat on it.

Then, the craft is painted according to real "turtle" laws, so that it is clear what they wanted to portray. They draw eyes and a mouth, and plants are planted in the body.

Flowerbeds made of rubber tires

Do-it-yourself flowerpots made of old car tires will become not just a functional part of the site design. They will give it exclusivity, make the compositions complete, emphasize the magnificence of blossoming flowers. This material has many advantages: you do not need to spend money on it, it is resistant to unfavorable environmental factors, so for many seasons it does not lose its attractiveness. Most suitable for creating flower beds imported winter tires diameter R12-R17 (moreover, the more its wear, the better), since it is softer.

Video: Do-it-yourself flower beds. A flower garden from a tire.

DIY tire track: economical, beautiful, reliable

Tires make wonderful tracks for suburban areas, which are not afraid of the vagaries of nature: in winter this material does not crack, in rainy autumn it does not get wet, in summer heat it does not deform.

Arrangement of tire paths will not take much time, but the site will noticeably change. No material costs are required for tracks that will last an incredibly long time. In addition, it does not require additional maintenance and prevents weeds from germinating.

All that is needed to make it look well-groomed for a long time is rinsing with a hose or watering can, and sweeping away debris. Even after heavy rains, the path does not slip, remaining practically dry, so you can walk along it completely freely.

Tire changers and service stations will help you get the right amount of tires. Since truck tires are wider, it is best to choose them.

Preparing tires for the device

Those who like this idea can use tires or tiles made from them to create paths. Preparation begins with the separation of the tread, i.e. circumcision in a circle of the side part.

To do this, use a powerful and sharp knife, which is periodically dipped in a lubricant (soap, oil). To avoid jamming, a pry bar is inserted into the hole formed behind the knife.

After the sides are cut, there is a rubber band.

When its amount corresponds to the area of ​​the future track, proceed to the preparation of the base for laying, consisting of 3 layers:

1. compressed soil;
2. rubble;
3. cement and sand, taken in a ratio of 3: 1.

The place under the track is abundantly moistened and tamped.

At the next stage, the tapes are aligned and fastened to the boards or bars. The edges are fastened with nails, and if there are several strips in the track, then they are laid with a gap of 1-2 centimeters. This is done in order for the soon-to-appear grass to additionally fix the products. It is recommended to make a recess in the place where the rubber and the board are attached so that your feet do not cling to the edge. That's all - the exclusive path is ready!

Puzzles for tracks

No less practical and convenient to use is a rubber puzzle track that allows you to change its slope and direction. It looks more impressive than from rubber tires, but it requires financial expenses to purchase rubber tiles.

You can use boards, but they are not comfortable to walk on. On the paths made of linoleum, it is easy to slip, and the slate will crack easily. Therefore, the most the best option are the tracks made of tires.

Tire steps

If the site has an uneven relief, it is rational to equip not a path made of tires, but a ladder. Under heavy load, they are installed in two rows. In installation, such a design is no more difficult than laying rubber. At the same time, the staircase on the site will be an original design element.

Tires are placed on the ground, starting from the bottom and gradually moving up. For better fixation, the wheels need to be dug into the ground and filled with soil.

The advantages of an unusual ladder include less stress on the joints during ups and downs, pleasant shock absorption.

DIY tire sandboxes

All children enjoy playing in the sandboxes. It is very easy to make them if you have car tires that have reached the end of their service life.

Today, you can often find all kinds of bright sandboxes created by the hands of creative parents in parks and playgrounds.

Tires are valuable in that they are easy to fasten, having the simplest tools at hand:

• small and large sharpened knives;
• wire for staples;
• nails.

You also need to buy different colors of paint and find tires of different diameters.

Sandboxes can be made from one bus and several.

To make them you need:

• rubber hose;
• bus or several;
• knife with a sharp powerful blade;
• shovel;
• paints;
• sand.

For the future place of the kid's games, it is necessary to dig a recess, the diameter of which should not exceed the size of the tire. The tire is trimmed so that the top is free.

A rubber hose, previously cut in half, is put on the cut part, which will protect children from injury. Having painted the sandbox in bright colors and letting the paint dry well, pour in the sand and "open" a wonderful place for the children to play. They will be protected from the bright sun by a beach umbrella fixed in the center.

Video: DIY tire sandbox

Sandbox "wavy"

Several children can play in it at once.

To create you have to stock up on:

• several small tires of the same diameter;
• round frame;
• glue, screws, nails;
• with a knife;
• sand.

