What can be cooked from squid: quick and tasty

Do-it-yourself shed: 110 photos, drawings, diagrams and projects best designs for construction. Do-it-yourself shed from a profile pipe

How to build a strong shed from corrugated board with your own hands? + Video

Foreword

Profiled sheeting quite rightly refers to the popular building materials used everywhere. Lightweight and durable, easy to install - isn't that what you were looking for? Let's figure out how to build a shed from corrugated board with our own hands, what advantages and disadvantages it will have!

A shed from a professional sheet - we select the right one!

Since its invention in the 19th century, profiled sheet or corrugated board has been used both as a roofing material and as a wall building material. For a shed, a wall type with a thickness of 4 mm is best. As a rule, the dimensions of the sheets are standard - 2 meters in height and a meter in width, which is quite suitable for an ordinary shed or utility block. Of course, a shed made of one profiled sheet will be very cold, but nothing will prevent us from insulating it. If you are confused by the thinness of the sheets of material - suddenly some attacker will make a hole in it in order to steal something - then in this regard you can also be calm, since the profiled sheet is a very noisy material, and do any operations to dismantle it quietly is simply impossible.

In addition to professional sheets, we will also need wooden beams 100 * 150 mm, boards 50 * 150 mm, fittings, fixing angle, doors and windows, self-tapping screws for metal, screwdriver, level, shovel, saw and scissors for metal. The bars are needed to create the frame, although the corrugated board can be screwed to metal profiles, but they will cost much more than wooden building materials.

Before starting work, all wooden elements should be treated with an antiseptic in order to protect them from decay, and processing with fire retardants - means that will protect the wood from fire - will not interfere.

While the tree dries up, you can think over the location of the future barn on your site. The best option would be a small mound or just an elevation - thanks to this, the problem with the arrangement of the sewer drain is solved, if this, of course, is, in principle, necessary.

How to make a shed from corrugated board - foundation and floor

As in the construction of any facility, it all starts with laying the foundation. At the chosen location, first clear the site of turf and topsoil - a total of about 50 cm deep. On this site, fill in a cushion of gravel and sand, which is then pressed down with a layer of rubble. After tamping the last layer, we make reinforcement, formwork and fill it with concrete. It is best to build such a foundation if you plan to make a barn for animals.

Once the concrete has completely hardened, which will take several days, concrete blocks can be installed around the perimeter, which will become a solid foundation for the walls. The upper edge of the blocks should be strictly in the same plane, since you will also be installing the floor on them. The frame for the floor can be made of a bar - after the frame is ready, you will need to lay crossbars across it every 30-40 cm.For a strong connection, it is enough to twist all the parts with self-tapping screws and fix with corners.

You can sew up the prepared frame with any material that is at hand, be it plywood or ordinary boards. For fixing, we use all the same screws, trying not to leave gaps and cracks. If you use boards, then they must be well dried without fail - otherwise they will dry out already in place, forming cracks.

How to build a barn - frame, walls and roof!

Before embarking on such a crucial stage, draw up on paper at least a primitive drawing on which doors and windows will be indicated - so that you yourself will not get confused later. It is better to cut the timber in stages, cutting the same parts, for example, corner and vertical posts. The racks must be installed at a distance of no more than 70 cm from each other. The height of the racks must fully correspond to the height of the future barn. For this element, select only solid timber. Then horizontal bars are attached - they perform the function of strengthening the structure and serve as the direct basis for the corrugated board. Perhaps, in the topic: "How to make a barn from corrugated board", these works are the most laborious.

Starting from the longest sides, proceed with the installation of the profiled sheet. When fixing the material with self-tapping screws, use at least six units per 1 m2. The sheets should be fastened with an overlap of at least 2 cm. If you plan to make a warm shed from a profiled sheet, then the installation of vapor barrier and insulation can be carried out after the main frame work. It will be convenient to fill the space between the racks with insulation - foam or mineral wool, which are laid from the inside. You can sew up the insulation as the same wooden planks, and clapboard - depending on how much you are willing to spend on the barn.

After that, it's just right to start building the roof. The easiest way is to make a pitched roof - much less material will be needed for such material. But this has a significant disadvantage - you will not have an attic! To simplify the process, the same corrugated board can be used as a roof. True, experts recommend paying attention to the material with a polyester coating, since such profiled sheets are more resistant to rust, and their appearance is more attractive.

For the roof, you also need to make a crate, placing the beams or boards at a distance of at least half a meter from each other. Otherwise, the same rules for installing a profiled sheet are applicable to this type of roof: mount with an overlap, fasten with self-tapping screws, insulate with foam and sew up with plywood. Doors and windows are quite an expensive pleasure, so each owner needs to decide for himself how he will act. There are not very many options: use old windows and doors, order new ones, or buy a finished product made of wood, plastic or metal sheets. If valuable equipment is stored in this structure, then do not stint on nice castle with a complex defense system - an ordinary barn can be broken in less than a minute.

Photo of a shed made of corrugated board, s-taurus.ru

In the photo - corrugated board for the construction of a barn, ruscraft.net

In the photo - do-it-yourself shed made of corrugated board, dv0r.ru

In the photo - a shed roof of a shed made of corrugated board, smogu-sam.info

Photo of corrugated board for construction, proflist-krasnodar.ru

nasotke.ru

The finished barn project. We build a shed from a profile pipe with our own hands: tips and recommendations

The house can be stone or wooden, one-story or multi-story. But the presence of only one residential building, albeit very comfortable and cozy, will not be enough for permanent residence outside the city. It will be necessary to store garden and agricultural tools, any blanks and other equipment, which, as a rule, are not placed in the house. Finished project a shed for a summer residence made of corrugated board For these purposes, a shed will be required, since not a single site outside the city can do without at least one non-residential outbuilding.

To build a barn, it is not necessary to involve construction firms or teams of professional workers; it is quite possible to erect it with your own hands. Many different ways and from absolutely different materials eg metallic.

Benefits of metal sheds

Such a barn can be given an original appearance and design, it will be different the highest degree its reliability and ease of installation. Compared to sheds and, it will stand out for its strength and will not require any specific knowledge and skills for construction.

An example of a prefabricated metal shed for a home or summer cottage

The galvanized surface is known for its reliability during operation, it will protect the metal shed from adverse weather conditions and metal corrosion, and the reinforced roof of such a structure will withstand winter snow blockages. This practical hand-made design will become simply irreplaceable on any summer cottage.

In addition, metal, unlike wood, does not allow moisture to pass through itself, which will allow you to store property in the barn throughout the entire calendar year and not be afraid for its safety. Such a shed can also act as a garage if a motorcycle, moped or bicycles are available. In addition, it is also suitable for storing firewood, since it will protect them from moisture and will not allow them to become damp.

Choosing a place to build a barn

Before the start construction works, you will need to choose a place where the metal shed will be built.

Preparation of the site and installation of a shed frame made of metal pipes. Each owner determines it independently, depending on his personal preferences, based on the size of the site. If you care about the appearance of the site as a whole, it will not be advisable to build a barn in the most conspicuous place in front of the house. It is advisable to choose the optimal territory so that the house obstructs the shed as much as possible.

At the same time, a metal building can be painted with your own hands with your favorite type of paint and in any color, which will help it merge as much as possible with environment and harmoniously fit into the design of the site. One has only to make sure that the shed is not located in a lowland, where excess water accumulates from excessive precipitation.

Of course, many materials and tools are now available that increase resistance to undesirable weather conditions, but too frequent contact with moisture will still not benefit the building.

klump.ru

Do-it-yourself shed - projects, materials and tools (110 photos)

Every self-respecting owner of a private house tries to ennoble his site. For this, an economic block is needed, where the gardening equipment will be kept, and the working area will be located. To build it, you need building material.

But often it is not advisable to invest large sums in this enterprise. What can you quickly build a barn from at no extra cost?

Construction planning

The first step is to determine the location for your building. It is best if the building will stand at a distance from the entrance to the house. The distance between the barn and the residential building is due to the purpose of the utility block.

It is better to build a storage room for tools in a remote area of your territory. If this is a woodshed, it is advisable to place it closer to the house.

At this stage, the type of structure and its parameters are determined. The easiest and cheapest construction option is to use edged boards.

The main advantages of such a structure:

the speed of the work performed;
affordable materials;
optimal configuration.

It is most reasonable to erect a structure on the site least suitable for the cultivation of horticultural crops. There is such a place in every household.

It is worth considering the specifics of the location of the remaining parts of the land plot, be sure to take into account the parameters of the structure being built, its appearance. Try to make it harmonious with the surrounding landscape.

Building a barn

The simplest and cheapest structure is a frame structure. Nothing can be built faster than this structure. This does not require the profession of a builder and special skills.

Let's get acquainted with the step-by-step instructions for building a regular barn:

Before starting construction, it is necessary to make a drawing of the object. Guided by this scheme, markings are made on the site. The place for the construction of the barn is cleared of debris and vegetation.

We make a cavalier from crushed stone and gravel of at least 15 cm. By marking, we dig holes and install racks, having previously filled each hole with gravel, then fill it with a solution of concrete.

You build a budget option, therefore, the racks will be the basis of the frame. The end of the pillar, which we bury in the ground, is lubricated with bitumen and wrapped with roofing material.

To make the roof of the shed shed, the front supports are prepared somewhat longer. The resulting slope of the roof will protect the walls of the building from rain.

Next, we install transverse fasteners from a bar for frame rigidity. Usually, the frame is covered with a sheathing board, with cut grooves, or with a slab. Nailed boards in a vertical or horizontal position. To get rid of gaps, the boards are overlapped.

The procedure for attaching the cover is shown in the photo of the barn with your own hands.

The final stage is the covering of the structure. The most budgetary roofing building materials are slate and roll-up waterproofing roofing material.

First, a lattice is made on the floor supports: from plywood for roofing material and from a board for slate. Roofing is laid under the slate.

Now you can go to interior decoration... The floor and ceiling are ennobled with a board or sheets consisting of wood shavings (OSB).

To build a warm shed on your own, you should double the cladding. The resulting voids are filled with thermal insulation. Suitable for this mineral wool... But it is cheaper to use sawdust.

Household block made of profiled sheet

You can build a cheap and practical structure from a corrugated sheet. This material is relatively inexpensive, lightweight and easy to use. The only drawback is its lack of rigidity. Additional reinforcement of the frame is required.

In essence, the profiled sheet construction is a conventional frame shed. All the difference is in the skin. The base is also built of wood, but it is best to prefer a profile pipe. The costs will certainly increase. But this design will last longer.

The installation of the frame from the profile is carried out by welding. In some cases, craftsmen tighten the components with a bolt fastener.

For cutting sheets, it is allowed to use a grinder, but it is better to cut off the burnt place of the edge with scissors.

To actually build an inexpensive barn, first take a look around what materials are already available. After that, decide on the type of building.

Do-it-yourself photo of sheds

mojdominfo.ru

Do-it-yourself shed drawings, list, building material, video, photo

One of the most demanded elements of private households or just summer cottages is what other than a barn. Some people prefer to call this structure a household block, however, its essence does not change at all from this. The function of the described structure is to store a variety of summer cottage tools, for example, tools for working in the garden, as well as various products. The design of such a structure is quite simple, and its dimensions can be called modest, therefore anyone who wants to be able to build a shed with their own hands, having developed drawings, as well as making a list of necessary building materials. Meanwhile, it is worth carefully studying the theoretical component of this issue, so as not to subsequently face the negative consequences of one's own incompetence.

The main task is to select the optimal material

As you know, more than half of the success in the construction business depends on the choice of material. The operational, technical and aesthetic properties of the product determine not only the complexity of the planned work, but also the scope of the structure itself. In addition, the operational life of the construction largely depends on the building material.

Follow tradition

Despite the fact that suburban housing construction is gaining more and more popularity every year, it is worth noting: people have always tried to acquire at least modest, but charmingly functional real estate outside the city boundaries. Thus, today a certain tradition has been formed in the choice of building materials for buildings such as a barn. So, in the domestic market, you will be offered the following options:

Wood. Well, this solution is fair to call the most simple and common. The structure in this case is erected within a couple of days, and as a roof you can lay inexpensive slate or even roofing material.

Profile pipes or corrugated board. In this case, it is worth noting the very democratic cost of the product and the simplicity of its installation.
Stone or brick. Of course, each of us will only want to ask about the need to build a hzdblock once and not return to this issue for decades. In this case, a stone or brick will be the best solution. However, their installation is somewhat more complicated and involves compliance with a certain system of requirements and norms.
Plastic. Structures of this type can generally be purchased assembled. You can also buy a special assembly kit, its cost is very affordable, and the installation process itself will take no more than a couple of hours.
OSB plates. If you do not want to waste time pouring the foundation, then OSB slabs will suit you in the best way. Building from of this product doesn't need a foundation at all.
Bars. While striving for the aesthetics and durability of a barn, you may be faced with a proposal to build it from a barn. Meanwhile, do not forget that this product is an order of magnitude more expensive than its predecessors on this list, and working with it requires a certain level of qualifications and experience in the construction industry.
Pallets. From this material, you can easily whip up a summer shed. The cost of which will be minimal.
Frame. Practice shows that frame structures are least susceptible to shrinkage.

There are many less common options.

Of course, this is just not a complete list of products presented by both domestic manufacturers and their foreign counterparts. Their differences lie in cost, properties, types of installation and many other parameters. Consult with a specialist to determine exactly what type of product is best for you.

Project creation

Before proceeding directly to the implementation of construction operations, it is necessary to carefully develop a project for the future building. If the project involves the presence of a foundation, then you will have to contact the appropriate authorities to register the building. In this case, it is better to enlist the support of professionals, it can be both design and construction organizations. If you refuse the foundation, then the stage with registration in the BTI can be safely skipped and you can start developing the drawing. With the help of a ready-made drawing, you will also be able to easily calculate how much materials you need to bring the project to life.

Remember that the calculations are carried out mainly on an individual basis. However, for convenience, you can take the standard parameters: 3x3, 3x4, 3x6, 5x5 meters.

Without sacrificing functionality

The wide functionality of the premises is what you should strive for when creating a building project. Of course, the number and purpose of the premises varies depending on the function of the shed itself. Nevertheless, as a rule, such buildings have a certain set of zones for this purpose:

workshop, storage room for tools;
warehouse of accessories for construction and work in the garden and in the garden;
a special room in which you can place a trailer, walk-behind tractor and similar equipment;
summer bath or additional shower;
a room that contains firewood, hoses and other items.

For many of the things that we keep in our summer cottage, you need a dry and safe place. Otherwise, the storage process will quickly nullify the performance of the fixtures or products, which, in turn, will entail unnecessary financial costs.

Making a list of materials and tools

In this case, everything depends largely on functional purpose utility block. However, even if you plan to create the most ordinary woodshed with your own hands, then you will need a standard set of accessories:

a screwdriver or its automated analogue - a screwdriver;
drill;
roulette;
construction plumb line;
several different sized hammers;
a shovel to dig a pit if you are pouring a foundation;
hydro level.

If the scheme of your utility block is designed to use corrugated board as the main building material, then you also need to acquire, in addition to the profiled sheet itself, also shaped pipes, which will become the source for the building frame.

The main stages of work

So, it is not a secret for anyone that with a careful and competent breakdown of the entire process of erecting an architectural and functional structure, at certain stages, a much better result can be achieved. Since the price factor is one of the main ones when choosing a building material for a structure, it is possible, as an example, to consider the technology of erecting a utility block from a metal profile. You have to carry out the following types of work:

Pouring the foundation. The most popular solution in this matter is a strip foundation with a shallow depth. It will be enough to dig a pit, the depth of which will be about three meters.
In the process of preparing the pit, in parallel, you should dig a shallow trench, 30 centimeters is enough. Reinforcement rods are placed in the trench, which are subsequently poured with concrete.
Creation of the structure overlap. Here you can save money and lay a beam on a belt made of reinforced beams, and lay a wooden flooring on top. If there is no need for special savings, then install factory slabs, install formwork elements and high-quality reinforced concrete floors.
Installation of the frame. As a building material, you can take a tree or pipes from a profile. Install first bottom rail, then mount the first layer of the selected product. Secure the parts with anchor bolts.

Installation of the main building material. If you want to make your barn "for centuries", then at this stage it is worth contacting specialists who will help you install the product sheets in the optimal way.
Filling the floor. Most commonly used cement mortar... It is also possible to install wood for a more aesthetic interior.
Remember to fit windows and doors in the proper places before installing the roof.
The final stage is the installation of a pitched roof.

If in doubt about your own abilities, seek advice from more experienced workers. They will be happy to help you not only with the development of the structure scheme, but also with the subsequent stages of preparation, as well as directly with the implementation of what was conceived in practice.

jsnip.ru

Do-it-yourself shed for a summer residence

If you are the lucky owner of a summer residence or country house, then sooner or later you will light up to build a barn on the site with your own hands.

Some summer residents claim that they do not need outbuildings at all, but over time it becomes clear that you cannot do without a barn, even if your summer cottage serves you exclusively as a place to relax.

If you do not grow a garden and vegetable garden and do not breed chickens and other cattle, then the shed will come in handy for storing trestle beds, hammocks, barbecue, country furniture and much more.

Therefore, it will not be superfluous to know how you can make a shed with your own hands. This article provides instructions on how to build a shed with a gable or gable roof with your own hands from foam blocks, firewood or other building material.

Important nuances

To build a shed for a summer residence with your own hands, you need to take the process seriously. It is necessary to plan the construction of a barn very carefully, having completed the drawings and all the necessary calculations in advance.

It is important to take into account in advance what function it will perform - it will be a workshop, a chicken coop or a shed for other cattle, or maybe it will serve as a place for storing various country utensils or firewood.

A good location is very important. You are building a barn for more than a dozen years, so you need to fit it into the overall landscape.

It is convenient for some to place it closer to the house (if, for example, this is a building for cattle), and someone prefers to place utility blocks in the depths of the site so that they are unobtrusive.

In any case, choose a location that is unsuitable for gardening.

As for the choice of material, here it is worth considering how much time and amount you are willing to allocate for the construction of such a shed with your own hands.

A country shed from boards, blocks, timber or corrugated board can be built in just a couple of days, but a brick shed will require much more time.