When arranging suburban area often there is not enough money for new building materials. Most of the owners have learned to do with improvised means. And if you add a little craftsmanship, then from unnecessary things you get unusual functional products.

One of these solutions is garden paths made of car tires. It is a durable material that requires little maintenance. And the creation of a path from it is within the power of a person without construction skills.

Pros and cons of using

Among the advantages of using tires, the following are noted:

1. Material reliability... For tires, high quality durable rubber is taken. Even when worn out, they do not lose their properties.
2. Durability. Such a path will serve for years without the need for repairs.
3. Anti-slip rubber... The relief surface allows you to walk on them calmly during heavy rain or frost.
4. Not afraid of temperature extremes, high humidity.
5. Does not deform under high mechanical stress.
6. Requires minimal maintenance... It is enough to periodically rinse the surface from dirt with a hose or sweep the debris with a broom.
7. Easily move the track to another location if necessary.
8. There are almost no costs for such a path... You don't need to buy material, but necessary tools every owner has.
9. The tire does not rot and dries quickly.
10. Ease of installation.

Photo: future path from a truck tire

But one should also take into account a number of disadvantages that will have to be faced. Among them:

1. The need for a large number of tires... Even for a small garden path, you will need more than a dozen of them. But if you agree with the service station employees for a nominal fee, then you will have a sufficient amount of rubber in stock.
2. Unaesthetic appearance... Of course, the beauty of a tire path cannot be compared to natural stone. However, for owners of summer cottages, for whom practicality, durability and price come to the fore, the attractiveness of the path is not so important.
3. Weak plasticity of rubber... Before assembling a product from a tire, the material should be straightened, which will have to work a little.
4. When creating a path, a compulsory gravel bedding is required.... Otherwise, the track will soon simply sink into the ground.

Users often search:

How to do it yourself - we disassemble step by step

First, you should prepare the necessary tools and fasteners:

• sharp knife or jigsaw;
• wooden slats;
• hammer;
• hacksaw;
• roulette;
• shovel;
• axe;
• nails (at least 7 cm long).

The number of tires depends on the width and length of the alley. To make a neat garden path from old tires, it is important to carefully approach each stage of creation. Let's analyze them in detail:

1. Preparation of working material... Carefully separate the rim of the car tire from the tread strip. The main tool is a jigsaw. Many craftsmen suggest using a sharp knife, constantly wetting it with grease, but it will take more time and effort. The rim is separated strictly along the edge of the tread. This makes the cut rubber straighten easier. The jigsaw should be guided around the circumference of the tire, not across it.... This measure will prevent the blade from dulling or breaking the tool.
2. Ribbon forming... For this, the protector is cut with a knife or ax. The number of stripes depends on the selected track dimensions.
3. Creating a solid foundation for the path... The trench is dug to the depth of the shovel bayonet. The bottom is compacted. A layer of crushed stone or gravel is filled up. From above, you can fill it with sand-cement mortar. But this is optional. For non-porous soils, a gravel bed will be sufficient.
4. Aligning and securing tapes... It is carried out using wooden slats, pre-treated with resin. The edges of the rubber are straightened, nailed to the slats.

For paths with a width of several strips, a gap of up to 2 cm is left between the tapes. Rainwater will not accumulate on the surface, and the grown grass will strengthen the position of the track on the ground.

Another interesting option is the creation of a staircase from tires on a personal plot. Suitable for summer cottages that are on a slope. The tires are slightly sunk into the ground and stacked from the bottom of the soil to the top. The soil is poured inside. And so that the steps do not slip in the rain, a thin layer of gravel is poured on top.

Thematic material:

We make curbs from tires

Small fences of different heights are obtained from this material. Often, used tires from the rest of the yard are fenced off a flower bed or a children's playground. It is enough just to cut the tire in half with a jigsaw or knife, cut it sideways to dig it into the ground.
And to make the borders look beautiful, they should be painted, applied with interesting patterns, drawings.

Photo gallery of finished tracks and border

We offer you to look at different ways of using tires as a material for garden paths and borders:

Photo: excellent use of old rubber

As it turned out, even such unnecessary products as old tires were found useful application... And what is even more pleasant is to save a significant amount on the purchase of building materials and to improve the suburban area practically for nothing.

The summer cottage is exactly the place where many old and unnecessary things, after alteration or restoration, begin their new life... This includes furniture, kitchen utensils, and clothing. They find use in a suburban area and unnecessary car tires. What skillful summer residents do not make of them: swings, flower beds, sandboxes and even small pools. Today we will talk about another option for using old car tires - arranging paths in the garden with their help.