In addition, for the construction of a shed, slab cuttings, profile pipes, metal profiles, different types of timber and blocks, and much more are used.

You can cover the building with a pitched or gable roof, depending on your desire and capabilities.

So, if you are interested in how to build a shed with your own hands, then first you need to figure out what types of sheds there are.

Even inexperienced builders can build such a building. This is one of the cheapest and fastest ways to build a summer cottage from blocks or other scrap materials.

Having spent a very small amount of money and a couple of days, you will get a convenient outbuilding that will serve you for about 10 years.

We will describe step by step how to build a frame shed with your own hands. After you have created the necessary drawings, free up space for the building and cover it with gravel or screenings.

The ends of the timber, which will be in the ground, are wrapped with tar paper, which will also protect the wood from damage. The pillars of the back wall are made slightly shorter than the front ones.

We will need this for the construction of a pitched roof. Next, we make the bottom and top strapping... To do this, we nail 4 beams 50 by 50 mm to the posts using a building level.

In the middle of the distance from the upper to the lower bars - 4 bars are nailed. After that, boards are vertically nailed to the entire structure. Installation of a slab is possible instead of boards.

Using a slab will give you the opportunity to save a significant amount. The next stage of construction is the construction of a pitched roof.

As rafters, 3 bars are used, which are nailed at the same distance to the upper bars. Then they are beaten with the help of boards or slabs, and roofing material is applied on top.

From above it is fixed with bars. After working with the roof, a floor is laid in a newly made shed, for example, from OSB slabs, and then shelves are made from boards or a profile pipe.

Another option for a frame shed can be built using a metal profile or special blocks. To do this, use an ordinary metal corner, which is sold in many hardware stores.

You can fasten the corner in any way convenient for you.

Pipes can be used as material for the frame. The structure of the profile pipe will also be quite strong and stable, moreover, it will last longer than a wooden one.

The frame structure can be used to store garden utensils, firewood, tools, and more.

A shed made of corrugated board is one of the options for a frame shed for a house or summer cottage.

It is very simple to build a shed from corrugated board with your own hands, therefore, recently, many summer residents have chosen this option for their summer cottages.

The corrugated board is very light, it is very simple to make such a building in the country alone.

In addition, it is now on construction market profiled sheeting of the most different colors, as well as galvanized corrugated board.

The only drawback of corrugated board is the weak rigidity of the structure. Therefore, it is better to make the spans of your frame smaller than for a wooden one, and strengthen the floor.

The frame for such a building can also be made from a profile pipe. It can be bolted or welded.

Using a profile tube for the frame will help you save some money. It is best to cut corrugated board with a grinder or special scissors.

Of course, it will be faster to cut it with a grinder, but after it there are ugly "burnt" marks on the edge, so it is worth considering this moment.

An ugly edge can be hidden below or under the next sheet of corrugated board.

The metal profile is fastened with special galvanized self-tapping screws for the metal profile or with ordinary galvanized self-tapping screws.

The upper sections of the walls are hidden under the wave of the corrugated board on the roof. The corners are also hidden under a special metal corner.

It is better to install both the roof and walls on special gaskets so that the corrugated board does not make noise from wind and rain. Correctly lay sheets of corrugated board with an overlap in two waves.

The easiest way to make the roof of a shed made of corrugated board is to make a single-pitched one. Any floor in such a barn can be made - wooden, osb, concrete or even a bulk floor. It all depends on your budget and needs.

This type of barn is mainly for storing tools for the garden and home, firewood, etc.

A do-it-yourself wooden shed is also not very difficult to build. Such buildings for summer cottages also have a frame base, which is then upholstered with boards.

This structure will have a fairly rigid structure. Its cost will be very low, and the construction speed is high.

It is also very easy to build such a barn alone. Wooden structures most often used for storing various garden utensils or firewood.

As a base, you can use wooden blocks or pallets. The pallets will act as the shed floor. If the base of the barn is bars, then the floor will need to be laid by yourself.

To do this, you can use boards or an OSB plate. The roof on such sheds is most often pitched, as it is very easy to make.

From above, the roof is covered with roofing material, and if funds permit, you can cover the roof with tiles or slate.

To increase the service life wooden structure from a bar, it should be treated with special agents that protect the wood from fires, fungus, mold and pests.

If desired, the erected building can be painted in any color or varnished. As a result, you will get a nice wooden room for storing firewood or other items needed on the farm.

If you want to build a country shed that will serve you for more than a dozen years, then step-by-step instructions on how to build a foam block shed with your own hands will come in handy.

A country shed, built from foam blocks, is useful not only for storing firewood, tools and various utensils, but also for breeding various animals in them - chickens, pigs, goats, etc.

If you do everything right, then a foam block building can last you up to 30 years. True, not everyone will be able to build a shed from foam blocks at their dacha with their own hands.

Some have to seek help from specialists. A shed of blocks is not cheap, given the price of foam blocks and the cost of work.

Before starting work, you should definitely make a drawing of your future structure, thanks to which you can calculate the exact number of foam blocks required for construction.

If, after calculating the cost of all the blocks, you still see the point in building from foam blocks, then proceed to construction.

The construction of a building from foam blocks should be started with laying strip foundation... The foundation will help protect the foam blocks from soil moisture.

In addition, using a foundation will also help to make the block structure as heavy as possible - you can make a roomy attic on the roof or a place to relax, dry clothes and much more.

The surface of the foundation should be covered with a waterproofing material, for example roofing felt. After that, the blocks are laid on the cement mortar.

They start laying blocks from the corners, which are laid clearly in level. Then the walls are erected. The roof can be pitched or gable.

Of course with shed roof much less work, but gable roof allows you to use free space to the advantage.

The floor can be left concrete, or you can lay the floor from boards or OSB slabs.

If the plan has shelves for storing firewood or garden utensils and tools, then you can make them from a bar or a profile pipe. Such shelves will also serve you for many years.

How to save money on construction?

Self-construction will cost you several times less than if you hired craftsmen for this.

Therefore, if you have even a little experience in construction, you should try to make such a construction yourself.

You can save money not only at work. Before starting construction, be sure to calculate the cost of all necessary materials.

If you make the building half a meter less than planned in advance, then you will see that you can save a considerable amount on these centimeters.

If you need a small shed for firewood or tools, is it worth making a large building?

You can also save on material. You can, for example, buy a previously used material - foam blocks or bricks.

If you plan to putty a building from a foam block, then strangers will not find out that you have not used new materials.

A wooden shed for firewood can be covered with previously used slate.

The floor can be made not only concrete or plank.

For example, if you plan to breed some kind of living creatures in your building, then a bulk floor will be very useful for them.

So, after reading the article, you were able to find out how to build a barn in your country house with your own hands. Hopefully this information turned out to be useful to you.

stoydiz.ru

A shed is always necessary, you must agree. Where is it better to keep the tools for work so that they are always at hand and do not interfere with this? The answer is in the barn. Where to store the irrigation hose or stored building materials? In the barn, of course.

Modern manufacturers offer us a huge selection of materials that can be used in the construction of a shed. They differ both in their technical characteristics, and cost. The most practical material, as practice shows, and the most economical of all existing today is a completely innovative material - corrugated board.

A shed built using corrugated board will be inexpensive, will last a long time, and will also become a structure that will be an additional decoration of the site. Therefore, many owners of personal plots quite often ask themselves how to build a shed from corrugated board with their own hands, without involving third-party contractors in the construction.

Benefits of using corrugated board

If we compare more modern corrugated board with more traditional types of materials, it has a number of qualities and characteristics that make it so popular among consumers:

ease;
strength;
easy to use;
ease of installation;
durability;
originality.

Speaking of originality, one cannot but say that a shed built using corrugated board as the main material will become an attractive structure that can be built very quickly without spending a lot of time and effort and saving your finances.

Choosing a place for a barn on the site

It is clear that before starting construction work, it is necessary to prepare for them. And the first step preparatory work will be the choice of a place on the site where the barn will stand. You should not install the structure in the immediate vicinity of the country house, because not only tools can be stored in the shed, but also chemicals that may be harmful to health.

The site has been found, it must be cleared of debris and the topsoil no more than 50 centimeters thick to be removed. In the barn, you can provide a basement for storing supplies, in which case you will have to dig a hole and line it. If there is a need to lay a sewer drain, this also needs to be taken care of at this stage.

The next step will be drawing up a drawing of the future structure. You can always try to do it yourself, but if it's too difficult task, you can always use a ready-made scheme.

Materials and tools

Since we are building a shed from corrugated board, it is clear that the main material that we need is corrugated board. For this type of work, wall sheeting is most suitable, the thickness of which is at least 4 millimeters. The dimensions of the sheets of corrugated board are always standards and are 1m by 2m, so the required amount of material will directly depend on the size of the finished building.

In addition to the corrugated board itself, we will need the following materials to build a barn:

metal fittings;
blocks for the construction of the base;
different kinds self-tapping screws;
for interior decoration, plastic siding or other materials;
mounting angle;
edged board measuring 50 by 150 millimeters;
a bar of wood 100 by 150 millimeters;
sand;
gravel;
window;
doors.

Construction tools:

plumb line or level;
saw;
hammer or screwdriver;
you will need a shovel to prepare and clear the place.

In order for the barn to serve long enough, before starting construction, it is necessary to treat all used wooden parts of the future structure with special antiseptics. Such a precautionary measure will reliably protect the barn from unwanted premature damage.

Shed foundation construction

Any construction work, including the construction of a shed from corrugated board, begins with the construction of the base, the foundation of the building. This work is quite simple, so there is no need to involve outside specialists.

After the place for the shed has been determined, the top 50 centimeters of the soil have been removed, it is necessary to equip a pillow on the resulting surface. To prepare a pillow, ordinary sand and gravel are used, on a layer of which rubble is laid. A layer of rubble must be thoroughly tamped.
We put reinforcement on the prepared cushion of sand, gravel and carefully compacted rubble.
Fill everything with concrete solution.

Before starting the next stage, you must wait until the concrete solution finally hardens. After waiting for the solution to dry completely, we install concrete blocks around the perimeter of the structure, which will play the role of the base. Using a plumb line, we check that each upper point of each installed unit was exclusively in one plane.

We make a frame from a bar, which will become the base for the floor in the barn, and install it directly on concrete blocks.

It's time to build the frame of the barn. We determine and cut the amount of timber that we need. A regular saw is perfect for slicing. We make vertical racks from the prepared timber, the distance between them can be up to 70 centimeters. On the vertical posts, you need to install and fix the transverse crossbars with self-tapping screws. As a rule, the step width between the rungs does not exceed 40 centimeters. We fix the resulting shape by installing a metal corner, which is attached using the same screws.

We sheathe the finished frame using any available materials (chipboard, plywood, simple boards), which we fasten with self-tapping screws. It is important not to leave gaps and crevices when fastening.

Building walls in a barn

The walls in the shed will be corrugated board, the installation of which, as a rule, must be started from the longest wall in the structure. Fastening of the corrugated board is carried out using self-tapping screws and a screwdriver. It is not necessary to use more than six self-tapping screws per square meter when fixing the corrugated board. Installation of sheets is carried out with an overlap.

If you assume that the barn you built will be a structure not only reliable, but also warm, then you need to worry about vapor barrier and thermal insulation. Why should a heater be installed in the voids between the vertical posts and the sheathing made of corrugated board, it can be mineral wool and a vapor barrier.

For interior wall decoration, we need plastic siding, which we have prepared, but other types of materials prepared in advance can also be used, their choice depends on the wishes and capabilities of the shed owner.

We build a roof

For a barn, as a rule, a gable type of roof is used, which, if necessary, can always be insulated.

Roofing material, it can also become a professional flooring. And if a corrugated board made of galvanized steel is perfect for the construction of walls, a corrugated board covered with a polymer layer can be used for the construction of a shed roof. Such a precautionary measure, although it will cost a little more, will reliably protect the structure from the harmful effects of such unwanted corrosion.

To fix the corrugated board, you first need to equip the crate, for which you need a bar. The material for the roof is also overlapped and fastened with self-tapping screws. The best choice would be self-tapping screws with a rubber gasket, which will provide an additional level of sealing at the joints.

Again, if the shed is warm, we install heat and vapor insulation, which we sew up with prepared plywood.

Floor making

At the last, final, stage of construction of an outbuilding on the site, it is necessary to make a floor. Why do we need boards. We fasten them with nails or using self-tapping screws.

We install windows and doors. Do-it-yourself work on the construction of a shed from corrugated board can be considered dead. As it turned out, it is not difficult at all, does not take a lot of time and does not take up energy.

Video barn made of corrugated board with your own hands

fundamentt.com

How to make a shed from corrugated board with your own hands? :: SYL.ru

On a suburban area or on adjoining territory a private dwelling cannot do without a barn. It can store tools and equipment so that they do not get in the way and are always at hand. It is in the barn that building materials and irrigation hoses are stored, as well as other equipment. Modern manufacturers offer materials in a huge variety. They can be used for the construction of outbuildings. However, few decide to purchase expensive products for this. Quite often, people use the leftover materials to build garages and sheds.

The most practical and economical material of all the others is corrugated board. The shed, built with its help, will last a long time, and will be inexpensive. Such a design can become a real decoration of the site, if you approach the work with the utmost seriousness. Therefore, many owners of private territories are thinking about how to build a shed from corrugated board.

Seat selection

If we compare modern corrugated board with traditional materials offered on the market, then the first solution has many advantages, among them should be highlighted:

strength and lightness;
ease of installation;
ease of use;
originality of appearance;
durability.

If you decide to follow the experience of the majority and use corrugated board for the construction of a makeshift or any other outbuildings, then at the first stage it is necessary to carry out preparation. It will be important to choose a location on the site for construction. The building should not be located near country house, because the barn can store not only tools and equipment, but also chemicals that are harmful to human health.

Before starting to build a shed from corrugated board, it is necessary to clear the area of debris, remove the top layer of soil, deepening 50 cm or less. The building may include a basement for storing supplies. In this case, a hole should be dug and its inner walls should be lined. If you need a sewer drain, you should take care of this in advance. In the next step, you can prepare a drawing that you can complete yourself.

Preparation of materials and tools

If you decide to build a shed from corrugated board, then the main material will be a wall steel sheet, the thickness of which is 4 mm. The size of the sheets is standard and equal to 1x2 m. Therefore, you can calculate the required amount of material, knowing the size of the finished building.

In addition to the corrugated board, you need to take care of the availability of the following materials:

metal fittings;
self-tapping screws;
mounting angle;
timber;
gravel;
doors;
blocks for the base;
siding;
edged boards;
sand;
windows.

As for the interior decoration, siding can be replaced with any other material that you may have left from the construction of the main house. Edged board must have a cross-section within 50x150 mm. When choosing a bar made of wood, you should prefer one with a cross-section of 100x150 mm.

As for the tools, among them should be highlighted:

plumb line;
hammer;
saw;
shovel.

The plumb line can be replaced with a level. In order for the shed from the corrugated board to serve as long as possible, before starting work, all wooden parts of the future structure should be treated with antiseptics. This measure will protect the building from premature damage.

Erection of the foundation

Whatever it was, all construction work begins with the construction of the foundation of the building. This work is not difficult, so you don't have to involve specialists and use equipment. Once the location for the shed is determined, it is necessary to remove the soil and equip a pillow on the surface of the pit. Sand and gravel are used for it. A layer of crushed stone is laid on top. It must be well sealed.

For preparation, you need to lay the reinforcement, and then install the formwork and fill the floor with concrete. Before proceeding with the construction of a shed from corrugated board with your own hands, you must wait until the concrete hardens. Concrete blocks are installed along the perimeter of the structure and after that, which serve as the base. It is necessary to check with a plumb line or level that the upper points of the blocks are in the same plane.

A frame should be made from the timber, which will act as the base for the floor. The frame must be positioned directly on concrete blocks... Now you can start building the frame.

Making a box

To complete the frame, you need to prepare a bar; a regular saw is suitable for cutting it. Vertical racks are made of this material, the distance between which should force 70 cm. Cross bars are installed and fixed on the vertical racks using self-tapping screws. The distance between the latter should not be more than 40 cm.

When building a shed from corrugated board with your own hands, you must install and fix the resulting shape using a metal corner, which is attached with self-tapping screws. The frame is sheathed with any of the available materials, namely:

plywood;
simple boards.

The sheets can be fastened with self-tapping screws. In this case, it is important to exclude gaps and gaps.

Building walls

The walls in the building will be corrugated. Its installation starts with the longest wall. Fastening can be done with a screwdriver and self-tapping screws. When installing corrugated board, do not use more than 6 self-tapping screws per square meter. The sheets are installed with some overlap.

If you want to make the shed not only reliable, but also warm, you should take care of the presence of heat and vapor insulation. Insulation is installed in the voids between the corrugated sheathing and the vertical elements, it can be mineral wool, which should be supplemented with a vapor barrier. You can use plastic siding for interior wall cladding, but other materials will work as well. Everything will depend on the budget and your wishes.

Roof installation

For a shed, a roof made of corrugated board is also perfect. It can be gable, such a structure is usually additionally insulated. If for the construction of the walls you used galvanized corrugated board, then for the roof you can use a corrugated board with a coating in the form of a polymer. This approach will cost a little more, but will protect the structure from the effects of moisture and eliminate corrosion.

To fix the corrugated board, it is necessary to equip the crate. For this, a bar is used. The roofing material is laid with an overlap. The canvases are fastened with self-tapping screws. It is better to choose those that have a rubber gasket, it will provide additional sealing at the joints. If you are faced with the question of how to make a shed from corrugated board, then you can additionally insulate it in the area of the roof. For this, a layer of heat and vapor insulation is installed, which is sewn up with plywood.

An alternative option for making a barn

Having completed a drawing of a shed made of corrugated board, you can decide on which technology to act. However, in any case, it is necessary to start work with a marking of the site. To do this, pegs are driven in the corners of the future structure, the diagonals of the rectangle or square are checked - they must be equal. After that, the twine is pulled, the locations of the racks are marked on it. At these points, a 60 cm shaft is made with the help of a drill. Pipes are mounted inside and poured with concrete mortar of the M200 brand.

First you need to install and fill the supports in the corners. As soon as the concrete grasps a little, fishing lines are tied to the racks - from above and below. They are needed to align the rest of the pillars. Before you build a shed from corrugated board, you must make sure that you have the skills to work with a welding machine. You will need it in the next step to complete the frame.