The main advantage of rubber on car tires is its high quality... Even old tire does not lose its increased resistance to external influences and perfectly tolerates both various kinds of precipitation and the influence of low and high temperatures.

• That is why a garden path made of a car tire will not crack during winter frosts, will not get wet from a spring rain and will not deform in a sultry summer.
• Having spent time once, you will provide yourself with a comfortable and reliable surface for paths in the garden for several years. Another advantage of the tire track is ease of maintenance. It is enough just to sweep away the debris, pour water from a hose or a watering can - and your garden path shines again with cleanliness.
• Rubber does not absorb moisture and dries quite quickly, so even after heavy rain, you will very soon have a dry coating in the garden.
• Car tires are quite slip resistant, it is almost impossible to slip and fall on them, but even if this happens, the rubber will significantly soften the impact and reduce possible injury.
• Well, and the most important advantage of the rubber track is its ease of creation.

If you, having appreciated all the positive qualities of rubber, decided to use automobile tires in the arrangement of tracks on the site, you have two options: to make a covering from old car tires or to use rubber tiles for these purposes, which is a product of recycling those very tires.

Tire tracks

To create a garden path, we need old car tires. It is desirable that they are all the same size. The amount required will depend on the total length of the tracks you plan to cover. If the tracks are wide enough, you can use truck tires.

In each tire, we will need to separate the treadmill - tread (pictured above). This will require a sharp knife, some oil or soapy water, and a proppant of some kind.

• With a knife, gradually cut off the sidewalls on both sides of the tire in a circle. To make the knife easier to cut through the rather dense rubber of the tire, it should be regularly dipped in a container with oil or soapy water.
• We need to insert our riving device behind the knife. This can be an adjustable wrench, a pry bar, or just a piece of wood.
• After cutting off the side parts of the tire, we have a rubber band.
• Having cut it, we get a cover for our future track.
• Having typed the required number of protectors, we proceed to laying the canvas. Depending on how wide the garden path will be, two to four strips may be needed at the same time.
• Align the ribbons in length and nail the edges to wooden board or a bar, as shown in the photo. The distance between the tapes should be 1-2 centimeters. Grass will sprout in these gaps over time. It will perfectly keep the garden path from shifting.
• In places where the wooden parts of the paths will be located, it is necessary to dig small depressions. This will help prevent the edges of the rubber from picking up.

At this, the installation of a garden path made of tires can be considered complete.

Rubber tile tracks

Now let's talk about the second option for arranging paths in the garden. For this we need a special rubber tile. The materials for its manufacture are all the same used car tires.

To begin with, they are crushed, and then from the resulting crumb rubber form tiles of various sizes, thicknesses and colors. Many summer residents have already appreciated such a coating, and it continues to gain more and more popularity.

The rubber tile retains all the properties that it possesses car tire... It is clear that the acquisition of such a coating will require additional costs, but such a garden path will look much more beautiful than just tape from tires.

A wide range of tile shapes and colors will allow you to create paths that are most suitable for decorating your site.

Installation of the coating is not particularly difficult. The design of the tiles provides for fastening with bushings or special locks.

The only point to consider when buying is the thickness of the tiles. Thinner tiles (up to 20 mm) require the preliminary creation of a hard surface in the places of future paths.

It could be

• cement strainer
• asphalt pavement
• wooden flooring.

Already existing coatings are suitable as a basis.

• To do this, it will need to align all the grooves and bulges on it and repair cracks and chips formed under the influence of external factors.
• The surface of the base is thoroughly cleaned and treated with a mixture of acetone and polyurethane glue in equal amounts.

A thicker coating does not require such solid preparatory work... If the thickness of the tiles is more than 30 mm, it is allowed to lay them directly on the ground or on a 5 cm layer of sand.

If you want your track to last much longer and at the same time have a good appearance, prepare the base in three layers before laying the tiles.

The constituent bases

• compressed soil as the first layer
• rubble
• sand and cement in a 3: 1 ratio.

When laying rubber flooring without preparation of the base, water will escape in a natural way therefore there is no need to create artificial drainage. You can complete the work by installing rubber borders. They will not only improve the overall appearance of the tracks, but also serve as their additional fixation.

Rubber tracks are great way provide convenient and safe movement around the site without significant costs. See the video for crumb rubber tiles.