Methods of work

A 60x40 mm pipe is welded on the top of the pipe. It is necessary to choose a product with a wall thickness of 2 mm. On one of the pipes in the corners, you need to determine the floor level. Using the hydraulic level, this mark is transferred to the rest of the corner posts. Twine is tied at the marks, and then the line is transferred to all other racks. Along the perimeter markings, it is necessary to weld on a 40x20 mm pipe. The same principle is used for the installation of cross members in the center section.

In order to bring a wheelbarrow or a walk-behind tractor into the door, the opening should be made high and wide, its dimensions can be equal to 2x1.2 m.On this we can assume that the base of the shed is made of corrugated board with your own hands, the drawings of which you can find in the article , done.

Installation of roof guides

In the next step, you can start assembling the roof rails. This will require trusses, the length of which is 6.5 m. They are welded on the ground and then installed to the opposite beams. Then the cross sections of the pipe in the amount of 10 pieces are welded into place. The frame is completely ready on this, you can proceed to its primer.

The next step is to make a concrete floor. First you need to install the formwork. It is placed outside the frame with an indent of 10 cm. Crushed stone and brick breaks are laid in the ground. It is necessary to ram the material with a mallet. A piece of brick is laid on the ground, and then you should knock on it until it completely disappears. This will make the base more rigid.

Floor execution

If you are faced with the question of how to make a shed out of corrugated board with your own hands, at the next stage you must perform a thick solution. It is poured, and then aligned along the line. It is important to check the horizontality of the resulting base.

As soon as the mortar sets, you can start pouring concrete of the M250 brand. Its surface is also leveled. Now you can start installing the cladding. First, a waterproofing film is spread on the frame. It is glued together with double-sided tape. It is better to refuse from the usual plastic film, since it will not last long. At the final stage, you can start installing the profiled sheet. After exposing the first canvas, it is screwed on with self-tapping screws. According to this algorithm, it is necessary to act until the work is completed.

Conclusion

At the final stage, the metal shed can be sheathed in the corners with a corner. It is reinforced with rivets and serves as a decorative element, closing small gaps. If you build a shed rather large in area, then it will be possible to use it not only for storing inventory and building materials but also as a workshop.

A ready-made project of a barn for a summer residence made of corrugated board

For these purposes, a shed will be required, since not a single site outside the city can do without at least one non-residential outbuilding.

To build a barn, it is not necessary to involve construction firms or teams of professional workers; it is quite possible to erect it with your own hands. It can be done in many different ways and from completely different materials, for example, metal.

Such a shed can be given an original appearance and design; it will be distinguished by the highest degree of its reliability and ease of installation. Compared to sheds and, it will stand out for its strength and will not require any specific knowledge and skills for construction.

An example of a prefabricated metal shed for a home or summer cottage

The galvanized surface is known for its reliability during operation, it will protect the metal shed from adverse weather conditions and metal corrosion, and the reinforced roof of such a structure will withstand winter snow blockages. This practical self-made design will become simply irreplaceable at any summer cottage.

Choosing a place to build a barn

Before starting construction work, it will be necessary to choose a place where a metal shed will be built.

Site preparation and installation of a shed frame made of metal pipes

Each owner determines it independently, depending on their personal preferences, based on the size of the site. If you care about the appearance of the site as a whole, it will not be advisable to build a barn in the most conspicuous place in front of the house. It is advisable to choose the optimal territory so that the house obstructs the shed as much as possible.

At the same time, a metal building can be painted with your own hands with your favorite type of paint and in any color, which will help it to merge with the environment as much as possible and harmoniously fit into the design of the site. One has only to make sure that the shed is not located in a lowland, where excess water accumulates from excessive precipitation.

Of course, many materials and tools are now available that increase resistance to undesirable weather conditions, but too frequent contact with moisture will still not benefit the building.

Slab foundation for a metal shed

General description of metal sheds

Usually, such sheds of standard design are assembled by hand, right on the spot from metal sheets and profiles, without the involvement of craftsmen or the use of special mechanisms. When the location has already been selected, a flat and level surface must first be prepared for the shed.

The base can be a wooden bridge or paving slabs, the main thing is to lay it flat and, at the same time, it is necessary that the base be sufficiently rigid.

These conditions must be met in order to avoid deformation of the frame during operation, which in the future may lead to breakdowns and difficulties in opening and closing the doors.

The frame of the barn consists of galvanized profiles that are not subject to rust and corrosion. Optimal material under such a frame is corrugated steel.

Shed frame device made of metal profiles

The standard wall thickness is usually half a centimeter, and the frame should be twice as wide.

Metal sheds for summer cottages allow you to make multi-leaf sliding doors in them with your own hands, which will be especially convenient if you plan to keep motorcycles, scooters or other vehicles in such sheds. If you do not plan to use the shed as a garage, then such doors can still come in handy, especially when you have to bring some large items into it.

In addition, sliding doors help save space, and in winter they open much easier and easier than ordinary ones, since they do not require clearing the surrounding space from snow and ice. Do not forget about the ventilation grilles, which will help to ventilate the interior and will not allow the air to stagnate, which will also prevent the appearance of mold on the walls.

The technology of self-construction of a metal barn

If you decide to build such a shed with your own hands, then for this you will need the following tools and materials:

A variant of the project of a metal shed from a profile for self-construction

corner Grinder("Grinder") and spare wheels for it;
welding machine and face shield for safety during work;
drill;
construction drill;
measuring instruments such as - tape measure, corner, rulers, building level;
hammer, sledgehammer;
shovel;
thick fishing line;
nail puller;
riveter;
clamps;
screws, nails, screws;
waterproofing material;
round and shaped pipes;
galvanized corrugated board;
gravel;
cement;
wooden slats and corners.

The list of required materials and tools turns out to be quite solid, it will require appropriate financial investments, but such a building with your own hands will still come out cheaper than a brick one and more reliable than a wooden one.

Option for a barn made of galvanized iron sheets

If everything you need has already been purchased and prepared, then you can proceed to the first stage of the construction work itself. First you need to measure the already thought out dimensions of the future shed on the site, and drive temporary pegs into the ground at the corners of its area.

After that, you need to check the diagonal - if it completely coincides, then a thick fishing line is stretched between the hammered pegs, guided by which you can drive in a few more new pegs.

Their number depends on the size of the garage area, and it will be possible to navigate in this regard already in the process of work.

After this has been done, it is necessary to make holes 50-70 cm deep with the help of a construction drill.

When the above-described blanks are built with their own hands, you can start making the concrete mixture. The optimal ratio for manufacturing is 5 buckets of water for 1 bucket of cement.

In order not to return to this procedure many times, you can get a large amount of mixture at one time, for example, using an old waste bath.

With the help of the resulting mixture, it is initially necessary to concrete four pipes in the corners of the area marked at the construction site. Further, the pipes can be connected with thick fishing line, as was the case with the pegs, but this can only be done when the concrete begins to harden and the pipes begin to stand firmly in their places.

The stretched line will help you concreting other pipes around the perimeter faster and more accurately. The concrete hardening process will be completed only after two days. When this happens, it will be possible to proceed to the next stage of construction - to weld the frame of the barn. To do this, along the entire marked perimeter, a profile pipe with thick walls will be welded to the top of the pillars.

Drawing with the dimensions of the frame of a metal shed

To build such a frame, a 60/40 or 70/50 mm pipe is suitable. Smaller pipes cannot be used for such a frame. The entire weight of the roof of the building rests on them. It is extremely important to ensure that the joints are not in the middle of the pipes, but with a slight shift to the side by about 1.5-2.5 cm, this will facilitate the work when sheathing the shed.

In the next step, using a marker, on the lower parts of the corner pipes, it is necessary to make marks that will be the level of the floor. Here again you will need a thick fishing line, which will need to connect the received marks to each other, and already with the help of it apply the same marks on the remaining pipes.

Focusing on the marks around the perimeter, but already from below, the profile pipes are welded again, here you can already use thinner 40/20 or 50/30 mm. After that, the frame of the upper and lower parts of the future shed will be ready.

Step-by-step instruction barn frame assemblies

It remains only to finish the middle by welding transverse pipes or beams to the walls. The number of cross-sections on each of the walls is determined solely by the height of the building.

Only one transverse is enough for a 2-meter height, but if the shed is higher, then several pieces are already required in order to give the frame structure more rigidity, strength and stability. On one of the walls it is necessary to leave an opening for the door. Doors measuring 2x1.2 m will be quite enough to carry bulky items inside.

This is followed by one of the most difficult stages - the manufacture and installation of trusses. It is necessary to take this moment with the greatest seriousness, since the reliability of the shed roof and its durability will depend on the quality of the trusses and their competent fastening.

You can make the highest quality farm by the following method:

Diagram of a farm device for a barn

connect three profile pipes 60/40 or 70/50 mm;
set the truss belts parallel;
weld the truss belts in several places to the base so that they do not have the opportunity to move or undergo deformation;
cut the potholders with a grinder.

If you strictly follow all four points, you will get a high-quality and even farm. But for its installation, an assistant will be required, since it is practically impossible to weld a heavy part at a height alone, and it is practically impossible to do this qualitatively. Transverse profiles (their number depends on the size of the barn, but on average there should be about 10 of them), which will connect the top of the structure into a single whole, it will be possible to weld alone.

These profiles will be needed to provide support and ease of fastening the corrugated board. On this, the frame of the barn is completely ready.

An example of strengthening the frame of a farm building made of metal

Having completed the frame, you can start building the floor, for this you first need to. Formwork boards can be connected to each other using self-tapping screws, and their weakest places can be strengthened with stones or bricks so that they do not deform and do not bend under the weight of concrete.

After installing the formwork, the site must be covered with rubble. This will reduce the consumption of concrete and will contribute to the creation of a monolithic surface during pouring. You can fill the floor alone, but if the area of the shed is too large, then it is better to also find helpers to save time and energy. On average, the thickness of the fill layer should be 10-12 cm.
A few days later, when the floor has hardened, it will be possible to sheathe the frame. By the way, it is preferable to refine the frame from the roof. First of all, on the floors, it is necessary to spread several layers of waterproofing film.

The film is needed in order to protect the interior from condensation that will form on the corrugated board. In addition, it will protect against precipitation from entering the shed through the cracks that may form between the walls and the roof.

It doesn't matter what material is used for the roof - corrugated board or slate, the main thing is to correctly position its first sheet. In this case, it is necessary to monitor the protrusion of the sheet in front and on the side of the roof.

An example of a slate barn roof

After the sheet lies flat, it can be screwed on with self-tapping screws, and the rest of the sheets will already be easier to fasten, focusing on the first.

Wall cladding is carried out in exactly the same way as roofs. The professional sheet is evenly applied and fastened with self-tapping screws, if any extra parts protrude, they can be cut off with the help of a "grinder". It is better to sheathe the door not on hinges, but by removing the frame and placing it on some flat surface, this will add accuracy and allow it to withstand all the necessary gaps. After finishing the trim, the door can be hung in place.

The corners of an already finished shed can be closed using a decorative corner, which is fastened with rivets. This is not only a decorative element in the design of the barn, it will close all kinds of cracks and prevent moisture from entering through them into the room.

This completes the construction of the barn, now you can equip it from the inside: put shelves, hang shelves and fill them with property that will be stored there.

Good luck and success in the construction of such a useful room, which will be useful to you more than once!

The house can be stone or wooden, one-story or multi-story. But the presence of only one residential building, albeit very comfortable and cozy, will not be enough for permanent residence outside the city. It will be necessary to store garden and agricultural tools, any blanks and other equipment, which, as a rule, are not placed in the house. A finished project of a shed for a summer residence made of corrugated board For these purposes, a shed will be required, since not a single site outside the city can do without at least one non-residential outbuilding.

Benefits of metal sheds

An example of a prefabricated metal shed for a home or summer cottage

The galvanized surface is known for its reliability during operation, it will protect the metal shed from adverse weather conditions and metal corrosion, and the reinforced roof of such a structure will withstand winter snow blockages. This practical self-made design will become simply irreplaceable at any summer cottage.

Choosing a place to build a barn

Before starting construction work, it will be necessary to choose a place where a metal shed will be built.

Of course, many materials and tools are now available that increase resistance to undesirable weather conditions, but too frequent contact with moisture will still not benefit the building.

Slab foundation for a metal shed

General description of metal sheds

The base can be a wooden bridge or paving slabs, the main thing is to lay it evenly and, at the same time, it is necessary that the base is sufficiently rigid.

These conditions must be met in order to avoid deformation of the frame during operation, which in the future may lead to breakdowns and difficulties in opening and closing the doors.

The frame of the barn consists of galvanized profiles that are not subject to rust and corrosion. The optimal material for such a frame is corrugated steel.

The device of the frame of a barn from metal profiles The standard wall thickness is usually half a centimeter, and the frame should be twice as wide.

Shed with sliding doors There are models of so-called quick disassembly sheds. A similar metal shed, built with your own hands, is distinguished by both simplicity of design and quick dismantling if necessary.

The technology of self-construction of a metal barn

If you decide to build such a shed with your own hands, then for this you will need the following tools and materials:

A variant of the project of a metal shed from a profile for self-construction

angle grinder (grinder) and spare discs for it;
welding machine and face shield for safety during work;
drill;
construction drill;
measuring instruments such as - tape measure, corner, rulers, building level;
hammer, sledgehammer;
shovel;
thick fishing line;
nail puller;
riveter;
clamps;
screws, nails, screws;
waterproofing material;
round and shaped pipes;
galvanized corrugated board;
gravel;
cement;
wooden slats and corners.

Option for a shed made of galvanized iron sheets If everything you need has already been purchased and prepared, then you can proceed to the first stage of the construction work itself. First you need to measure the already thought out dimensions of the future shed on the site, and drive temporary pegs into the ground at the corners of its area.

After that, you need to check the diagonal - if it completely coincides, then a thick fishing line is stretched between the hammered pegs, guided by which you can drive in a few more new pegs.

Their number depends on the size of the garage area, and it will be possible to navigate in this regard already in the process of work.

After this has been done, it is necessary to make holes 50-70 cm deep with the help of a construction drill.

When the above-described blanks are built with their own hands, you can start making the concrete mixture. The optimal ratio for manufacturing is 5 buckets of water for 1 bucket of cement.

In order not to return to this procedure many times, you can get a large amount of mixture at one time, for example, using an old waste bath.

Drawing with the dimensions of the frame of a metal shed To build such a frame, a 60/40 or 70/50 mm pipe is suitable. Smaller pipes cannot be used for such a frame. The entire weight of the roof of the building rests on them. It is extremely important to ensure that the joints are not in the middle of the pipes, but with a slight shift to the side by about 1.5-2.5 cm, this will facilitate the work when sheathing the shed.

Outside the city, a necessary building, which is simply impossible to do without, is a barn. At the dacha, he will also become an indispensable assistant for many. It is not difficult to make it using metal, if you have at least a little welding skills.

The cost of such a building is much less than that of brick ones, but it is not inferior to wooden counterparts, therefore, it is profitable to build a shed from a profile pipe with your own hands from an economic point of view.

The structure can be both prefabricated and capital. There is a separate solution for those who have chosen the capital option.

Work begins with a concrete floor. It is poured onto the surface of the base, the preparation of which is carried out in advance. But the construction of a wooden floor covering is also allowed.

Plank flooring requires a special approach.

It is necessary to take a profile pipe with thick walls, with a section of 60 by 40 or 60 by 60 mm.
You will also need a corner whose wall thickness reaches 4-5 millimeters.

Parts can be either metal or wood. They will be needed when we start building a shed frame from a profile pipe with our own hands.

It is possible to create a floor where there are no logs if the structure is small. The harness consists of corners with 4-6 mm thickness, with a side of at least 10 cm. The boards will then rest on the corner shelf.

The main thing is that the thickness of the board is at least 4 cm.... Additional support is needed if the span is large enough. To do this, it is enough to take a profile pipe, the diameter of which corresponds to the characteristics.

Metal body and wooden floor

The prefabricated metal structure, like the collapsible one, is made of wall frames. They are welded separately. Bolts are used for the connection.

A profiled sheet is used as a cladding. It is quickly and easily assembled by hand. The roof is also recommended to be made using a professional sheet.

Such structures are easy not only to build, but also to dismantle, if necessary. They are put on for one season in summer cottages, which are not additionally protected in any way.

In addition, the industry produces ready-made metal structures that can be assembled on site like a designer. They are produced by both domestic and foreign manufacturers, including Chinese ones.

We build a barn using a metal profile

For example, let's build a building with our own hands measuring six and a half by four meters. The front wall has a height of 2.5 meters. The back wall is slightly smaller - 2.15 m.

It is desirable to make the floor concrete. This is true if nothing is stored inside, only tools. Next, we build a shed from a shaped pipe.

We take racks from steel round pipes with a diameter of 6 cm. Such pipes are easy to find in private households, but you can choose other diameters. A shaped pipe with a rectangular section is used to create a rack with intermediate straps.

Its diameter is 40 by 20 millimeters or 40 by 60. The walls should be of the same thickness up to 2 millimeters.

The consumables will be as follows:

These materials are only needed to build the frame. Do not forget about fasteners for concreting and other types of consumables.

For the lathing, you need a set of wooden slats. They need to take 6 pieces with a length of 6 meters. The diameter should be within 5 by 2.5 centimeters.
Welding is not complete without electrodes and rivets; self-tapping screws are also needed.
1 roll of waterproofing material is required.
Gravel in the amount of 7 tons.
Cement, 16 bags.

This is part of the answer to the question of how to build a barn from a shaped pipe.

Instructions on how to build a barn with your own hands

Work begins with marking on the site. Pegs should be driven in the corners, and then - check the diagonal. The twine can then be pulled only if everything is smooth.

This detail is important for marking the locations where the posts will be installed. Shafts up to 60 centimeters deep are made in places marked with a drill.

Metal pipes are placed in them. We take concrete solution of grade M200 minimum, fill in everything.

The racks are poured in the corners immediately after placing them. Fishing lines are tied to them when the concrete hardens a little. They should be both below and above. The rest are aligned according to the first parts fixed in place.

Next, the metal frame is welded. A 60 x 40 mm pipe is welded at the top of the structure. Its wall thickness is 2 millimeters. On the corner pipes, it is necessary to mark the level where the floor will be located.

We use the water level to transfer the marks to other parts of the structure. Based on these marks, the twine is tied. Then everything is transferred to other racks.

A pipe 40 by 20 millimeters is tied around the perimeter, the main thing is to correspond to the marking. The crossmembers in the middle are welded according to the same principle. You will need two pipes for sure. At this stage, the metal frame for the barn can already be considered assembled.

Building Further - Next Steps

Then the guides for the roof are assembled with their own hands. At first metal structure welded on the ground, and then attached to beams that are opposite each other.

After that, you will need a primer to help the barn not rust.

The concrete floor is prepared separately. It all starts with the installation of the formwork. It is exposed outside the frame, stepping back 10 cm. The boards are fixed with pegs. And propped up using bricks. Then the concrete will not press on the structure, push it apart.

Broken brick or crushed stone is driven into the prepared site.
An ordinary mallet is also suitable for this.
We lay the broken brick on the surface of the soil and drive it into the ground.
The result is a stiffer base. In addition, the adhesion between the level ground and the ground is then improved.

Lighthouses are placed on the solution, which is still thick. These are flat slats in the form of boards, with a diameter of 25 by 50 mm. They are leveled along a special line.

We mark several points at the ends of the strapping at the bottom, located on opposite sides. You need to pull the fishing line between them. Beacons-panels are placed along it after the horizontal position has been checked.

What other steps are needed to build a barn from a shaped pipe?

You need to wait a little until the solution on the surface of the lighthouses becomes dry. Then everything is poured with concrete, brand M-250.

They proceed to do-it-yourself installation of the sheathing from the profiled sheet. It is best to start with the main part of the roof. Laying a film with waterproofing properties is the first step, then water will definitely not get on your head.
First there is one panel, and on it - the next. Step - 10 cm. For gluing, use an adhesive tape with two sides.
The waterproofing is spreading gradually, starting from the bottom and ending with the top.
The next step is the installation of the profiled sheet itself. The main thing is to set the first sheet correctly, this applies to any sheet material. Further work in this case will be easy and smooth. For measurements, squares, rulers and so on are used.
The sheet is screwed on with self-tapping screws after it has been exposed.
Roughly the same principle is followed when it comes to side cladding.

It can take up to 20 self-tapping screws to fix one sheet.

What's in the final stages?

A frame for the door () is cooked from a profile pipe 40 by 20 millimeters. Loops without welding to the structure also cannot be attached. The door can be sheathed separately from the rest of the parts, and then hung ready-made.
The shed is sheathed around the edges with a metal corner. The sheet itself is riveted. This is necessary not only for decorative decoration, but also for closing any possible cracks.

As a result, the room is 26 square meters. This is more than an impressive area. As you can see, it's not so difficult to build everything with your own hands.

About some features of construction

The metal profile is most often used for upholstery in sheds, instead of boards. The material is easier to install, compared to its counterparts, it is more durable and more affordable.

But sometimes the plank upholstery still gives more rigidity. It would be nice to strengthen the frame by installing jibs, if the metal-profile spans in the sheds are large enough.

For the metal profile and its fastening, special washers are needed - galvanized, with additional linings. But you can also put the usual varieties if the above details are missing.

Video 3

Corner elements also need special ones. It is recommended to lay the roof itself on the gasket. Otherwise, a lot of unnecessary noise will appear during the rain.

When connecting metal with a metal profile, they resort to using ordinary self-tapping screws, with heads similar to the tip of a drill. Both parts must be drilled with these drills.

The main thing is to use a good screwdriver with sufficient power. Sometimes a hole is drilled first, and then the sheet is fixed with a self-tapping screw.

A do-it-yourself shed from a profile pipe will be ready quickly. Watch the video materials presented by us, and it will not be difficult to build everything with your own hands. Below are the drawings.

Economic buildings must be functional and "convenient" to use. The construction of a barn in the country almost always comes down to the construction of a not the most optimal option due to the fact that the homeowner does not imagine the full range of purposes of the facility being built. Will it only be used for warehousing or for other functions?

Regardless of the exact purpose, one of the best choices is a frame shed for any purpose. Let's discuss its benefits by numbers!

One! Various standard sizes.

The big advantage of such designs is their standardization and the availability of ready-made offers on the market. The cost of building a turnkey barn is very easy to calculate. They do not require the installation of a foundation, and therefore it is enough to simply indicate the required size (examples: 6x3 or 3x6, 3x2, 4x2, etc.). You can choose both large and small-sized options.

Two! Versatility.

You can use a frame panel house for a variety of needs. From the storage of tools, supplies, fertilizers and feed to the placement of a subsidiary farm. The use of such outbuildings for animals and poultry is allowed.

Three! Inexpensive and high quality material.

Let's briefly go over the main advantages of wood that has undergone preliminary preparation and processing:

Low prices. The cost of wood is lower compared to most types of bricks, concrete and metals.

Small specific gravity. Prefabricated frame houses are lightweight, do not create a load on the ground, and can be transported without disassembly if necessary.

These advantages of the material make it ideal for use in Moscow and the Moscow region, where the cost of construction is high, and therefore the construction of buildings from timber and timber in general is the best choice.

Four! Fast construction of standard objects.

You can order an economy version with a pitched roof, or you can choose a more expensive project with a veranda, multi-layer insulation and other improvements. In this case, the standard building components will be offered to you in advance. You can order production by individual sizes and drawings, but this is almost always overkill. The generic models are very good.

Five! Cheap and cheerful!

If you find out how much it costs to build objects from different types of materials, a frame-panel shed will almost always win in comparison. Low price and at the same time unlimited possibilities in terms of household applications make frame sheds the most appropriate investment!

The word barn in translation from Turkish means a palace. In our understanding, this is an auxiliary detached building intended for household needs. The need to have such a room makes us think about how to build it quickly and at the lowest cost. We offer to build a barn without the involvement of craftsmen, i.e. on their own using profiled metal as a material for walls and roofs.

Calculation of the cost of a shed from a profiled sheet

We will build a shed on an unprepared site and with our own hands, which means that we only include the cost of materials in the estimate. For a shed made of corrugated board you will need:

cement, crushed stone, sand, reinforcement or metal rod;
sheet metal;
supports for fastening the profiled sheet;
profiled pipe for transverse and roof mounting;
insulation;
electrodes;
corrugated board and hardware for fasteners;
skates, corner bars.

We use standard tools for installation.:

concrete mixer;
electric shears, drill, screwdriver, impeller, riveting device;
welding machine;
measuring accessories.

The main part of the costs is borne by 2 items: profile pipe and corrugated board. For the construction of the walls, we use the most economical version of the facade corrugated board - and for the roof. We choose profiled metal with such parameters.:

purpose (front /);
zinc content;
sheet thickness;
profile height;
type of polymer coating, its thickness and color.

Ideally, a professional sheet is suitable for us:

for walls - Bulat 10 with a thickness of 0.4 mm with polymer coating, color RAL 7024.
for roofs - 0.45 mm thick with polymer coating, color RAL 7024.

The profile pipe will be needed in two sizes 40X20, for the connecting elements of the frame and 80X80 for the base. The cost of the rest of the material is 1/5 of the total cost.

Construction procedure

Profiled sheeting has many characteristics that allow it to be used in the construction of structures, but there are limitations that must be taken into account in the design, even if we are building a barn.

Draw the sketch so that the slope of the slopes is at least 15 °. The plumb lines of the roof protrude 30 cm beyond the perimeter of the walls. We equip the entrance with double-leaf gates made of profiled sheet, opening outward. We will make natural ventilation in the barn.

Foundation, supports

We start the process by leveling the site and removing soil 10-15 cm thick for clay soils and 15-30 cm for chernozems. We mark the perimeter and dig trenches along it for the strip foundation. The weight of the structure is small and the load extends to the supports, so we will not make the foundation deep. Its main function is waterproofing the premises.

In the dug trench in the places where the supports are installed, we make holes 1 meter deep, install in them previously prepared supports from a profile pipe with a wall side of 80 mm. We weld a 30x30 cm sheet metal heel to one of the ends. We set the supports along a plumb line and along the axis of the trench. For the reliability of the foundation, we connect several supports with a rod. We fasten it to the posts with wire. We put the formwork from boards 20 cm high above the level of the planned floor and fill it with concrete. We prepare the solution in the proportion of 1 part of cement grade 400, 3 parts of sand, 3 parts of crushed stone.

The foundation is ready for further work one week after pouring. So as not to waste time, we make a concrete floor screed. We proceed to the installation of the frame.

Roof and wall installation

We cut the pipe for transverse fasteners. We weld between the supports so that there is one plane along the facade. We will lay the profiled sheet on the outside, and on the inside with sections that form supports. We connect the upper ends of the supports along the perimeter. We put 2 logs in each section if the height is up to 2.5 meters and 3 if higher.

After welding the wall frame, go to the roof. Using beams, we connect opposite supports installed along the length of the shed. We use a pipe 80x80 if the spans are more than 3 meters, and 40x40 if less. We choose the total length of the beam so that it protrudes beyond the perimeter of the shed by 300 mm on each side, forming an overhang. In the center of the span, we weld vertical posts with a height that forms the desired slope. We make the calculation for a right-angled triangle through the known leg (half the length of the beam or the width of the shed, taking into account the overhang) and the angle we need.

H = K x Tg (15 ° or another angle), where H is the height of the rack, K is half of the beam, Tg is the tangent of the angle (calculated from tables or in any calculator).

We connect the racks with the ends of the beams, forming rafter leg... The truss needs to be strengthened with reinforcement ties. We cut the rod so as to connect the right angle to the rafter, dividing it in half. Then, with another segment, we connect the previously welded piece to the beam. We install transverse stretch marks, which will simultaneously serve as a crate. We use a 40x20 mm profile pipe with a length equal to the length of the roof. We connect the beams with similar elements. We weld the stretch marks with an overlap on top. The distance between the rows is 500 mm. We will attach a corrugated roof to these elements after installing a waterproofing film.

We will use the outer trusses as the frame of the pediment. To do this, instead of reinforcing reinforcement, we divide the rafter into three parts and install vertical jumpers between it and the horizontal beam. We make the racks from a 40x20 profile pipe. We paint the entire structure.

To protect against moisture and condensation between the rafters, we roll out the roofing film. We begin to lay from the overhang to the top. We overlap each new layer.

The length of the corrugated sheet is determined by the length of the roof slope. We order sheets of the required length from the manufacturer. We lay the first sheet with a ledge on the pediment. The next one is overlapped.

We screw it into the lower wave with painted metal screws (screws 25 mm long) with rubber seals. We screw in the screws strictly perpendicular to the crossbars in order to avoid skewing and, as a result, roof leakage. One more important detail is the correct screw tightness. Excessive pressure of the self-tapping screw can cause damage to the corrugated board coating and subsequent corrosion. Insufficient adhesion to promote moisture ingress.

We install the skate, screwing it into the upper wave with self-tapping screws. We use screws 75 mm long. We install all self-tapping screws through one wave. We pass to the pediment.

We cut the sheet in an angular shape using electric scissors. We will lay it horizontally, so we start from the bottom. We fasten with self-tapping screws to the vertical posts of the extreme truss. The next sheet is overlapped. We fasten the corner profile to the roof covering, which prevents the sheet from breaking off when strong wind... We fix it in the same way as the ridge, screwing the screws (75 mm) into the upper wave from the side of the roof and pediment.

Installation of a profiled sheet from the front and inside of the shed

The first step is to mount the facade. We put the sheets vertically. We set the first one from the corner. Fasten to the crossbars. The next one is overlapped by one wave. We connect the corner sheets with a special profile strip. We fasten the corrugated board to the lower wave, and the corner to the upper one. Self-tapping screws are installed through the wave into each cross member.

Moving on to inner lining by initially installing insulation. We use 40 mm thick polystyrene sheet. We cut to size the sections formed by the uprights and crossbars. We attach to the back of the installed profiled sheet using double-sided tape or adhesive tape. We mount the same insulation under the roof in the sectors formed by rafters and guy wires. We finally attach the foam to the stretch marks with the help of the slatted sheathing.

Moving on to the interior cladding. We will mount between the supports, since these elements can be used for arranging shelves, fixing various devices and other things. We sheathe the ceiling in the same way, using the braces previously installed on the beams for fastening.

The corrugated board is attached in the same way as on the facade. We cut to length using metal scissors. We fasten with self-tapping screws overlapping by one wave. We carry out the electrical wiring along the profiled sheet in protective boxes or sleeves. For installation, we use the fastening of the profiled sheet. We turn to the manufacture of swing double-leaf gates.

Gates to the shed from the profiled sheet

Most quick way manufacturing is the formation of a structure in place. What do we mean?
The gates are made in the following sequence:

Between the supports at the bottom and at the top, we mount by welding 2 jumpers with an indent from the foundation up to 5 cm;
We connect the installed jumpers with 4 racks. 2 we place closely along the supports, and 2 - along the axis of the gate;
We weld the hinges to the supports and 2 racks;
Using a grinding and cutting machine (impeller), we cut horizontal bridges in 6 places. Between the posts fixed along the axis (middle) of the gate and between the supports and posts on which the hinges are welded. We bring the cut points to the same plane with the racks and grind. We received 2 doors with hinges installed;
We weld the ears for padlock on the middle racks and paint the structure;
We mount the corrugated board. We take 2 sheets and cut out the grooves for the lock. We install the first sheet on one sash, starting from the rack, and the second on the other so that it overlaps, on the first. Then we mount the rest of the sheets.

During installation inner cladding We do not overlap the sashes. We glue the perimeter of the gate with a sealant. The material is attached to the corrugated board with the sticky side, so that it protrudes by the amount of compression.

A shed is a necessary attribute of any suburban area. It is necessary for storing garden tools, tools, equipment. Recently, a barn from a profiled sheet has been very popular among summer residents and owners of personal plots.

The note: The professional sheet is used for the construction of fences, walls or ceilings, and the corrugated board is used for the installation of the roof. All these names are one material.

A barn can be a permanent structure or prefabricated. Capital in progress with poured concrete floors, and on wooden. In the case of a plank floor, for the upper straps are used fat-bodied shaped pipes. Floor logs are placed on the harness.

The frame for the barn is welded separately. The cladding can be easily mounted or dismantled. The roof is made of the same material.

Basically, such buildings are made collapsible and installed for the summer in unguarded summer cottages. After the end of the season, the building is dismantled and put into storage.

On sale there are ready-made metal profiles, assembled by the type of constructor. However, building such a structure on your own will not be difficult.

The structure diagram of a profile shed is as follows:

Choice suitable place for construction;
Cleaning the site. For this, the top layer of the earth is removed by fifty centimeters;
A diagram of a barn is drawn in size;
The necessary materials are being prepared;
Installation work.

Features of choosing a place for adjustment

By sanitary standards outbuildings should be located at least twelve meters from a residential building. And also should be taken into account: the maximum permissible slope of the terrain, distance from gas pipes, wells, wells and power lines.

It is also important to take into account the convenience of the approach to construction in case of heavy loads, etc. It is not advisable to place it on a site suitable for planting vegetables and flowers. Basically, the owners try to hide such a building behind the house, closer to the garden or in the back of the garden.

The marking of the site is done using pegs and pulling the twine.

List of materials

When choosing a profiled sheet, special attention should be paid to product labeling. So, the sheets going for finishing the facade have a numerical index 8-21 and are marked with the letter C.

Important: C8 and C10 metal-profile sheets are used only for interior wall decoration, and all the rest can be used for exterior.

For self-made you will also need such materials as:

Edged boards;
bar section from 10 to 15 cm;
fasteners;
cladding material;
cement and gravel in case of building a monolithic foundation.

Foundation device

Structures made of profiled sheets, as a rule, have a small mass, therefore, they can be built on blocks or on a concrete belt with a slight deepening. If you decide to make a monolithic foundation, then the size of the slab should be made slightly larger than the area of the shed itself. At the corners of the base, pits 0.5 m deep are dug, at the bottom of which rubble is poured and well rammed. Then it is mounted in these pits, vertical metal posts are mounted and filled with a mixture of cement and sand at a rate of 1: 3. Formwork is made around the perimeter of the slab using boards with a width of 0.8 m.

Important: Metal props must be located inside the formwork.

Frame device and sheathing

After the mortar has dried, beams and corners are attached to the racks, and then roof girders are installed. All fasteners must be reliable so that the frame for the profiled sheets is strong.

The bottom rail serves as the base for the flooring and supports the vertical supports. The beam is fastened with grooves and spikes, reinforced with metal corners. The floors are laid with a transverse pitch of up to 0.6 m. Window and door openings are integral parts of the frame and are built simultaneously with it.

When erecting walls, paronite gaskets are placed in them for thermal rupture. Insulation boards are mounted with dowels, which are closed from above with films to prevent moisture and wind from entering. To align the front surface, use U-shaped guides attached to the bracket. There must be an air gap between these guides and the film. Then they begin to attach the profiles along the vertical guides horizontally.

The roof structure is usually pitched. A waterproofing material is spread over the roof frame. Sheets are laid overlap and glued with double-sided tape.

The main thing here is to correctly set the first sheet. Therefore, you need to carefully measure everything using a square and a level. It is placed in a wave in the ledge, screwed on with self-tapping screws.

The note: It is not advisable to use ordinary plastic wrap, since it will last no more than five years.

After the roof is installed, the building is cladding. For this, it is advisable to use whole vertical sheets that do not have horizontal joints. First, also lay the waterproofing material.

If the lathing is performed with horizontal sheets, then the installation should start from the bottom up, and always with an overlap on the previous ones. Where individual parts come into contact, a sealant must be used to prevent leaks.

The door frame is welded using a 40 * 20 mm profile pipe, with a loop welded on. It is sheathed separately, and then arranged on the frame.

At the corners of the shed, metal corners are made, fastened with rivets. This helps to hide small gaps at the joints and serves as a decorative element.

Profiled sheet is an excellent material in addition to building a barn for many different buildings. A fairly practical gazebo can be built from profiled sheets, as well as Summer shower, carport, porch, etc. Such a canopy can be assembled with your own hands in a few hours.